remove variant

fixed MSboard, game class prep, power impr.

.gitignore

@@ -3,3 +3,5 @@
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/ipch
+**/.DS_Store
+manufacturing.zip

.vscode/tasks.json

@@ -0,0 +1,17 @@
+{
+	"version": "2.0.0",
+	"tasks": [
+		{
+			"type": "PlatformIO",
+			"task": "Build",
+			"problemMatcher": [
+				"$platformio"
+			],
+			"group": {
+				"kind": "build",
+				"isDefault": true
+			},
+			"label": "PlatformIO: Build"
+		}
+	]
+}

README.txt

@@ -0,0 +1,6 @@
+flashing
+
+macos:
+brewl install stlink
+
+st-flash --reset --freq=4M write firmware.bin 0x8000000

__boards/stm32l031k6.json

@@ -0,0 +1,45 @@
+{
+    "build": {
+      "cpu": "cortex-m0plus",
+      "extra_flags": "-DSTM32L031xx",
+      "f_cpu": "32000000L",
+      "mcu": "stm32l031k6t6",
+      "product_line": "STM32L031xx",
+      "variant": "STM32L031K6",
+      "variants_dir": "variants"
+    },
+    "debug": {
+      "default_tools": [
+        "stlink"
+      ],
+      "jlink_device": "STM32L031K6",
+      "onboard_tools": [
+        "stlink"
+      ],
+      "openocd_target": "stm32l0",
+      "svd_path": "STM32L0x1.svd"
+    },
+    "frameworks": [
+      "arduino",
+      "cmsis",
+      "mbed",
+      "stm32cube",
+      "libopencm3"
+    ],
+    "name": "STM32L031K6",
+    "upload": {
+      "maximum_ram_size": 8192,
+      "maximum_size": 32768,
+      "protocol": "stlink",
+      "protocols": [
+        "jlink",
+        "cmsis-dap",
+        "stlink",
+        "blackmagic",
+        "mbed"
+      ]
+    },
+    "url": "https://developer.mbed.org/platforms/ST-Nucleo-L031K6/",
+    "vendor": "ST"
+  }
+  

__variants/NUCLEO_L031K6/PeripheralPins.c

@@ -0,0 +1,196 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2019, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ * Automatically generated from STM32L031K(4-6)Tx.xml
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Note: Commented lines are alternative possibilities which are not used per default.
+ *       If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+  {PA_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
+  {PA_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
+  //  {PA_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - Connected to STDIO_UART_TX
+  {PA_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
+  {PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
+  {PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
+  {PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
+  {PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
+  {PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
+  {PB_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
+  {NC,    NP,    0}
+};
+#endif
+
+//*** No DAC ***
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+  {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {PB_7,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SCL[] = {
+  {PA_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {PB_6,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {NC,    NP,    0}
+};
+#endif
+
+//*** PWM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+WEAK const PinMap PinMap_PWM[] = {
+  {PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
+  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
+  //  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
+  //  {PA_2,  TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
+  {PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
+  //  {PA_3,  TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
+  {PA_5,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
+  {PA_6,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
+  {PA_7,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
+  {PA_8,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
+  {PA_9,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
+  {PA_10, TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
+  //  {PA_11, TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 2, 0)}, // TIM21_CH2
+  //  {PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
+  {PB_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 3, 0)}, // TIM2_CH3
+  {PB_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 4, 0)}, // TIM2_CH4
+  {PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
+  {PB_4,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // TIM22_CH1
+  {PB_5,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // TIM22_CH2
+  //  {PB_6,  TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 1, 0)}, // TIM21_CH1
+  {NC,    NP,    0}
+};
+#endif
+
+//*** SERIAL ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+  //  {PA_2,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_2,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // STLink TX
+  {PA_9,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PA_14, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_14, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PB_6,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RX[] = {
+  //  {PA_3,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_3,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PA_10, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PA_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_15, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // STLink RX
+  {PB_7,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RTS[] = {
+  {PA_1,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PA_12, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PB_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PB_1,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_CTS[] = {
+  {PA_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PA_6,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
+  {PA_7,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PA_11, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {NC,    NP,    0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+  {PA_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PB_1,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
+  {PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MISO[] = {
+  {PA_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PB_0,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
+  {PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+  {PA_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PB_3,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+  {PA_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  //  {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+//*** No CAN ***
+
+//*** No ETHERNET ***
+
+//*** No QUADSPI ***
+
+//*** No USB ***

__variants/NUCLEO_L031K6/PinNamesVar.h

@@ -0,0 +1,25 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+  SYS_WKUP1 = PA_0,
+#endif
+#ifdef PWR_WAKEUP_PIN2
+  SYS_WKUP2 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+  SYS_WKUP3 = PA_2,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+  SYS_WKUP4 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+  SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+  SYS_WKUP6 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+  SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+  SYS_WKUP8 = NC,
+#endif

__variants/NUCLEO_L031K6/ldscript.ld

@@ -0,0 +1,188 @@
+/*
+*****************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Abstract    : Linker script for STM32L031K6Tx Device with
+**                32KByte FLASH, 8KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**   1. Redistributions of source code must retain the above copyright notice,
+**      this list of conditions and the following disclaimer.
+**   2. Redistributions in binary form must reproduce the above copyright notice,
+**      this list of conditions and the following disclaimer in the documentation
+**      and/or other materials provided with the distribution.
+**   3. Neither the name of Ac6 nor the names of its contributors
+**      may be used to endorse or promote products derived from this software
+**      without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20002000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 8K
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 32K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+

__variants/NUCLEO_L031K6/variant.cpp

@@ -0,0 +1,123 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "pins_arduino.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Pin number
+const PinName digitalPin[] = {
+  PA_10, //D0
+  PA_9,  //D1
+  PA_12, //D2
+  PB_0,  //D3
+  PB_7,  //D4
+  PB_6,  //D5
+  PB_1,  //D6
+  PC_14, //D7
+  PC_15, //D8
+  PA_8,  //D9
+  PA_11, //D10
+  PB_5,  //D11
+  PB_4,  //D12
+  PB_3,  //D13 - LED
+  PA_0,  //D14/A0
+  PA_1,  //D15/A1
+  PA_3,  //D16/A2
+  PA_4,  //D17/A3
+  PA_5,  //D18/A4
+  PA_6,  //D19/A5
+  PA_7,  //D20/A6
+  PA_2,  //D21/A7 - STLink Tx
+  PA_15,  //D22 - STLink Rx
+  PB_2,    //D23
+  PB_8  //D24
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief  System Clock Configuration
+  * @param  None
+  * @retval None
+  */
+WEAK void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_PeriphCLKInitTypeDef PeriphClkInit;
+
+  /* Configure the main internal regulator output voltage */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /* Initializes the CPU, AHB and APB buses clocks */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = 16;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
+  RCC_OscInitStruct.PLL.PLLDIV = RCC_PLLDIV_2;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+    _Error_Handler(__FILE__, __LINE__);
+  }
+
+  /* Initializes the CPU, AHB and APB busses clocks */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
+    _Error_Handler(__FILE__, __LINE__);
+  }
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
+  PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+    _Error_Handler(__FILE__, __LINE__);
+  }
+}
+
+#ifdef __cplusplus
+}
+#endif

__variants/NUCLEO_L031K6/variant.h

@@ -0,0 +1,120 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PA10 0
+#define PA9  1
+#define PA12 2
+#define PB0  3
+#define PB7  4
+#define PB6  5
+#define PB1  6
+#define PC14 7
+#define PC15 8
+#define PA8  9
+#define PA11 10
+#define PB5  11
+#define PB4  12
+#define PB3  13 // LED
+#define PA0  14 // A0
+#define PA1  15 // A1
+#define PA3  16 // A2
+#define PA4  17 // A3
+#define PA5  18 // A4
+#define PA6  19 // A5
+#define PA7  20 // A6
+#define PA2  21 // A7 - STLink Tx
+#define PA15 22 // STLink Rx
+#define PB2  23
+#define PB8  24
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        25
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       7
+#define NUM_ANALOG_FIRST        14
+
+// On-board LED pin number
+//#define LED_BUILTIN             13
+//#define LED_GREEN               LED_BUILTIN
+
+// I2C Definitions
+#define PIN_WIRE_SDA            4
+#define PIN_WIRE_SCL            5
+
+//Timer Definitions
+#define TIMER_TONE              TIM2
+#define TIMER_SERVO             TIM21
+
+// UART Definitions
+#define SERIAL_UART_INSTANCE    2 //ex: 2 for Serial2 (USART2)
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA15
+#define PIN_SERIAL_TX           PA2
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #define SERIAL_PORT_MONITOR     Serial
+  #define SERIAL_PORT_HARDWARE    Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */

__variants/STM32L031K6/PeripheralPins.c

@@ -0,0 +1,196 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2019, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ * Automatically generated from STM32L031K(4-6)Tx.xml
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Note: Commented lines are alternative possibilities which are not used per default.
+ *       If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+  {PA_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
+  {PA_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
+  //  {PA_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - Connected to STDIO_UART_TX
+  {PA_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
+  {PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
+  {PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
+  {PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
+  {PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
+  {PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
+  {PB_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
+  {NC,    NP,    0}
+};
+#endif
+
+//*** No DAC ***
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+  {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {PB_7,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SCL[] = {
+  {PA_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {PB_6,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+  {NC,    NP,    0}
+};
+#endif
+
+//*** PWM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+WEAK const PinMap PinMap_PWM[] = {
+  {PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
+  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
+  //  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
+  //  {PA_2,  TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
+  {PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
+  //  {PA_3,  TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
+  {PA_5,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
+  {PA_6,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
+  {PA_7,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
+  {PA_8,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
+  {PA_9,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
+  {PA_10, TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
+  //  {PA_11, TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 2, 0)}, // TIM21_CH2
+  //  {PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
+  {PB_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 3, 0)}, // TIM2_CH3
+  {PB_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 4, 0)}, // TIM2_CH4
+  {PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
+  {PB_4,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // TIM22_CH1
+  {PB_5,  TIM22,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // TIM22_CH2
+  //  {PB_6,  TIM21,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 1, 0)}, // TIM21_CH1
+  {NC,    NP,    0}
+};
+#endif
+
+//*** SERIAL ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+  //  {PA_2,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_2,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // STLink TX
+  {PA_9,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PA_14, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_14, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PB_6,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RX[] = {
+  //  {PA_3,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_3,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PA_10, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PA_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
+  {PA_15, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // STLink RX
+  {PB_7,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RTS[] = {
+  {PA_1,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PA_12, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PB_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PB_1,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_CTS[] = {
+  {PA_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  //  {PA_6,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
+  {PA_7,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {PA_11, USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
+  {NC,    NP,    0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+  {PA_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PB_1,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
+  {PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MISO[] = {
+  {PA_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PB_0,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
+  {PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+  {PA_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {PB_3,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+  {PA_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  //  {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+  {NC,    NP,    0}
+};
+#endif
+
+//*** No CAN ***
+
+//*** No ETHERNET ***
+
+//*** No QUADSPI ***
+
+//*** No USB ***

__variants/STM32L031K6/PinNamesVar.h

@@ -0,0 +1,25 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+  SYS_WKUP1 = PA_0,
+#endif
+#ifdef PWR_WAKEUP_PIN2
+  SYS_WKUP2 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+  SYS_WKUP3 = PA_2,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+  SYS_WKUP4 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+  SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+  SYS_WKUP6 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+  SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+  SYS_WKUP8 = NC,
+#endif

__variants/STM32L031K6/ldscript.ld

@@ -0,0 +1,188 @@
+/*
+*****************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Abstract    : Linker script for STM32L031K6Tx Device with
+**                32KByte FLASH, 8KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**   1. Redistributions of source code must retain the above copyright notice,
+**      this list of conditions and the following disclaimer.
+**   2. Redistributions in binary form must reproduce the above copyright notice,
+**      this list of conditions and the following disclaimer in the documentation
+**      and/or other materials provided with the distribution.
+**   3. Neither the name of Ac6 nor the names of its contributors
+**      may be used to endorse or promote products derived from this software
+**      without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20002000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 8K
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 32K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+

__variants/STM32L031K6/variant.cpp

@@ -0,0 +1,123 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "pins_arduino.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Pin number
+const PinName digitalPin[] = {
+  PA_10, //D0
+  PA_9,  //D1
+  PA_12, //D2
+  PB_0,  //D3
+  PB_7,  //D4
+  PB_6,  //D5
+  PB_1,  //D6
+  PC_14, //D7
+  PC_15, //D8
+  PA_8,  //D9
+  PA_11, //D10
+  PB_5,  //D11
+  PB_4,  //D12
+  PB_3,  //D13 - LED
+  PA_0,  //D14/A0
+  PA_1,  //D15/A1
+  PA_3,  //D16/A2
+  PA_4,  //D17/A3
+  PA_5,  //D18/A4
+  PA_6,  //D19/A5
+  PA_7,  //D20/A6
+  PA_2,  //D21/A7 - STLink Tx
+  PA_15,  //D22 - STLink Rx
+  PB_2,    //D23
+  PB_8  //D24
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief  System Clock Configuration
+  * @param  None
+  * @retval None
+  */
+WEAK void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_PeriphCLKInitTypeDef PeriphClkInit;
+
+  /* Configure the main internal regulator output voltage */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /* Initializes the CPU, AHB and APB buses clocks */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = 16;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
+  RCC_OscInitStruct.PLL.PLLDIV = RCC_PLLDIV_2;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+    _Error_Handler(__FILE__, __LINE__);
+  }
+
+  /* Initializes the CPU, AHB and APB busses clocks */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
+    _Error_Handler(__FILE__, __LINE__);
+  }
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
+  PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+    _Error_Handler(__FILE__, __LINE__);
+  }
+}
+
+#ifdef __cplusplus
+}
+#endif

__variants/STM32L031K6/variant.h

@@ -0,0 +1,120 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PA10 0
+#define PA9  1
+#define PA12 2
+#define PB0  3
+#define PB7  4
+#define PB6  5
+#define PB1  6
+#define PC14 7
+#define PC15 8
+#define PA8  9
+#define PA11 10
+#define PB5  11
+#define PB4  12
+#define PB3  13 // LED
+#define PA0  14 // A0
+#define PA1  15 // A1
+#define PA3  16 // A2
+#define PA4  17 // A3
+#define PA5  18 // A4
+#define PA6  19 // A5
+#define PA7  20 // A6
+#define PA2  21 // A7 - STLink Tx
+#define PA15 22 // STLink Rx
+#define PB2  23
+#define PB8  24
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        25
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       7
+#define NUM_ANALOG_FIRST        14
+
+// On-board LED pin number
+//#define LED_BUILTIN             13
+//#define LED_GREEN               LED_BUILTIN
+
+// I2C Definitions
+#define PIN_WIRE_SDA            4
+#define PIN_WIRE_SCL            5
+
+//Timer Definitions
+#define TIMER_TONE              TIM2
+#define TIMER_SERVO             TIM21
+
+// UART Definitions
+#define SERIAL_UART_INSTANCE    2 //ex: 2 for Serial2 (USART2)
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+//#define PIN_SERIAL_RX           PA15
+//#define PIN_SERIAL_TX           PA2
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #define SERIAL_PORT_MONITOR     Serial
+  #define SERIAL_PORT_HARDWARE    Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */

flash.sh

@@ -0,0 +1 @@
+st-flash write firmware20210720.bin 0x8000000

lib/BatterySense/src/Battery.cpp

@@ -0,0 +1,74 @@
+/*
+ Battery.cpp - Battery library
+ Copyright (c) 2014 Roberto Lo Giacco.
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as 
+ published by the Free Software Foundation, either version 3 of the 
+ License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "Battery.h"
+#include <Arduino.h>
+
+Battery::Battery(uint16_t minVoltage, uint16_t maxVoltage, uint8_t sensePin) {
+	this->sensePin = sensePin;
+	this->activationPin = 0xFF;
+	this->minVoltage = minVoltage;
+	this->maxVoltage = maxVoltage;
+}
+
+void Battery::begin(uint16_t refVoltage, float dividerRatio, mapFn_t mapFunction) {
+	this->refVoltage = refVoltage;
+	this->dividerRatio = dividerRatio;
+	pinMode(this->sensePin, INPUT);
+	if (this->activationPin < 0xFF) {
+		pinMode(this->activationPin, OUTPUT);
+	}
+	this->mapFunction = mapFunction ? mapFunction : &linear;
+}
+
+void Battery::onDemand(uint8_t activationPin, uint8_t activationMode) {
+	if (activationPin < 0xFF) {
+		this->activationPin = activationPin;
+		this->activationMode = activationMode;
+		pinMode(this->activationPin, OUTPUT);
+		digitalWrite(activationPin, !activationMode);
+	}
+}
+
+uint8_t Battery::level() {
+	return this->level(this->voltage());
+}
+
+uint8_t Battery::level(uint16_t voltage) {
+	if (voltage <= minVoltage) {
+		return 0;
+	} else if (voltage >= maxVoltage) {
+		return 100;
+	} else {
+		return (*mapFunction)(voltage, minVoltage, maxVoltage);
+	}
+}
+
+uint16_t Battery::voltage() {
+	if (activationPin != 0xFF) {
+		digitalWrite(activationPin, activationMode);
+		delayMicroseconds(10); // copes with slow switching activation circuits
+	}
+	analogRead(sensePin);
+	delay(2); // allow the ADC to stabilize
+	uint16_t reading = analogRead(sensePin) * dividerRatio * refVoltage / 1024;
+	if (activationPin != 0xFF) {
+		digitalWrite(activationPin, !activationMode);
+	}
+	return reading;
+}

lib/BatterySense/src/Battery.h

@@ -0,0 +1,129 @@
+/*
+ Battery.h - Battery library
+ Copyright (c) 2014 Roberto Lo Giacco.
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as 
+ published by the Free Software Foundation, either version 3 of the 
+ License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef BATTERY_H_
+#define BATTERY_H_
+
+#include <Arduino.h>
+
+typedef uint8_t(*mapFn_t)(uint16_t, uint16_t, uint16_t);
+
+class Battery {
+	public:
+		/**
+		 * Creates an instance to monitor battery voltage and level.
+		 * Initialization parameters depend on battery type and configuration.
+		 *
+		 * @param minVoltage is the voltage, expressed in millivolts, corresponding to an empty battery
+		 * @param maxVoltage is the voltage, expressed in millivolts, corresponding to a full battery
+		 * @param sensePin is the analog pin used for sensing the battery voltage
+		 */
+		Battery(uint16_t minVoltage, uint16_t maxVoltage, uint8_t sensePin);
+
+		/**
+		 * Initializes the library by optionally setting additional parameters.
+		 * To obtain the best results use a calibrated reference using the VoltageReference library or equivalent.
+		 * 
+		 * @param refVoltage is the board reference voltage, expressed in millivolts
+		 * @param dividerRatio is the multiplier used to obtain the real battery voltage
+		 * @param mapFunction is a pointer to the function used to map the battery voltage to the remaining capacity percentage (defaults to linear mapping)
+		 */
+		void begin(uint16_t refVoltage, float dividerRatio, mapFn_t = 0);
+
+		/**
+		 * Enables on-demand activation of the sensing circuit to limit battery consumption.
+		 *
+		 * @param activationPin is the pin which will be turned HIGH or LOW before starting the battery sensing
+		 * @param activationMode is the optional value to set on the activationPin to enable battery sensing, defaults to LOW
+		 *            useful when using a resistor divider to save on battery consumption, but it can be changed to HIGH in case
+		 *            you are using a P-CH MOSFET or a PNP BJT
+		 */
+		void onDemand(uint8_t activationPin, uint8_t activationMode = LOW);
+
+		/**
+		 * Activation pin value disabling the on-demand feature.
+		 */
+		static const uint8_t ON_DEMAND_DISABLE = 0xFF;
+
+		/**
+		 * Returns the current battery level as a number between 0 and 100, with 0 indicating an empty battery and 100 a
+		 * full battery.
+		 */
+		uint8_t level();
+		uint8_t level(uint16_t voltage);
+
+		/**
+		 * Returns the current battery voltage in millivolts.
+		 */
+		uint16_t voltage();
+
+	private:
+		uint16_t refVoltage;
+		uint16_t minVoltage;
+		uint16_t maxVoltage;
+		float dividerRatio;
+		uint8_t sensePin;
+		uint8_t activationPin;
+		uint8_t activationMode;
+		mapFn_t mapFunction;
+};
+
+//
+// Plots of the functions below available at
+// https://www.desmos.com/calculator/x0esk5bsrk
+//
+
+/**
+ * Symmetric sigmoidal approximation
+ * https://www.desmos.com/calculator/7m9lu26vpy
+ *
+ * c - c / (1 + k*x/v)^3
+ */
+static inline uint8_t sigmoidal(uint16_t voltage, uint16_t minVoltage, uint16_t maxVoltage) {
+	// slow
+	// uint8_t result = 110 - (110 / (1 + pow(1.468 * (voltage - minVoltage)/(maxVoltage - minVoltage), 6)));
+
+	// steep
+	// uint8_t result = 102 - (102 / (1 + pow(1.621 * (voltage - minVoltage)/(maxVoltage - minVoltage), 8.1)));
+
+	// normal
+	uint8_t result = 105 - (105 / (1 + pow(1.724 * (voltage - minVoltage)/(maxVoltage - minVoltage), 5.5)));
+	return result >= 100 ? 100 : result;
+}
+
+/**
+ * Asymmetric sigmoidal approximation
+ * https://www.desmos.com/calculator/oyhpsu8jnw
+ *
+ * c - c / [1 + (k*x/v)^4.5]^3
+ */
+static inline uint8_t asigmoidal(uint16_t voltage, uint16_t minVoltage, uint16_t maxVoltage) {
+	uint8_t result = 101 - (101 / pow(1 + pow(1.33 * (voltage - minVoltage)/(maxVoltage - minVoltage) ,4.5), 3));
+	return result >= 100 ? 100 : result;
+}
+
+/**
+ * Linear mapping
+ * https://www.desmos.com/calculator/sowyhttjta
+ *
+ * x * 100 / v
+ */
+static inline uint8_t linear(uint16_t voltage, uint16_t minVoltage, uint16_t maxVoltage) {
+	return (unsigned long)(voltage - minVoltage) * 100 / (maxVoltage - minVoltage);
+}
+#endif // BATTERY_H_

manufacturing/BOM_led_truck_v1_2020-09-27.csv

@@ -1,36 +0,0 @@
-ID;Name;Designator;place;Footprint;Quantity;Manufacturer Part;Manufacturer;Supplier;Supplier Part;
-1;20k;R1,R2;y;R_0402;2;RC0402FR-0720KL;;;;
-2;1K;R4,R7,R19,R8;y;R_0402;3;RC0402FR-7W1KL;;;;
-3;1M;R6;n;R_0402;1;RC0402FR-7W1ML;;;;
-4;0E;R3,R11;y;R_0402;2;AC0402JR-7D0RL;;;;
-10;10K;R18,R17,R10,R5;y;R_0402;3;RC0402FR-7W10KL;yageo;mouser;603-RC0402FR-7W10KL;
-11;470E;R9;y;R_0402;1;RCC0402470RFKED;vishay;mouser;71-RCC0402470RFKED;
-14;4.3p;C1,C2;y;C_0402;2;CC402CRNPO9BN4R3;yageo;mouser;603-CC402CRNPO9BN4R3;
-15;0.1u;C4,C5;y;C_0402;2;CC402KRX7R6BB104;yageo;mouser;603-CC402KRX7R6BB104;
-16;1u/10v;C6;y;C_0402;1;C0402C105K9PAC;kemet;mouser;80-C0402C105K9PAC;
-26;2.2u/10v;C8,C7,C9,C10;y;C_0805;4;LMK105BJ225KV-F;taiyo yuden;;963-LMK105BJ225KV-F;
-27;4.7u;C3;y;C_0805;1;CL05A475KQ5NRNC;samsung;mouser;187-CL05A475KQ5NRNC;
-17;2.2uH;L1;y;C_0805;1;ELG-TEA2R2NA;panasonic;mouser;667-ELG-TEA2R2NA;
-18;Jack_3.5_mini_5_pol;J1,J2,J3;Y;JACK 3.5 SHOGYO CORP;3;PS000059;multicomp;farnell;2900726;
-20;ZX62D-B-5PA8;J4;y;HIROSE_ZX62D-B-5PA8;1;ZX62D-B-5PA8(30);hirose;mouser;798-ZX62D-B-5PA830;
-21;LM3671MFX-3.3/NOPB;U3;y;SOT-23-5;1;LM3671MFX-1.2/NOPB;TI;LCSC;C130903;
-22;LED-Red(0603);D1;y;LED0603-FD;1;KT-0603R;lite-on;mouser;LTST-C191KRKT;
-24;LED-Blue(0603);D2;y;LED0603-FD;1;19-217/BHC-ZL1M2RY/3T;EVERLIGHT;mouser;LTST-C194TBKT;
-28;LED-0603_G;D3;y;LED0603-FD;1;19-217/GHC-YR1S2/3T;lite-on;mouser;LTST-C190KGKT;
-25;32.768KHz;X1;y;OSC-SMD_L3.2-W1.5;1;NX3215SA 32.768KHZ 12.5PF 20PPM;NDK;mouser;344-NX3215SA32768K8;
-29;MCP73832T-3ACI/OT;U2;y;SOT-23-5;1;MCP73832T-3ACI/OT;MICROCHIP;mouser;579-MCP73832T-3ACIOT;
-30;KSS241GLFS;SW1;y;KEY-SMD_KSS-2G;1;KSS241GLFS;C&K;mouser;611-KSS241GLFS;
-31;STM32L011F4P6;U4;y;TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL;1;STM32L011F4P6;STMicroelectronics;mouser;511-STM32L011F4P6;
-6;BSS84-7-F;Q2;y;SOT-23(SOT-23-3);1;BSS84-7-F;DIODES;LCSC;C85202;
-7;2n3904;Q3;y;SOT-23_1;1;MMBT3904,215;nexpoeria;;;
-33;HDR-F-2.54_1x4;H2;n;;;;;;;
-5;HDR-F-2.54_1x2;H1;n;;;;;;;
-23;HDR-F-2.54_1x3;H3;n;;;;;;;
-32;SOLDERJUMPER_2WAYPASTE23;BOOT0;n;;;;;;;
-;;;;;;;;;;
-;;;;;;;;;;
-;;;;;;;;;;comp
-;;;;;1;;;;;PCB
-;;;;;;;;;;montage
-;;;;;;;;;;total
-;;;;;;;;;;prijs/st

manufacturing/CAD/ledTruck/MySymbols.pretty/3,5mm_straight_circular.kicad_mod

@@ -1,15 +0,0 @@
-(module 3,5mm_straight_circular (layer F.Cu) (tedit 6027E55C)
-  (fp_text reference REF** (at 0 -4) (layer F.SilkS)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_text value 3,5mm_straight_circular (at 0 3) (layer F.Fab)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_circle (center 0 0) (end 8 0) (layer F.SilkS) (width 0.15))
-  (pad 1 thru_hole oval (at 0 -2.5) (size 3.2 1.4) (drill oval 2.6 0.8) (layers *.Cu *.Mask)
-    (die_length 1))
-  (pad 2 thru_hole oval (at -2.5 0 90) (size 3.2 1.4) (drill oval 2.6 0.8) (layers *.Cu *.Mask)
-    (die_length 1))
-  (pad 3 thru_hole oval (at 2.5 0 90) (size 3.2 1.4) (drill oval 2.6 0.8) (layers *.Cu *.Mask)
-    (die_length 1))
-)

manufacturing/CAD/ledTruck/MySymbols.pretty/428-202569-MG01.kicad_mod

@@ -1,14 +0,0 @@
-(module 428-202569-MG01 (layer F.Cu) (tedit 602ED7AC)
-  (fp_text reference REF** (at -0.5 2.5) (layer F.SilkS)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_text value 428-202569-MG01 (at 0 4.5) (layer F.Fab)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_line (start 2 -1) (end 2 1) (layer F.SilkS) (width 0.12))
-  (fp_line (start 2 1) (end -2 1) (layer F.SilkS) (width 0.12))
-  (fp_line (start -2 1) (end -2 -1) (layer F.SilkS) (width 0.12))
-  (fp_line (start -2 -1) (end 2 -1) (layer F.SilkS) (width 0.12))
-  (pad 1 smd rect (at -1.25 0) (size 1 1.8) (layers F.Cu F.Paste F.Mask))
-  (pad 2 smd rect (at 1.25 0) (size 1 1.8) (layers F.Cu F.Paste F.Mask))
-)

manufacturing/CAD/ledTruck/MySymbols.pretty/TestPoint_SMD_R.kicad_mod

@@ -1,9 +0,0 @@
-(module TestPoint_SMD_R (layer F.Cu) (tedit 602EC615)
-  (fp_text reference REF** (at -3.5 -2.5) (layer F.SilkS)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_text value TestPoint_SMD_R (at 0 -0.5) (layer F.Fab)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (pad 1 smd circle (at 0 -2.5) (size 1 1) (layers F.Cu F.Paste F.Mask))
-)

manufacturing/CAD/ledTruck/MySymbols.pretty/USB_Micro_B_Female.kicad_mod

@@ -1,43 +0,0 @@
-(module USB_Micro_B_Female (layer F.Cu) (tedit 602ED58C)
-  (descr https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10103594.pdf)
-  (attr smd)
-  (fp_text reference J2 (at 0 -5.13 180) (layer F.SilkS)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_text value USB_B_Micro (at 0 2.79 180) (layer F.Fab)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_line (start 4.68 1.75) (end 4.68 -4.22) (layer F.CrtYd) (width 0.05))
-  (fp_line (start -4.68 -4.22) (end 4.68 -4.22) (layer F.CrtYd) (width 0.05))
-  (fp_line (start -4.68 1.75) (end 4.68 1.75) (layer F.CrtYd) (width 0.05))
-  (fp_line (start -4.68 1.75) (end -4.68 -4.22) (layer F.CrtYd) (width 0.05))
-  (fp_line (start -1.6 -3.6) (end -1.6 -2) (layer F.SilkS) (width 0.1))
-  (fp_line (start 0 -4.1) (end 0.3 -4.1) (layer F.SilkS) (width 0.1))
-  (fp_line (start 0 -4.1) (end -0.3 -4.1) (layer F.SilkS) (width 0.1))
-  (fp_line (start 3.9 1.4) (end 3.9 1.1) (layer F.SilkS) (width 0.1))
-  (fp_line (start 3.9 1.4) (end 3.6 1.4) (layer F.SilkS) (width 0.1))
-  (fp_line (start -3.9 1.4) (end -3.9 1.1) (layer F.SilkS) (width 0.1))
-  (fp_line (start -3.9 1.4) (end -3.6 1.4) (layer F.SilkS) (width 0.1))
-  (fp_line (start -3.9 -4.1) (end -3.6 -4.1) (layer F.SilkS) (width 0.1))
-  (fp_line (start -3.9 -4.1) (end -3.9 -3.8) (layer F.SilkS) (width 0.1))
-  (fp_line (start 3.9 -4.1) (end 3.6 -4.1) (layer F.SilkS) (width 0.1))
-  (fp_line (start 3.9 -4.1) (end 3.9 -3.8) (layer F.SilkS) (width 0.1))
-  (fp_line (start -3.75 1.29) (end 3.75 1.29) (layer F.Fab) (width 0.1))
-  (fp_line (start 3.75 -3.97) (end 3.75 1.29) (layer F.Fab) (width 0.1))
-  (fp_line (start -3.75 -3.97) (end 3.75 -3.97) (layer F.Fab) (width 0.1))
-  (fp_line (start -3.75 -3.97) (end -3.75 1.29) (layer F.Fab) (width 0.1))
-  (fp_line (start 3.75 2.15) (end -3.75 2.15) (layer F.SilkS) (width 0.12))
-  (pad SH smd rect (at -1.5 1.15) (size 1 1) (layers F.Cu F.Paste F.Mask))
-  (pad 1 smd rect (at -1.3 -3.16) (size 0.4 2.15) (layers F.Cu F.Paste F.Mask))
-  (pad SH thru_hole rect (at -3.6 -3.16) (size 2 1.8) (drill oval 0.7 1.3 (offset -0.2 0)) (layers *.Cu *.Mask))
-  (pad SH thru_hole oval (at -3.6 0) (size 1.3 2.15) (drill oval 0.7 1.3) (layers *.Cu *.Mask))
-  (pad SH thru_hole rect (at 3.6 -3.16 180) (size 2 1.8) (drill oval 0.7 1.3 (offset -0.2 0)) (layers *.Cu *.Mask))
-  (pad SH thru_hole oval (at 3.6 0) (size 1.3 2.15) (drill oval 0.7 1.3) (layers *.Cu *.Mask))
-  (pad "" np_thru_hole circle (at -2 -2.15) (size 0.6 0.6) (drill 0.6) (layers *.Cu *.Mask))
-  (pad "" np_thru_hole circle (at 2 -2.15) (size 0.6 0.6) (drill 0.6) (layers *.Cu *.Mask))
-  (pad SH smd rect (at 1.5 1.15) (size 1 1) (layers F.Cu F.Paste F.Mask))
-  (pad 2 smd rect (at -0.65 -3.16) (size 0.4 2.15) (layers F.Cu F.Paste F.Mask))
-  (pad 3 smd rect (at 0 -3.16) (size 0.4 2.15) (layers F.Cu F.Paste F.Mask))
-  (pad 4 smd rect (at 0.65 -3.16) (size 0.4 2.15) (layers F.Cu F.Paste F.Mask))
-  (pad 5 smd rect (at 1.3 -3.16) (size 0.4 2.15) (layers F.Cu F.Paste F.Mask))
-)

manufacturing/CAD/ledTruck/MySymbols.pretty/slids_switch_spdt.kicad_mod

@@ -1,20 +0,0 @@
-(module slids_switch_spdt (layer F.Cu) (tedit 6027F33B)
-  (fp_text reference REF** (at 0.5 -3.5) (layer F.SilkS)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_text value slids_switch_spdt (at 0.5 3.5) (layer F.Fab)
-    (effects (font (size 1 1) (thickness 0.15)))
-  )
-  (fp_line (start -6.5 -2.85) (end -6.5 2.85) (layer F.SilkS) (width 0.12))
-  (fp_line (start -6.5 2.85) (end 6.5 2.85) (layer F.SilkS) (width 0.12))
-  (fp_line (start 6.5 -2.85) (end 6.5 2.85) (layer F.SilkS) (width 0.12))
-  (fp_line (start 6.5 -2.85) (end -6.5 -2.85) (layer F.SilkS) (width 0.12))
-  (fp_line (start -3 2.85) (end -3 6.85) (layer F.SilkS) (width 0.12))
-  (fp_line (start -3 6.85) (end 0 6.85) (layer F.SilkS) (width 0.12))
-  (fp_line (start 0 2.85) (end 0 6.85) (layer F.SilkS) (width 0.12))
-  (pad 1 thru_hole circle (at -3 0) (size 1.4 1.4) (drill 0.85) (layers *.Cu *.Mask))
-  (pad 2 thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.85) (layers *.Cu *.Mask))
-  (pad 3 thru_hole circle (at 3 0) (size 1.4 1.4) (drill 0.85) (layers *.Cu *.Mask))
-  (pad 4 thru_hole oval (at -6.3 0) (size 0.8 1.8) (drill oval 0.4 1.4) (layers *.Cu *.Mask))
-  (pad 5 thru_hole oval (at 6.3 0) (size 0.8 1.8) (drill oval 0.4 1.4) (layers *.Cu *.Mask))
-)

manufacturing/CAD/ledTruck/farnell.csv

@@ -0,0 +1,5 @@
+9473475;150
+9491902;100
+2911026;150
+4480181;150
+1003213;50

manufacturing/CAD/ledTruck/fp-info-cache

@@ -1,8 +1,15 @@
-8067501134943
+24274158777943
 MySymbols
 3,5mm_straight_circular
 
 
+0
+3
+3
+MySymbols
+3,5mm_straight_square
+
+
 0
 3
 3
@@ -14,6 +21,55 @@ MySymbols
 2
 2
 MySymbols
+BKA30D-R05
+
+
+0
+8
+8
+MySymbols
+OLED_I2C_128x32
+
+
+0
+4
+4
+MySymbols
+RS5808_PRO_OSD_CASTELATED
+
+
+0
+10
+10
+MySymbols
+RX5808
+
+
+0
+14
+13
+MySymbols
+R_1206_3216Metric_REVERSED
+Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+MySymbols
+SOP65P637X110-28N
+
+
+0
+29
+29
+MySymbols
+SWD_Programming_pads
+Through hole straight pin header, 1x04, 2.54mm pitch, single row
+Through hole pin header THT 1x04 2.54mm single row
+0
+4
+4
+MySymbols
 TestPoint_SMD_R
 
 
@@ -21,6 +77,13 @@ TestPoint_SMD_R
 1
 1
 MySymbols
+Toggle_Switch_100SP1T1B4M2QE
+http://spec_sheets.e-switch.com/specs/T111597.pdf
+
+0
+3
+3
+MySymbols
 USB_Micro_B_Female
 https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10103594.pdf
 
@@ -28,9 +91,16 @@ https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10103594.pdf
 11
 6
 MySymbols
+X40_Stepper
+
+
+0
+8
+8
+MySymbols
 slids_switch_spdt
 
 
 0
 5
-5
+4

manufacturing/CAD/ledTruck/gerber/ledTruck-B_Mask.gbr

@@ -1,137 +0,0 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*%
-%TF.CreationDate,2021-02-18T22:12:25+01:00*%
-%TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,rev?*%
-%TF.SameCoordinates,Original*%
-%TF.FileFunction,Soldermask,Bot*%
-%TF.FilePolarity,Negative*%
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-02-18 22:12:25*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-%ADD10C,0.600000*%
-%ADD11O,2.150000X1.300000*%
-%ADD12R,1.800000X2.000000*%
-%ADD13C,2.850000*%
-%ADD14R,2.850000X2.850000*%
-%ADD15C,2.020000*%
-%ADD16O,1.700000X2.000000*%
-%ADD17O,3.200000X1.400000*%
-%ADD18O,1.400000X3.200000*%
-%ADD19C,0.400000*%
-%ADD20C,1.400000*%
-%ADD21O,1.800000X0.800000*%
-G04 APERTURE END LIST*
-D10*
-%TO.C,J2*%
-X111116000Y-98012000D03*
-X111116000Y-94012000D03*
-D11*
-X108966000Y-99612000D03*
-D12*
-X112126000Y-99812000D03*
-D11*
-X108966000Y-92412000D03*
-D12*
-X112126000Y-92212000D03*
-%TD*%
-D13*
-%TO.C,SW3*%
-X170034000Y-76612000D03*
-X170034000Y-81312000D03*
-D14*
-X170034000Y-86012000D03*
-%TD*%
-D13*
-%TO.C,SW2*%
-X145034000Y-76612000D03*
-X145034000Y-81312000D03*
-D14*
-X145034000Y-86012000D03*
-%TD*%
-D13*
-%TO.C,SW1*%
-X120034000Y-76612000D03*
-X120034000Y-81312000D03*
-D14*
-X120034000Y-86012000D03*
-%TD*%
-D15*
-%TO.C,J3*%
-X180594000Y-91186000D03*
-X180594000Y-93726000D03*
-X180594000Y-96266000D03*
-X180594000Y-98806000D03*
-%TD*%
-D16*
-%TO.C,J1*%
-X180034000Y-78012000D03*
-G36*
-G01*
-X176684000Y-78762000D02*
-X176684000Y-77262000D01*
-G75*
-G02*
-X176934000Y-77012000I250000J0D01*
-G01*
-X178134000Y-77012000D01*
-G75*
-G02*
-X178384000Y-77262000I0J-250000D01*
-G01*
-X178384000Y-78762000D01*
-G75*
-G02*
-X178134000Y-79012000I-250000J0D01*
-G01*
-X176934000Y-79012000D01*
-G75*
-G02*
-X176684000Y-78762000I0J250000D01*
-G01*
-G37*
-%TD*%
-D17*
-%TO.C,CON1*%
-X120034000Y-107012000D03*
-D18*
-X117534000Y-109512000D03*
-X122534000Y-109512000D03*
-%TD*%
-D17*
-%TO.C,CON2*%
-X145034000Y-107012000D03*
-D18*
-X142534000Y-109512000D03*
-X147534000Y-109512000D03*
-%TD*%
-%TO.C,CON3*%
-X172534000Y-109512000D03*
-X167534000Y-109512000D03*
-D17*
-X170034000Y-107012000D03*
-%TD*%
-D19*
-%TO.C,U1*%
-X153190000Y-85962000D03*
-X153190000Y-84962000D03*
-X153190000Y-83962000D03*
-X154190000Y-85962000D03*
-X154190000Y-84962000D03*
-X154190000Y-83962000D03*
-X155190000Y-85962000D03*
-X155190000Y-84962000D03*
-X155190000Y-83962000D03*
-%TD*%
-D20*
-%TO.C,S1*%
-X111034000Y-79512000D03*
-X111034000Y-82512000D03*
-X111034000Y-85512000D03*
-D21*
-X111034000Y-76212000D03*
-X111034000Y-88812000D03*
-%TD*%
-M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-B_Mask.gbs

@@ -0,0 +1,135 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*
+G04 #@! TF.CreationDate,2021-04-21T20:11:12+02:00*
+G04 #@! TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,1.1*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Soldermask,Bot*
+G04 #@! TF.FilePolarity,Negative*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-04-21 20:11:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10O,1.700000X1.700000*%
+%ADD11R,1.700000X1.700000*%
+%ADD12O,4.500000X2.500000*%
+%ADD13O,2.500000X4.000000*%
+%ADD14O,4.000000X2.500000*%
+%ADD15C,1.000000*%
+%ADD16C,2.100000*%
+%ADD17C,1.750000*%
+%ADD18R,1.500000X1.000000*%
+%ADD19O,1.200000X1.750000*%
+%ADD20C,0.400000*%
+%ADD21R,1.800000X2.000000*%
+%ADD22O,2.150000X1.300000*%
+%ADD23C,0.550000*%
+%ADD24R,3.200000X2.300000*%
+%ADD25C,3.200000*%
+G04 APERTURE END LIST*
+D10*
+X76586160Y-18671460D03*
+X76586160Y-21211460D03*
+X76586160Y-23751460D03*
+D11*
+X76586160Y-26291460D03*
+D12*
+X65000000Y-33200000D03*
+D13*
+X68550000Y-36400000D03*
+D14*
+X65000000Y-41300000D03*
+D12*
+X40000000Y-33200000D03*
+D13*
+X43550000Y-36400000D03*
+D14*
+X40000000Y-41300000D03*
+D12*
+X15000000Y-33200000D03*
+D13*
+X18550000Y-36400000D03*
+D14*
+X15000000Y-41300000D03*
+D15*
+X59385200Y-5232400D03*
+X21056600Y-2286000D03*
+X32512000Y-32131000D03*
+X28702000Y-32131000D03*
+X25146000Y-32131000D03*
+X52197000Y-6985000D03*
+X59232800Y-17322800D03*
+D16*
+X5490000Y-13250000D03*
+D17*
+X3000000Y-12000000D03*
+X3000000Y-7500000D03*
+D16*
+X5490000Y-6240000D03*
+D18*
+X57653000Y-3912000D03*
+X57653000Y-5212000D03*
+D19*
+X76544000Y-6228000D03*
+G36*
+G01*
+X73944000Y-6853001D02*
+X73944000Y-5602999D01*
+G75*
+G02*
+X74193999Y-5353000I249999J0D01*
+G01*
+X74894001Y-5353000D01*
+G75*
+G02*
+X75144000Y-5602999I0J-249999D01*
+G01*
+X75144000Y-6853001D01*
+G75*
+G02*
+X74894001Y-7103000I-249999J0D01*
+G01*
+X74193999Y-7103000D01*
+G75*
+G02*
+X73944000Y-6853001I0J249999D01*
+G01*
+G37*
+D20*
+X50156000Y-11450000D03*
+X50156000Y-12450000D03*
+X50156000Y-13450000D03*
+X49156000Y-11450000D03*
+X49156000Y-12450000D03*
+X49156000Y-13450000D03*
+X48156000Y-11450000D03*
+X48156000Y-12450000D03*
+X48156000Y-13450000D03*
+D21*
+X5047300Y-19692380D03*
+D22*
+X1887300Y-19892380D03*
+D21*
+X5047300Y-27292380D03*
+D22*
+X1887300Y-27092380D03*
+D23*
+X4037300Y-21492380D03*
+X4037300Y-25492380D03*
+D24*
+X15000000Y-13500000D03*
+D25*
+X15000000Y-8800000D03*
+X15000000Y-4100000D03*
+D24*
+X40000000Y-13500000D03*
+D25*
+X40000000Y-8800000D03*
+X40000000Y-4100000D03*
+D24*
+X65000000Y-13500000D03*
+D25*
+X65000000Y-8800000D03*
+X65000000Y-4100000D03*
+M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-B_Paste.gbp

@@ -0,0 +1,24 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*
+G04 #@! TF.CreationDate,2021-04-21T20:11:12+02:00*
+G04 #@! TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,1.1*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Paste,Bot*
+G04 #@! TF.FilePolarity,Positive*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-04-21 20:11:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,1.000000*%
+G04 APERTURE END LIST*
+D10*
+X59385200Y-5232400D03*
+X21056600Y-2286000D03*
+X32512000Y-32131000D03*
+X28702000Y-32131000D03*
+X25146000Y-32131000D03*
+X52197000Y-6985000D03*
+X59232800Y-17322800D03*
+M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-B_Paste.gbr

@@ -1,15 +0,0 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*%
-%TF.CreationDate,2021-02-18T22:12:25+01:00*%
-%TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,rev?*%
-%TF.SameCoordinates,Original*%
-%TF.FileFunction,Paste,Bot*%
-%TF.FilePolarity,Positive*%
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-02-18 22:12:25*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-B_SilkS.gbo

@@ -0,0 +1,461 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*
+G04 #@! TF.CreationDate,2021-04-21T20:11:12+02:00*
+G04 #@! TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,1.1*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Legend,Bot*
+G04 #@! TF.FilePolarity,Positive*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-04-21 20:11:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,0.120000*%
+%ADD11C,0.150000*%
+%ADD12O,1.700000X1.700000*%
+%ADD13R,1.700000X1.700000*%
+%ADD14O,4.500000X2.500000*%
+%ADD15O,2.500000X4.000000*%
+%ADD16O,4.000000X2.500000*%
+%ADD17C,1.000000*%
+%ADD18C,2.100000*%
+%ADD19C,1.750000*%
+%ADD20R,1.500000X1.000000*%
+%ADD21O,1.200000X1.750000*%
+%ADD22C,0.400000*%
+%ADD23R,1.800000X2.000000*%
+%ADD24O,2.150000X1.300000*%
+%ADD25C,0.550000*%
+%ADD26R,3.200000X2.300000*%
+%ADD27C,3.200000*%
+G04 APERTURE END LIST*
+D10*
+X60092307Y-5232400D02*
+G75*
+G03*
+X60092307Y-5232400I-707107J0D01*
+G01*
+X21763707Y-2286000D02*
+G75*
+G03*
+X21763707Y-2286000I-707107J0D01*
+G01*
+X33219107Y-32131000D02*
+G75*
+G03*
+X33219107Y-32131000I-707107J0D01*
+G01*
+X29409107Y-32131000D02*
+G75*
+G03*
+X29409107Y-32131000I-707107J0D01*
+G01*
+X25853107Y-32131000D02*
+G75*
+G03*
+X25853107Y-32131000I-707107J0D01*
+G01*
+X52904107Y-6985000D02*
+G75*
+G03*
+X52904107Y-6985000I-707107J0D01*
+G01*
+X59939907Y-17322800D02*
+G75*
+G03*
+X59939907Y-17322800I-707107J0D01*
+G01*
+X58653000Y-3162000D02*
+X56653000Y-3162000D01*
+X58653000Y-5962000D02*
+X58653000Y-3162000D01*
+X56653000Y-5962000D02*
+X58653000Y-5962000D01*
+X56653000Y-3162000D02*
+X56653000Y-5962000D01*
+D11*
+X61764704Y-6157980D02*
+X61193276Y-6157980D01*
+X61478990Y-7157980D02*
+X61478990Y-6157980D01*
+X60859942Y-7157980D02*
+X60859942Y-6157980D01*
+X60478990Y-6157980D01*
+X60383752Y-6205600D01*
+X60336133Y-6253219D01*
+X60288514Y-6348457D01*
+X60288514Y-6491314D01*
+X60336133Y-6586552D01*
+X60383752Y-6634171D01*
+X60478990Y-6681790D01*
+X60859942Y-6681790D01*
+X59383752Y-6157980D02*
+X59859942Y-6157980D01*
+X59907561Y-6634171D01*
+X59859942Y-6586552D01*
+X59764704Y-6538933D01*
+X59526609Y-6538933D01*
+X59431371Y-6586552D01*
+X59383752Y-6634171D01*
+X59336133Y-6729409D01*
+X59336133Y-6967504D01*
+X59383752Y-7062742D01*
+X59431371Y-7110361D01*
+X59526609Y-7157980D01*
+X59764704Y-7157980D01*
+X59859942Y-7110361D01*
+X59907561Y-7062742D01*
+X22293104Y-3236980D02*
+X21721676Y-3236980D01*
+X22007390Y-4236980D02*
+X22007390Y-3236980D01*
+X21388342Y-4236980D02*
+X21388342Y-3236980D01*
+X21007390Y-3236980D01*
+X20912152Y-3284600D01*
+X20864533Y-3332219D01*
+X20816914Y-3427457D01*
+X20816914Y-3570314D01*
+X20864533Y-3665552D01*
+X20912152Y-3713171D01*
+X21007390Y-3760790D01*
+X21388342Y-3760790D01*
+X19959771Y-3570314D02*
+X19959771Y-4236980D01*
+X20197866Y-3189361D02*
+X20435961Y-3903647D01*
+X19816914Y-3903647D01*
+X33773904Y-30186380D02*
+X33202476Y-30186380D01*
+X33488190Y-31186380D02*
+X33488190Y-30186380D01*
+X32869142Y-31186380D02*
+X32869142Y-30186380D01*
+X32488190Y-30186380D01*
+X32392952Y-30234000D01*
+X32345333Y-30281619D01*
+X32297714Y-30376857D01*
+X32297714Y-30519714D01*
+X32345333Y-30614952D01*
+X32392952Y-30662571D01*
+X32488190Y-30710190D01*
+X32869142Y-30710190D01*
+X31964380Y-30186380D02*
+X31345333Y-30186380D01*
+X31678666Y-30567333D01*
+X31535809Y-30567333D01*
+X31440571Y-30614952D01*
+X31392952Y-30662571D01*
+X31345333Y-30757809D01*
+X31345333Y-30995904D01*
+X31392952Y-31091142D01*
+X31440571Y-31138761D01*
+X31535809Y-31186380D01*
+X31821523Y-31186380D01*
+X31916761Y-31138761D01*
+X31964380Y-31091142D01*
+X30090904Y-30186380D02*
+X29519476Y-30186380D01*
+X29805190Y-31186380D02*
+X29805190Y-30186380D01*
+X29186142Y-31186380D02*
+X29186142Y-30186380D01*
+X28805190Y-30186380D01*
+X28709952Y-30234000D01*
+X28662333Y-30281619D01*
+X28614714Y-30376857D01*
+X28614714Y-30519714D01*
+X28662333Y-30614952D01*
+X28709952Y-30662571D01*
+X28805190Y-30710190D01*
+X29186142Y-30710190D01*
+X28233761Y-30281619D02*
+X28186142Y-30234000D01*
+X28090904Y-30186380D01*
+X27852809Y-30186380D01*
+X27757571Y-30234000D01*
+X27709952Y-30281619D01*
+X27662333Y-30376857D01*
+X27662333Y-30472095D01*
+X27709952Y-30614952D01*
+X28281380Y-31186380D01*
+X27662333Y-31186380D01*
+X26407904Y-30186380D02*
+X25836476Y-30186380D01*
+X26122190Y-31186380D02*
+X26122190Y-30186380D01*
+X25503142Y-31186380D02*
+X25503142Y-30186380D01*
+X25122190Y-30186380D01*
+X25026952Y-30234000D01*
+X24979333Y-30281619D01*
+X24931714Y-30376857D01*
+X24931714Y-30519714D01*
+X24979333Y-30614952D01*
+X25026952Y-30662571D01*
+X25122190Y-30710190D01*
+X25503142Y-30710190D01*
+X23979333Y-31186380D02*
+X24550761Y-31186380D01*
+X24265047Y-31186380D02*
+X24265047Y-30186380D01*
+X24360285Y-30329238D01*
+X24455523Y-30424476D01*
+X24550761Y-30472095D01*
+X51061809Y-6294380D02*
+X51395142Y-5818190D01*
+X51633238Y-6294380D02*
+X51633238Y-5294380D01*
+X51252285Y-5294380D01*
+X51157047Y-5342000D01*
+X51109428Y-5389619D01*
+X51061809Y-5484857D01*
+X51061809Y-5627714D01*
+X51109428Y-5722952D01*
+X51157047Y-5770571D01*
+X51252285Y-5818190D01*
+X51633238Y-5818190D01*
+X50680857Y-6246761D02*
+X50538000Y-6294380D01*
+X50299904Y-6294380D01*
+X50204666Y-6246761D01*
+X50157047Y-6199142D01*
+X50109428Y-6103904D01*
+X50109428Y-6008666D01*
+X50157047Y-5913428D01*
+X50204666Y-5865809D01*
+X50299904Y-5818190D01*
+X50490380Y-5770571D01*
+X50585619Y-5722952D01*
+X50633238Y-5675333D01*
+X50680857Y-5580095D01*
+X50680857Y-5484857D01*
+X50633238Y-5389619D01*
+X50585619Y-5342000D01*
+X50490380Y-5294380D01*
+X50252285Y-5294380D01*
+X50109428Y-5342000D01*
+X49823714Y-5294380D02*
+X49252285Y-5294380D01*
+X49538000Y-6294380D02*
+X49538000Y-5294380D01*
+X48395142Y-6294380D02*
+X48966571Y-6294380D01*
+X48680857Y-6294380D02*
+X48680857Y-5294380D01*
+X48776095Y-5437238D01*
+X48871333Y-5532476D01*
+X48966571Y-5580095D01*
+X58150133Y-16235371D02*
+X58007276Y-16282990D01*
+X57959657Y-16330609D01*
+X57912038Y-16425847D01*
+X57912038Y-16568704D01*
+X57959657Y-16663942D01*
+X58007276Y-16711561D01*
+X58102514Y-16759180D01*
+X58483466Y-16759180D01*
+X58483466Y-15759180D01*
+X58150133Y-15759180D01*
+X58054895Y-15806800D01*
+X58007276Y-15854419D01*
+X57959657Y-15949657D01*
+X57959657Y-16044895D01*
+X58007276Y-16140133D01*
+X58054895Y-16187752D01*
+X58150133Y-16235371D01*
+X58483466Y-16235371D01*
+X57292990Y-15759180D02*
+X57102514Y-15759180D01*
+X57007276Y-15806800D01*
+X56912038Y-15902038D01*
+X56864419Y-16092514D01*
+X56864419Y-16425847D01*
+X56912038Y-16616323D01*
+X57007276Y-16711561D01*
+X57102514Y-16759180D01*
+X57292990Y-16759180D01*
+X57388228Y-16711561D01*
+X57483466Y-16616323D01*
+X57531085Y-16425847D01*
+X57531085Y-16092514D01*
+X57483466Y-15902038D01*
+X57388228Y-15806800D01*
+X57292990Y-15759180D01*
+X56245371Y-15759180D02*
+X56054895Y-15759180D01*
+X55959657Y-15806800D01*
+X55864419Y-15902038D01*
+X55816800Y-16092514D01*
+X55816800Y-16425847D01*
+X55864419Y-16616323D01*
+X55959657Y-16711561D01*
+X56054895Y-16759180D01*
+X56245371Y-16759180D01*
+X56340609Y-16711561D01*
+X56435847Y-16616323D01*
+X56483466Y-16425847D01*
+X56483466Y-16092514D01*
+X56435847Y-15902038D01*
+X56340609Y-15806800D01*
+X56245371Y-15759180D01*
+X55531085Y-15759180D02*
+X54959657Y-15759180D01*
+X55245371Y-16759180D02*
+X55245371Y-15759180D01*
+X54435847Y-15759180D02*
+X54340609Y-15759180D01*
+X54245371Y-15806800D01*
+X54197752Y-15854419D01*
+X54150133Y-15949657D01*
+X54102514Y-16140133D01*
+X54102514Y-16378228D01*
+X54150133Y-16568704D01*
+X54197752Y-16663942D01*
+X54245371Y-16711561D01*
+X54340609Y-16759180D01*
+X54435847Y-16759180D01*
+X54531085Y-16711561D01*
+X54578704Y-16663942D01*
+X54626323Y-16568704D01*
+X54673942Y-16378228D01*
+X54673942Y-16140133D01*
+X54626323Y-15949657D01*
+X54578704Y-15854419D01*
+X54531085Y-15806800D01*
+X54435847Y-15759180D01*
+X58440533Y-1738380D02*
+X58440533Y-2452666D01*
+X58488152Y-2595523D01*
+X58583390Y-2690761D01*
+X58726247Y-2738380D01*
+X58821485Y-2738380D01*
+X57964342Y-2738380D02*
+X57964342Y-1738380D01*
+X57583390Y-1738380D01*
+X57488152Y-1786000D01*
+X57440533Y-1833619D01*
+X57392914Y-1928857D01*
+X57392914Y-2071714D01*
+X57440533Y-2166952D01*
+X57488152Y-2214571D01*
+X57583390Y-2262190D01*
+X57964342Y-2262190D01*
+X57011961Y-1833619D02*
+X56964342Y-1786000D01*
+X56869104Y-1738380D01*
+X56631009Y-1738380D01*
+X56535771Y-1786000D01*
+X56488152Y-1833619D01*
+X56440533Y-1928857D01*
+X56440533Y-2024095D01*
+X56488152Y-2166952D01*
+X57059580Y-2738380D01*
+X56440533Y-2738380D01*
+%LPC*%
+D12*
+X76586160Y-18671460D03*
+X76586160Y-21211460D03*
+X76586160Y-23751460D03*
+D13*
+X76586160Y-26291460D03*
+D14*
+X65000000Y-33200000D03*
+D15*
+X68550000Y-36400000D03*
+D16*
+X65000000Y-41300000D03*
+D14*
+X40000000Y-33200000D03*
+D15*
+X43550000Y-36400000D03*
+D16*
+X40000000Y-41300000D03*
+D14*
+X15000000Y-33200000D03*
+D15*
+X18550000Y-36400000D03*
+D16*
+X15000000Y-41300000D03*
+D17*
+X59385200Y-5232400D03*
+X21056600Y-2286000D03*
+X32512000Y-32131000D03*
+X28702000Y-32131000D03*
+X25146000Y-32131000D03*
+X52197000Y-6985000D03*
+X59232800Y-17322800D03*
+D18*
+X5490000Y-13250000D03*
+D19*
+X3000000Y-12000000D03*
+X3000000Y-7500000D03*
+D18*
+X5490000Y-6240000D03*
+D20*
+X57653000Y-3912000D03*
+X57653000Y-5212000D03*
+D21*
+X76544000Y-6228000D03*
+G36*
+G01*
+X73944000Y-6853001D02*
+X73944000Y-5602999D01*
+G75*
+G02*
+X74193999Y-5353000I249999J0D01*
+G01*
+X74894001Y-5353000D01*
+G75*
+G02*
+X75144000Y-5602999I0J-249999D01*
+G01*
+X75144000Y-6853001D01*
+G75*
+G02*
+X74894001Y-7103000I-249999J0D01*
+G01*
+X74193999Y-7103000D01*
+G75*
+G02*
+X73944000Y-6853001I0J249999D01*
+G01*
+G37*
+D22*
+X50156000Y-11450000D03*
+X50156000Y-12450000D03*
+X50156000Y-13450000D03*
+X49156000Y-11450000D03*
+X49156000Y-12450000D03*
+X49156000Y-13450000D03*
+X48156000Y-11450000D03*
+X48156000Y-12450000D03*
+X48156000Y-13450000D03*
+D23*
+X5047300Y-19692380D03*
+D24*
+X1887300Y-19892380D03*
+D23*
+X5047300Y-27292380D03*
+D24*
+X1887300Y-27092380D03*
+D25*
+X4037300Y-21492380D03*
+X4037300Y-25492380D03*
+D26*
+X15000000Y-13500000D03*
+D27*
+X15000000Y-8800000D03*
+X15000000Y-4100000D03*
+D26*
+X40000000Y-13500000D03*
+D27*
+X40000000Y-8800000D03*
+X40000000Y-4100000D03*
+D26*
+X65000000Y-13500000D03*
+D27*
+X65000000Y-8800000D03*
+X65000000Y-4100000D03*
+M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-B_SilkS.gbr

@@ -1,15 +0,0 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*%
-%TF.CreationDate,2021-02-18T22:12:25+01:00*%
-%TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,rev?*%
-%TF.SameCoordinates,Original*%
-%TF.FileFunction,Legend,Bot*%
-%TF.FilePolarity,Positive*%
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-02-18 22:12:25*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-Dwgs_User.gbr

@@ -0,0 +1,578 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*
+G04 #@! TF.CreationDate,2021-04-21T20:11:12+02:00*
+G04 #@! TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,1.1*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,OtherDrawing,Comment*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-04-21 20:11:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,0.150000*%
+%ADD11C,0.120000*%
+%ADD12C,0.100000*%
+G04 APERTURE END LIST*
+D10*
+X80Y80D02*
+X79999920Y80D01*
+X80Y-46997540D02*
+X80Y80D01*
+X79999920Y-46997540D02*
+X80Y-46997540D01*
+X79999920Y-2460D02*
+X79999920Y-46997540D01*
+X-15847476Y-36430142D02*
+X-15895095Y-36477761D01*
+X-16037952Y-36525380D01*
+X-16133190Y-36525380D01*
+X-16276047Y-36477761D01*
+X-16371285Y-36382523D01*
+X-16418904Y-36287285D01*
+X-16466523Y-36096809D01*
+X-16466523Y-35953952D01*
+X-16418904Y-35763476D01*
+X-16371285Y-35668238D01*
+X-16276047Y-35573000D01*
+X-16133190Y-35525380D01*
+X-16037952Y-35525380D01*
+X-15895095Y-35573000D01*
+X-15847476Y-35620619D01*
+X-15418904Y-36525380D02*
+X-15418904Y-35525380D01*
+X-14990333Y-36525380D02*
+X-14990333Y-36001571D01*
+X-15037952Y-35906333D01*
+X-15133190Y-35858714D01*
+X-15276047Y-35858714D01*
+X-15371285Y-35906333D01*
+X-15418904Y-35953952D01*
+X-14085571Y-36525380D02*
+X-14085571Y-36001571D01*
+X-14133190Y-35906333D01*
+X-14228428Y-35858714D01*
+X-14418904Y-35858714D01*
+X-14514142Y-35906333D01*
+X-14085571Y-36477761D02*
+X-14180809Y-36525380D01*
+X-14418904Y-36525380D01*
+X-14514142Y-36477761D01*
+X-14561761Y-36382523D01*
+X-14561761Y-36287285D01*
+X-14514142Y-36192047D01*
+X-14418904Y-36144428D01*
+X-14180809Y-36144428D01*
+X-14085571Y-36096809D01*
+X-13609380Y-36525380D02*
+X-13609380Y-35858714D01*
+X-13609380Y-36049190D02*
+X-13561761Y-35953952D01*
+X-13514142Y-35906333D01*
+X-13418904Y-35858714D01*
+X-13323666Y-35858714D01*
+X-12561761Y-35858714D02*
+X-12561761Y-36668238D01*
+X-12609380Y-36763476D01*
+X-12657000Y-36811095D01*
+X-12752238Y-36858714D01*
+X-12895095Y-36858714D01*
+X-12990333Y-36811095D01*
+X-12561761Y-36477761D02*
+X-12657000Y-36525380D01*
+X-12847476Y-36525380D01*
+X-12942714Y-36477761D01*
+X-12990333Y-36430142D01*
+X-13037952Y-36334904D01*
+X-13037952Y-36049190D01*
+X-12990333Y-35953952D01*
+X-12942714Y-35906333D01*
+X-12847476Y-35858714D01*
+X-12657000Y-35858714D01*
+X-12561761Y-35906333D01*
+X-11704619Y-36477761D02*
+X-11799857Y-36525380D01*
+X-11990333Y-36525380D01*
+X-12085571Y-36477761D01*
+X-12133190Y-36382523D01*
+X-12133190Y-36001571D01*
+X-12085571Y-35906333D01*
+X-11990333Y-35858714D01*
+X-11799857Y-35858714D01*
+X-11704619Y-35906333D01*
+X-11657000Y-36001571D01*
+X-11657000Y-36096809D01*
+X-12133190Y-36192047D01*
+X-10514142Y-36477761D02*
+X-10418904Y-36525380D01*
+X-10228428Y-36525380D01*
+X-10133190Y-36477761D01*
+X-10085571Y-36382523D01*
+X-10085571Y-36334904D01*
+X-10133190Y-36239666D01*
+X-10228428Y-36192047D01*
+X-10371285Y-36192047D01*
+X-10466523Y-36144428D01*
+X-10514142Y-36049190D01*
+X-10514142Y-36001571D01*
+X-10466523Y-35906333D01*
+X-10371285Y-35858714D01*
+X-10228428Y-35858714D01*
+X-10133190Y-35906333D01*
+X-9799857Y-35858714D02*
+X-9418904Y-35858714D01*
+X-9657000Y-35525380D02*
+X-9657000Y-36382523D01*
+X-9609380Y-36477761D01*
+X-9514142Y-36525380D01*
+X-9418904Y-36525380D01*
+X-8657000Y-36525380D02*
+X-8657000Y-36001571D01*
+X-8704619Y-35906333D01*
+X-8799857Y-35858714D01*
+X-8990333Y-35858714D01*
+X-9085571Y-35906333D01*
+X-8657000Y-36477761D02*
+X-8752238Y-36525380D01*
+X-8990333Y-36525380D01*
+X-9085571Y-36477761D01*
+X-9133190Y-36382523D01*
+X-9133190Y-36287285D01*
+X-9085571Y-36192047D01*
+X-8990333Y-36144428D01*
+X-8752238Y-36144428D01*
+X-8657000Y-36096809D01*
+X-8323666Y-35858714D02*
+X-7942714Y-35858714D01*
+X-8180809Y-35525380D02*
+X-8180809Y-36382523D01*
+X-8133190Y-36477761D01*
+X-8037952Y-36525380D01*
+X-7942714Y-36525380D01*
+X-7180809Y-35858714D02*
+X-7180809Y-36525380D01*
+X-7609380Y-35858714D02*
+X-7609380Y-36382523D01*
+X-7561761Y-36477761D01*
+X-7466523Y-36525380D01*
+X-7323666Y-36525380D01*
+X-7228428Y-36477761D01*
+X-7180809Y-36430142D01*
+X-6752238Y-36477761D02*
+X-6657000Y-36525380D01*
+X-6466523Y-36525380D01*
+X-6371285Y-36477761D01*
+X-6323666Y-36382523D01*
+X-6323666Y-36334904D01*
+X-6371285Y-36239666D01*
+X-6466523Y-36192047D01*
+X-6609380Y-36192047D01*
+X-6704619Y-36144428D01*
+X-6752238Y-36049190D01*
+X-6752238Y-36001571D01*
+X-6704619Y-35906333D01*
+X-6609380Y-35858714D01*
+X-6466523Y-35858714D01*
+X-6371285Y-35906333D01*
+X-4657000Y-36525380D02*
+X-5133190Y-36525380D01*
+X-5133190Y-35525380D01*
+X-4323666Y-36001571D02*
+X-3990333Y-36001571D01*
+X-3847476Y-36525380D02*
+X-4323666Y-36525380D01*
+X-4323666Y-35525380D01*
+X-3847476Y-35525380D01*
+X-3418904Y-36525380D02*
+X-3418904Y-35525380D01*
+X-3180809Y-35525380D01*
+X-3037952Y-35573000D01*
+X-2942714Y-35668238D01*
+X-2895095Y-35763476D01*
+X-2847476Y-35953952D01*
+X-2847476Y-36096809D01*
+X-2895095Y-36287285D01*
+X-2942714Y-36382523D01*
+X-3037952Y-36477761D01*
+X-3180809Y-36525380D01*
+X-3418904Y-36525380D01*
+X-14061619Y-31080380D02*
+X-14061619Y-31889904D01*
+X-14014000Y-31985142D01*
+X-13966380Y-32032761D01*
+X-13871142Y-32080380D01*
+X-13680666Y-32080380D01*
+X-13585428Y-32032761D01*
+X-13537809Y-31985142D01*
+X-13490190Y-31889904D01*
+X-13490190Y-31080380D01*
+X-13061619Y-32032761D02*
+X-12918761Y-32080380D01*
+X-12680666Y-32080380D01*
+X-12585428Y-32032761D01*
+X-12537809Y-31985142D01*
+X-12490190Y-31889904D01*
+X-12490190Y-31794666D01*
+X-12537809Y-31699428D01*
+X-12585428Y-31651809D01*
+X-12680666Y-31604190D01*
+X-12871142Y-31556571D01*
+X-12966380Y-31508952D01*
+X-13014000Y-31461333D01*
+X-13061619Y-31366095D01*
+X-13061619Y-31270857D01*
+X-13014000Y-31175619D01*
+X-12966380Y-31128000D01*
+X-12871142Y-31080380D01*
+X-12633047Y-31080380D01*
+X-12490190Y-31128000D01*
+X-11728285Y-31556571D02*
+X-11585428Y-31604190D01*
+X-11537809Y-31651809D01*
+X-11490190Y-31747047D01*
+X-11490190Y-31889904D01*
+X-11537809Y-31985142D01*
+X-11585428Y-32032761D01*
+X-11680666Y-32080380D01*
+X-12061619Y-32080380D01*
+X-12061619Y-31080380D01*
+X-11728285Y-31080380D01*
+X-11633047Y-31128000D01*
+X-11585428Y-31175619D01*
+X-11537809Y-31270857D01*
+X-11537809Y-31366095D01*
+X-11585428Y-31461333D01*
+X-11633047Y-31508952D01*
+X-11728285Y-31556571D01*
+X-12061619Y-31556571D01*
+X-10299714Y-31413714D02*
+X-10299714Y-32413714D01*
+X-10299714Y-31461333D02*
+X-10204476Y-31413714D01*
+X-10014000Y-31413714D01*
+X-9918761Y-31461333D01*
+X-9871142Y-31508952D01*
+X-9823523Y-31604190D01*
+X-9823523Y-31889904D01*
+X-9871142Y-31985142D01*
+X-9918761Y-32032761D01*
+X-10014000Y-32080380D01*
+X-10204476Y-32080380D01*
+X-10299714Y-32032761D01*
+X-9252095Y-32080380D02*
+X-9347333Y-32032761D01*
+X-9394952Y-31985142D01*
+X-9442571Y-31889904D01*
+X-9442571Y-31604190D01*
+X-9394952Y-31508952D01*
+X-9347333Y-31461333D01*
+X-9252095Y-31413714D01*
+X-9109238Y-31413714D01*
+X-9014000Y-31461333D01*
+X-8966380Y-31508952D01*
+X-8918761Y-31604190D01*
+X-8918761Y-31889904D01*
+X-8966380Y-31985142D01*
+X-9014000Y-32032761D01*
+X-9109238Y-32080380D01*
+X-9252095Y-32080380D01*
+X-8585428Y-31413714D02*
+X-8394952Y-32080380D01*
+X-8204476Y-31604190D01*
+X-8014000Y-32080380D01*
+X-7823523Y-31413714D01*
+X-7061619Y-32032761D02*
+X-7156857Y-32080380D01*
+X-7347333Y-32080380D01*
+X-7442571Y-32032761D01*
+X-7490190Y-31937523D01*
+X-7490190Y-31556571D01*
+X-7442571Y-31461333D01*
+X-7347333Y-31413714D01*
+X-7156857Y-31413714D01*
+X-7061619Y-31461333D01*
+X-7014000Y-31556571D01*
+X-7014000Y-31651809D01*
+X-7490190Y-31747047D01*
+X-6585428Y-32080380D02*
+X-6585428Y-31413714D01*
+X-6585428Y-31604190D02*
+X-6537809Y-31508952D01*
+X-6490190Y-31461333D01*
+X-6394952Y-31413714D01*
+X-6299714Y-31413714D01*
+X-4728285Y-32080380D02*
+X-5204476Y-32080380D01*
+X-5204476Y-31080380D01*
+X-4394952Y-31556571D02*
+X-4061619Y-31556571D01*
+X-3918761Y-32080380D02*
+X-4394952Y-32080380D01*
+X-4394952Y-31080380D01*
+X-3918761Y-31080380D01*
+X-3490190Y-32080380D02*
+X-3490190Y-31080380D01*
+X-3252095Y-31080380D01*
+X-3109238Y-31128000D01*
+X-3014000Y-31223238D01*
+X-2966380Y-31318476D01*
+X-2918761Y-31508952D01*
+X-2918761Y-31651809D01*
+X-2966380Y-31842285D01*
+X-3014000Y-31937523D01*
+X-3109238Y-32032761D01*
+X-3252095Y-32080380D01*
+X-3490190Y-32080380D01*
+X-17506285Y-23444380D02*
+X-17506285Y-22444380D01*
+X-17172952Y-23158666D01*
+X-16839619Y-22444380D01*
+X-16839619Y-23444380D01*
+X-16363428Y-23444380D02*
+X-16363428Y-22777714D01*
+X-16363428Y-22444380D02*
+X-16411047Y-22492000D01*
+X-16363428Y-22539619D01*
+X-16315809Y-22492000D01*
+X-16363428Y-22444380D01*
+X-16363428Y-22539619D01*
+X-15458666Y-23396761D02*
+X-15553904Y-23444380D01*
+X-15744380Y-23444380D01*
+X-15839619Y-23396761D01*
+X-15887238Y-23349142D01*
+X-15934857Y-23253904D01*
+X-15934857Y-22968190D01*
+X-15887238Y-22872952D01*
+X-15839619Y-22825333D01*
+X-15744380Y-22777714D01*
+X-15553904Y-22777714D01*
+X-15458666Y-22825333D01*
+X-15030095Y-23444380D02*
+X-15030095Y-22777714D01*
+X-15030095Y-22968190D02*
+X-14982476Y-22872952D01*
+X-14934857Y-22825333D01*
+X-14839619Y-22777714D01*
+X-14744380Y-22777714D01*
+X-14268190Y-23444380D02*
+X-14363428Y-23396761D01*
+X-14411047Y-23349142D01*
+X-14458666Y-23253904D01*
+X-14458666Y-22968190D01*
+X-14411047Y-22872952D01*
+X-14363428Y-22825333D01*
+X-14268190Y-22777714D01*
+X-14125333Y-22777714D01*
+X-14030095Y-22825333D01*
+X-13982476Y-22872952D01*
+X-13934857Y-22968190D01*
+X-13934857Y-23253904D01*
+X-13982476Y-23349142D01*
+X-14030095Y-23396761D01*
+X-14125333Y-23444380D01*
+X-14268190Y-23444380D01*
+X-12744380Y-22444380D02*
+X-12744380Y-23253904D01*
+X-12696761Y-23349142D01*
+X-12649142Y-23396761D01*
+X-12553904Y-23444380D01*
+X-12363428Y-23444380D01*
+X-12268190Y-23396761D01*
+X-12220571Y-23349142D01*
+X-12172952Y-23253904D01*
+X-12172952Y-22444380D01*
+X-11744380Y-23396761D02*
+X-11601523Y-23444380D01*
+X-11363428Y-23444380D01*
+X-11268190Y-23396761D01*
+X-11220571Y-23349142D01*
+X-11172952Y-23253904D01*
+X-11172952Y-23158666D01*
+X-11220571Y-23063428D01*
+X-11268190Y-23015809D01*
+X-11363428Y-22968190D01*
+X-11553904Y-22920571D01*
+X-11649142Y-22872952D01*
+X-11696761Y-22825333D01*
+X-11744380Y-22730095D01*
+X-11744380Y-22634857D01*
+X-11696761Y-22539619D01*
+X-11649142Y-22492000D01*
+X-11553904Y-22444380D01*
+X-11315809Y-22444380D01*
+X-11172952Y-22492000D01*
+X-10411047Y-22920571D02*
+X-10268190Y-22968190D01*
+X-10220571Y-23015809D01*
+X-10172952Y-23111047D01*
+X-10172952Y-23253904D01*
+X-10220571Y-23349142D01*
+X-10268190Y-23396761D01*
+X-10363428Y-23444380D01*
+X-10744380Y-23444380D01*
+X-10744380Y-22444380D01*
+X-10411047Y-22444380D01*
+X-10315809Y-22492000D01*
+X-10268190Y-22539619D01*
+X-10220571Y-22634857D01*
+X-10220571Y-22730095D01*
+X-10268190Y-22825333D01*
+X-10315809Y-22872952D01*
+X-10411047Y-22920571D01*
+X-10744380Y-22920571D01*
+X-8696761Y-23825333D02*
+X-8744380Y-23777714D01*
+X-8839619Y-23634857D01*
+X-8887238Y-23539619D01*
+X-8934857Y-23396761D01*
+X-8982476Y-23158666D01*
+X-8982476Y-22968190D01*
+X-8934857Y-22730095D01*
+X-8887238Y-22587238D01*
+X-8839619Y-22492000D01*
+X-8744380Y-22349142D01*
+X-8696761Y-22301523D01*
+X-7887238Y-23396761D02*
+X-7982476Y-23444380D01*
+X-8172952Y-23444380D01*
+X-8268190Y-23396761D01*
+X-8315809Y-23349142D01*
+X-8363428Y-23253904D01*
+X-8363428Y-22968190D01*
+X-8315809Y-22872952D01*
+X-8268190Y-22825333D01*
+X-8172952Y-22777714D01*
+X-7982476Y-22777714D01*
+X-7887238Y-22825333D01*
+X-7458666Y-23444380D02*
+X-7458666Y-22444380D01*
+X-7030095Y-23444380D02*
+X-7030095Y-22920571D01*
+X-7077714Y-22825333D01*
+X-7172952Y-22777714D01*
+X-7315809Y-22777714D01*
+X-7411047Y-22825333D01*
+X-7458666Y-22872952D01*
+X-6125333Y-23444380D02*
+X-6125333Y-22920571D01*
+X-6172952Y-22825333D01*
+X-6268190Y-22777714D01*
+X-6458666Y-22777714D01*
+X-6553904Y-22825333D01*
+X-6125333Y-23396761D02*
+X-6220571Y-23444380D01*
+X-6458666Y-23444380D01*
+X-6553904Y-23396761D01*
+X-6601523Y-23301523D01*
+X-6601523Y-23206285D01*
+X-6553904Y-23111047D01*
+X-6458666Y-23063428D01*
+X-6220571Y-23063428D01*
+X-6125333Y-23015809D01*
+X-5649142Y-23444380D02*
+X-5649142Y-22777714D01*
+X-5649142Y-22968190D02*
+X-5601523Y-22872952D01*
+X-5553904Y-22825333D01*
+X-5458666Y-22777714D01*
+X-5363428Y-22777714D01*
+X-4601523Y-22777714D02*
+X-4601523Y-23587238D01*
+X-4649142Y-23682476D01*
+X-4696761Y-23730095D01*
+X-4792000Y-23777714D01*
+X-4934857Y-23777714D01*
+X-5030095Y-23730095D01*
+X-4601523Y-23396761D02*
+X-4696761Y-23444380D01*
+X-4887238Y-23444380D01*
+X-4982476Y-23396761D01*
+X-5030095Y-23349142D01*
+X-5077714Y-23253904D01*
+X-5077714Y-22968190D01*
+X-5030095Y-22872952D01*
+X-4982476Y-22825333D01*
+X-4887238Y-22777714D01*
+X-4696761Y-22777714D01*
+X-4601523Y-22825333D01*
+X-3744380Y-23396761D02*
+X-3839619Y-23444380D01*
+X-4030095Y-23444380D01*
+X-4125333Y-23396761D01*
+X-4172952Y-23301523D01*
+X-4172952Y-22920571D01*
+X-4125333Y-22825333D01*
+X-4030095Y-22777714D01*
+X-3839619Y-22777714D01*
+X-3744380Y-22825333D01*
+X-3696761Y-22920571D01*
+X-3696761Y-23015809D01*
+X-4172952Y-23111047D01*
+X-3363428Y-23825333D02*
+X-3315809Y-23777714D01*
+X-3220571Y-23634857D01*
+X-3172952Y-23539619D01*
+X-3125333Y-23396761D01*
+X-3077714Y-23158666D01*
+X-3077714Y-22968190D01*
+X-3125333Y-22730095D01*
+X-3172952Y-22587238D01*
+X-3220571Y-22492000D01*
+X-3315809Y-22349142D01*
+X-3363428Y-22301523D01*
+X-513000Y-36073000D02*
+X4313000Y-36073000D01*
+X-513000Y-31501000D02*
+X4313000Y-31501000D01*
+D11*
+X60800000Y-37000000D02*
+X69200000Y-37000000D01*
+X65000000Y-32800000D02*
+X65000000Y-41200000D01*
+X69200000Y-37000000D02*
+G75*
+G03*
+X69200000Y-37000000I-4200000J0D01*
+G01*
+X35800000Y-37000000D02*
+X44200000Y-37000000D01*
+X40000000Y-32800000D02*
+X40000000Y-41200000D01*
+X44200000Y-37000000D02*
+G75*
+G03*
+X44200000Y-37000000I-4200000J0D01*
+G01*
+X10800000Y-37000000D02*
+X19200000Y-37000000D01*
+X15000000Y-32800000D02*
+X15000000Y-41200000D01*
+X19200000Y-37000000D02*
+G75*
+G03*
+X19200000Y-37000000I-4200000J0D01*
+G01*
+X-612700Y-27992380D02*
+X587300Y-27992380D01*
+X-612700Y-18992380D02*
+X-612700Y-27992380D01*
+X587300Y-18992380D02*
+X-612700Y-18992380D01*
+D12*
+X18400000Y-8800000D02*
+G75*
+G03*
+X18400000Y-8800000I-3400000J0D01*
+G01*
+X43400000Y-8800000D02*
+G75*
+G03*
+X43400000Y-8800000I-3400000J0D01*
+G01*
+X68400000Y-8800000D02*
+G75*
+G03*
+X68400000Y-8800000I-3400000J0D01*
+G01*
+M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-Edge_Cuts.gbr

@@ -1,26 +0,0 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*%
-%TF.CreationDate,2021-02-18T22:12:25+01:00*%
-%TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,rev?*%
-%TF.SameCoordinates,Original*%
-%TF.FileFunction,Profile,NP*%
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-02-18 22:12:25*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-%TA.AperFunction,Profile*%
-%ADD10C,0.050000*%
-%TD*%
-G04 APERTURE END LIST*
-D10*
-X107034000Y-118012000D02*
-X107034000Y-74012000D01*
-X107034000Y-118012000D02*
-X183034000Y-118012000D01*
-X183034000Y-74012000D02*
-X183034000Y-118012000D01*
-X107034000Y-74012000D02*
-X183034000Y-74012000D01*
-M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-Edge_Cuts.gm1

@@ -0,0 +1,26 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*
+G04 #@! TF.CreationDate,2021-04-21T20:11:12+02:00*
+G04 #@! TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,1.1*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Profile,NP*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-04-21 20:11:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 #@! TA.AperFunction,Profile*
+%ADD10C,0.050000*%
+G04 #@! TD*
+G04 APERTURE END LIST*
+D10*
+X0Y-47000000D02*
+X0Y0D01*
+X0Y-47000000D02*
+X80000000Y-47000000D01*
+X80000000Y0D02*
+X80000000Y-47000000D01*
+X0Y0D02*
+X80000000Y0D01*
+M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-F_Paste.gbr

@@ -1,221 +0,0 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,(5.1.9-0-10_14)*%
-%TF.CreationDate,2021-02-18T22:12:25+01:00*%
-%TF.ProjectId,ledTruck,6c656454-7275-4636-9b2e-6b696361645f,rev?*%
-%TF.SameCoordinates,Original*%
-%TF.FileFunction,Paste,Top*%
-%TF.FilePolarity,Positive*%
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.9-0-10_14)) date 2021-02-18 22:12:25*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-%ADD10R,1.800000X1.000000*%
-%ADD11R,2.150000X0.400000*%
-%ADD12R,1.000000X1.000000*%
-%ADD13C,1.000000*%
-%ADD14R,1.200000X1.200000*%
-%ADD15R,0.600000X1.050000*%
-%ADD16R,0.600000X0.800000*%
-%ADD17R,0.800000X0.600000*%
-%ADD18R,0.280000X0.850000*%
-%ADD19R,0.850000X0.280000*%
-%ADD20R,3.450000X3.450000*%
-G04 APERTURE END LIST*
-D10*
-%TO.C,Y1*%
-X161544000Y-83078000D03*
-X161544000Y-85578000D03*
-%TD*%
-D11*
-%TO.C,J2*%
-X112126000Y-97312000D03*
-X112126000Y-96662000D03*
-X112126000Y-96012000D03*
-X112126000Y-95362000D03*
-D12*
-X107816000Y-97512000D03*
-D11*
-X112126000Y-94712000D03*
-D12*
-X107816000Y-94512000D03*
-%TD*%
-D13*
-%TO.C,BOOT0*%
-X156718000Y-89194000D03*
-%TD*%
-%TO.C,RST1*%
-X155956000Y-77470000D03*
-%TD*%
-D14*
-%TO.C,C9*%
-X126204000Y-87122000D03*
-X128304000Y-87122000D03*
-%TD*%
-%TO.C,C7*%
-X134586000Y-83566000D03*
-X136686000Y-83566000D03*
-%TD*%
-%TO.C,C4*%
-X126204000Y-83566000D03*
-X128304000Y-83566000D03*
-%TD*%
-%TO.C,C1*%
-X134586000Y-87122000D03*
-X136686000Y-87122000D03*
-%TD*%
-D15*
-%TO.C,U2*%
-X135316000Y-75358000D03*
-X134366000Y-75358000D03*
-X133416000Y-75358000D03*
-X133416000Y-78058000D03*
-X135316000Y-78058000D03*
-%TD*%
-D16*
-%TO.C,R13*%
-X160844000Y-78486000D03*
-X162244000Y-78486000D03*
-%TD*%
-%TO.C,R12*%
-X160844000Y-76962000D03*
-X162244000Y-76962000D03*
-%TD*%
-%TO.C,R11*%
-X108834000Y-114012000D03*
-X110234000Y-114012000D03*
-%TD*%
-%TO.C,R10*%
-X108834000Y-115512000D03*
-X110234000Y-115512000D03*
-%TD*%
-%TO.C,R9*%
-X151446000Y-80010000D03*
-X152846000Y-80010000D03*
-%TD*%
-D17*
-%TO.C,R8*%
-X163830000Y-84774000D03*
-X163830000Y-83374000D03*
-%TD*%
-D16*
-%TO.C,R7*%
-X137222000Y-78232000D03*
-X138622000Y-78232000D03*
-%TD*%
-%TO.C,R6*%
-X157672000Y-109728000D03*
-X156272000Y-109728000D03*
-%TD*%
-%TO.C,R5*%
-X156272000Y-106426000D03*
-X157672000Y-106426000D03*
-%TD*%
-%TO.C,R4*%
-X132142000Y-113284000D03*
-X133542000Y-113284000D03*
-%TD*%
-%TO.C,R3*%
-X157672000Y-108204000D03*
-X156272000Y-108204000D03*
-%TD*%
-%TO.C,R2*%
-X157672000Y-104902000D03*
-X156272000Y-104902000D03*
-%TD*%
-%TO.C,R1*%
-X132128000Y-111760000D03*
-X133528000Y-111760000D03*
-%TD*%
-D14*
-%TO.C,L1*%
-X128338000Y-80264000D03*
-X126238000Y-80264000D03*
-%TD*%
-%TO.C,D2*%
-X109034000Y-107462000D03*
-X109034000Y-109562000D03*
-%TD*%
-%TO.C,D1*%
-X109034000Y-102912000D03*
-X109034000Y-105012000D03*
-%TD*%
-D16*
-%TO.C,C8*%
-X152846000Y-78486000D03*
-X151446000Y-78486000D03*
-%TD*%
-%TO.C,C6*%
-X152846000Y-76962000D03*
-X151446000Y-76962000D03*
-%TD*%
-%TO.C,C5*%
-X152846000Y-75464000D03*
-X151446000Y-75464000D03*
-%TD*%
-%TO.C,C3*%
-X160844000Y-80010000D03*
-X162244000Y-80010000D03*
-%TD*%
-%TO.C,C2*%
-X160844000Y-88138000D03*
-X162244000Y-88138000D03*
-%TD*%
-D18*
-%TO.C,U1*%
-X152440000Y-87437000D03*
-D19*
-X151715000Y-83212000D03*
-D18*
-X155940000Y-82487000D03*
-D20*
-X154190000Y-84962000D03*
-D19*
-X156665000Y-86712000D03*
-X156665000Y-86212000D03*
-X156665000Y-85712000D03*
-X156665000Y-85212000D03*
-X156665000Y-84712000D03*
-X156665000Y-84212000D03*
-X156665000Y-83712000D03*
-X156665000Y-83212000D03*
-D18*
-X155440000Y-82487000D03*
-X154940000Y-82487000D03*
-X154440000Y-82487000D03*
-X153940000Y-82487000D03*
-X153440000Y-82487000D03*
-X152940000Y-82487000D03*
-X152440000Y-82487000D03*
-D19*
-X151715000Y-83712000D03*
-X151715000Y-84212000D03*
-X151715000Y-84712000D03*
-X151715000Y-85212000D03*
-X151715000Y-85712000D03*
-X151715000Y-86212000D03*
-X151715000Y-86712000D03*
-D18*
-X152940000Y-87437000D03*
-X153440000Y-87437000D03*
-X153940000Y-87437000D03*
-X154440000Y-87437000D03*
-X154940000Y-87437000D03*
-X155440000Y-87437000D03*
-X155940000Y-87437000D03*
-%TD*%
-D17*
-%TO.C,R14*%
-X115062000Y-80964000D03*
-X115062000Y-79564000D03*
-%TD*%
-D15*
-%TO.C,U3*%
-X128204000Y-78058000D03*
-X126304000Y-78058000D03*
-X126304000Y-75358000D03*
-X127254000Y-75358000D03*
-X128204000Y-75358000D03*
-%TD*%
-M02*

manufacturing/CAD/ledTruck/gerber/ledTruck-NPTH.drl

@@ -1,17 +1,17 @@
 M48
-; DRILL file {KiCad (5.1.9-0-10_14)} date Thursday, February 18, 2021 at 10:12:30 PM
+; DRILL file {KiCad (5.1.9-0-10_14)} date Wednesday, April 21, 2021 at 08:12:03 PM
-; FORMAT={-:-/ absolute / inch / decimal}
+; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2021-02-18T22:12:30+01:00
+; #@! TF.CreationDate,2021-04-21T20:12:03+02:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,(5.1.9-0-10_14)
 ; #@! TF.FileFunction,NonPlated,1,2,NPTH
 FMAT,2
-INCH
+METRIC
-T1C0.0236
+T1C0.550
 %
 G90
 G05
 T1
-X4.3746Y-3.7013
+X4.037Y-21.492
-X4.3746Y-3.8587
+X4.037Y-25.492
 T0
 M30

manufacturing/CAD/ledTruck/gerber/ledTruck-PTH.drl

@@ -1,232 +1,278 @@
 M48
-; DRILL file {KiCad (5.1.9-0-10_14)} date Thursday, February 18, 2021 at 10:12:30 PM
+; DRILL file {KiCad (5.1.9-0-10_14)} date Wednesday, April 21, 2021 at 08:12:03 PM
-; FORMAT={-:-/ absolute / inch / decimal}
+; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2021-02-18T22:12:30+01:00
+; #@! TF.CreationDate,2021-04-21T20:12:03+02:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,(5.1.9-0-10_14)
 ; #@! TF.FileFunction,Plated,1,2,PTH
 FMAT,2
-INCH
+METRIC
-T1C0.0079
+T1C0.200
-T2C0.0157
+T2C0.406
-T3C0.0276
+T3C0.700
-T4C0.0315
+T4C0.750
-T5C0.0335
+T5C0.990
-T6C0.0394
+T6C1.000
-T7C0.0402
+T7C1.300
-T8C0.0728
 %
 G90
 G05
 T1
-X6.0311Y-3.3056
+X48.156Y-11.45
-X6.0311Y-3.345
+X48.156Y-12.45
-X6.0311Y-3.3843
+X48.156Y-13.45
-X6.0705Y-3.3056
+X49.156Y-11.45
-X6.0705Y-3.345
+X49.156Y-12.45
-X6.0705Y-3.3843
+X49.156Y-13.45
-X6.1098Y-3.3056
+X50.156Y-11.45
-X6.1098Y-3.345
+X50.156Y-12.45
-X6.1098Y-3.3843
+X50.156Y-13.45
 T2
-X4.46Y-4.14
+X1.27Y-2.032
-X4.46Y-4.37
+X1.27Y-3.302
-X4.5034Y-3.3666
+X1.519Y-43.566
-X4.52Y-2.97
+X1.519Y-44.836
-X4.53Y-3.77
+X2.281Y-23.373
-X4.59Y-3.19
+X2.54Y-2.032
-X4.61Y-3.94
+X2.916Y-44.836
-X4.6312Y-3.7288
+X7.615Y-10.038
-X4.64Y-3.65
+X7.62Y-25.349
-X4.75Y-3.6857
+X7.645Y-20.574
-X4.78Y-3.85
+X7.645Y-30.582
-X4.83Y-3.9
+X8.25Y-38.486
-X4.8398Y-2.9702
+X9.398Y-17.15
-X4.8398Y-3.2702
+X10.028Y-10.038
-X4.89Y-3.16
+X10.541Y-20.447
-X4.89Y-3.29
+X11.43Y-18.288
-X4.89Y-3.43
+X12.06Y-27.564
-X4.91Y-4.41
+X12.06Y-44.836
-X4.99Y-4.34
+X12.681Y-16.085
-X5.02Y-3.55
+X12.827Y-23.241
-X5.02Y-3.83
+X14.981Y-20.879
-X5.02Y-4.0
+X16.129Y-17.399
-X5.08Y-4.26
+X16.129Y-19.812
-X5.1487Y-3.2013
+X18.796Y-19.812
-X5.15Y-3.02
+X18.847Y-17.399
-X5.15Y-3.29
+X18.918Y-2.037
-X5.15Y-3.43
+X19.863Y-5.486
-X5.16Y-4.55
+X20.066Y-9.779
-X5.2Y-2.96
+X20.066Y-32.766
-X5.2Y-3.07
+X20.95Y-44.836
-X5.2188Y-3.7288
+X21.209Y-19.812
-X5.22Y-3.43
+X21.209Y-22.987
-X5.26Y-4.06
+X21.285Y-17.399
-X5.26Y-4.34
+X22.479Y-2.286
-X5.28Y-3.21
+X22.479Y-39.98
-X5.28Y-3.77
+X22.504Y-42.418
-X5.3Y-4.02
+X22.809Y-14.503
-X5.3Y-4.46
+X22.809Y-28.677
-X5.33Y-4.58
+X23.368Y-4.75
-X5.41Y-2.96
+X23.368Y-6.35
-X5.41Y-4.49
+X23.597Y-11.684
-X5.46Y-3.14
+X23.876Y-19.812
-X5.46Y-3.29
+X23.876Y-22.987
-X5.46Y-3.43
+X23.927Y-8.738
-X5.54Y-2.97
+X23.927Y-17.374
-X5.54Y-3.54
+X23.998Y-35.692
-X5.54Y-4.17
+X25.146Y-21.742
-X5.63Y-3.83
+X25.146Y-35.052
-X5.71Y-3.6
+X25.395Y-2.037
-X5.72Y-4.58
+X25.781Y-36.957
-X5.8084Y-3.9016
+X26.416Y-17.399
-X5.8643Y-3.6857
+X26.416Y-19.812
-X5.89Y-3.83
+X26.416Y-29.591
-X5.92Y-3.09
+X27.28Y-9.957
-X5.97Y-3.24
+X27.366Y-12.941
-X5.99Y-3.2
+X27.381Y-26.873
-X6.0115Y-4.0661
+X28.448Y-17.399
-X6.0615Y-3.1267
+X28.448Y-19.812
-X6.07Y-3.01
+X28.702Y-28.702
-X6.09Y-3.09
+X28.702Y-33.782
-X6.09Y-3.52
+X29.464Y-5.766
-X6.09Y-4.26
+X29.464Y-14.478
-X6.12Y-4.02
+X29.464Y-25.349
-X6.14Y-3.17
+X29.718Y-36.957
-X6.17Y-3.24
+X29.723Y-26.873
-X6.17Y-4.58
+X30.094Y-3.434
-X6.18Y-3.08
+X30.475Y-44.836
-X6.1885Y-3.66
+X30.729Y-30.612
-X6.2Y-4.07
+X30.734Y-38.862
-X6.21Y-4.01
+X31.11Y-13.081
-X6.21Y-2.94
+X31.115Y-23.762
-X6.23Y-3.09
+X32.126Y-2.037
-X6.24Y-3.47
+X32.512Y-36.068
-X6.26Y-3.33
+X32.532Y-17.348
-X6.26Y-4.36
+X34.412Y-3.434
-X6.2675Y-3.0174
+X34.544Y-43.942
-X6.27Y-2.95
+X36.068Y-17.526
-X6.2793Y-3.16
+X36.068Y-19.939
-X6.28Y-3.09
+X36.068Y-22.479
-X6.2934Y-3.2809
+X36.271Y-13.564
-X6.33Y-3.42
+X36.297Y-8.839
-X6.3438Y-2.96
+X36.347Y-4.166
-X6.37Y-3.65
+X37.206Y-2.037
-X6.41Y-3.9
+X38.857Y-25.024
-X6.44Y-3.09
+X38.857Y-27.945
-X6.54Y-3.06
+X38.984Y-44.836
-X6.56Y-3.15
+X40.0Y-19.944
-X6.56Y-3.47
+X41.275Y-22.606
-X6.62Y-4.58
+X42.286Y-11.308
-X6.66Y-3.69
+X43.028Y-20.879
-X6.66Y-3.84
+X43.048Y-8.006
-X6.79Y-3.9
+X43.429Y-6.101
-X6.84Y-3.55
+X43.917Y-30.658
-X6.99Y-3.77
+X43.942Y-9.398
-X7.12Y-3.31
+X44.907Y-7.752
-X7.12Y-3.44
+X44.907Y-4.47
-X7.12Y-4.03
+X44.908Y-10.609
-X7.12Y-4.19
+X46.096Y-15.118
-X7.12Y-4.37
+X46.223Y-22.484
-X7.12Y-4.58
+X46.223Y-25.024
-T5
+X46.355Y-9.906
-X4.3714Y-3.1304
+X46.858Y-17.658
-X4.3714Y-3.2485
+X47.366Y-31.12
-X4.3714Y-3.3666
+X47.366Y-34.168
-T6
+X47.366Y-38.74
-X6.9895Y-3.0713
+X47.366Y-44.836
-X7.088Y-3.0713
+X48.255Y-36.962
-T7
+X48.382Y-5.085
-X7.11Y-3.59
+X48.509Y-3.561
-X7.11Y-3.69
+X48.594Y-6.858
-X7.11Y-3.79
+X49.708Y-17.043
-X7.11Y-3.89
+X49.779Y-1.783
-T8
+X49.784Y-6.896
-X4.7257Y-3.0162
+X50.043Y-34.93
-X4.7257Y-3.2013
+X50.109Y-4.45
-X4.7257Y-3.3863
+X50.186Y-8.192
-X5.71Y-3.0162
+X50.8Y-17.043
-X5.71Y-3.2013
+X50.813Y-31.14
-X5.71Y-3.3863
+X50.952Y-6.909
-X6.6943Y-3.0162
+X51.67Y-15.742
-X6.6943Y-3.2013
+X52.172Y-6.096
-X6.6943Y-3.3863
+X52.446Y-25.024
-T2
+X52.476Y-21.742
-G00X4.3911Y-3.0005
+X52.527Y-10.439
-M15
+X52.984Y-29.616
-G01X4.3517Y-3.0005
+X53.716Y-5.847
-M16
+X53.758Y-7.419
-G05
+X54.097Y-3.688
-G00X4.3911Y-3.4965
+X54.859Y-38.994
-M15
+X55.24Y-44.836
-G01X4.3517Y-3.4965
+X55.644Y-10.534
-M16
+X55.677Y-7.188
-G05
+X55.748Y-20.579
-T3
+X55.748Y-22.484
-G00X4.3018Y-3.6383
+X55.748Y-25.024
-M15
+X55.753Y-33.909
-G01X4.2782Y-3.6383
+X55.88Y-35.966
-M16
+X55.88Y-37.978
-G05
+X56.134Y-4.877
-G00X4.3018Y-3.9217
+X56.764Y-40.518
-M15
+X56.785Y-1.651
-G01X4.2782Y-3.9217
+X56.828Y-34.93
-M16
+X56.845Y-16.764
-G05
+X56.845Y-26.314
-G00X4.4262Y-3.6383
+X57.81Y-17.323
-M15
+X57.81Y-30.785
-G01X4.4026Y-3.6383
+X58.796Y-25.024
-M16
+X58.796Y-28.707
-G05
+X58.859Y-21.468
-G00X4.4026Y-3.9217
+X59.304Y-37.978
-M15
+X59.431Y-6.355
-G01X4.4262Y-3.9217
+X59.558Y-15.626
-M16
+X59.893Y-7.976
-G05
+X59.919Y-9.677
+X60.376Y-2.87
+X60.808Y-5.563
+X61.59Y-15.626
+X62.941Y-1.676
+X63.241Y-44.836
+X63.957Y-17.018
+X65.019Y-21.468
+X65.019Y-25.024
+X65.019Y-28.707
+X66.015Y-17.602
+X67.208Y-15.85
+X68.702Y-17.658
+X70.206Y-18.161
+X71.115Y-1.783
+X71.115Y-11.308
+X71.115Y-16.134
+X71.115Y-21.468
+X71.115Y-25.024
+X71.115Y-28.707
+X74.493Y-23.754
+X75.56Y-11.308
+X75.56Y-16.134
+X75.814Y-29.85
+X75.814Y-33.914
+X75.814Y-38.486
+X76.708Y-44.958
+X76.957Y-1.783
+X78.486Y-43.434
+X78.486Y-44.958
+X78.588Y-25.019
+X78.608Y-1.783
+X78.608Y-3.434
 T4
-G00X4.6273Y-4.3469
+X74.544Y-6.228
-M15
+X76.544Y-6.228
-G01X4.6273Y-4.2761
+T5
-M16
+X3.0Y-7.5
+X3.0Y-12.0
+T6
+X76.586Y-18.671
+X76.586Y-21.211
+X76.586Y-23.751
+X76.586Y-26.291
+T7
+X5.49Y-6.24
+X5.49Y-13.25
+T3
+X2.187Y-19.892G85X1.587Y-19.892
 G05
-G00X4.6903Y-4.2131
+X2.187Y-27.092G85X1.587Y-27.092
-M15
-G01X4.7612Y-4.2131
-M16
 G05
-G00X4.8242Y-4.3469
+X5.347Y-19.892G85X4.747Y-19.892
-M15
-G01X4.8242Y-4.2761
-M16
 G05
-G00X5.6116Y-4.3469
+X4.747Y-27.092G85X5.347Y-27.092
-M15
-G01X5.6116Y-4.2761
-M16
 G05
-G00X5.6746Y-4.2131
+T6
-M15
+X14.0Y-33.2G85X16.0Y-33.2
-G01X5.7454Y-4.2131
-M16
 G05
-G00X5.8084Y-4.3469
+X14.25Y-41.3G85X15.75Y-41.3
-M15
-G01X5.8084Y-4.2761
-M16
 G05
-G00X6.5958Y-4.3469
+X18.55Y-37.15G85X18.55Y-35.65
-M15
-G01X6.5958Y-4.2761
-M16
 G05
-G00X6.6588Y-4.2131
+X39.0Y-33.2G85X41.0Y-33.2
-M15
-G01X6.7297Y-4.2131
-M16
 G05
-G00X6.7927Y-4.3469
+X39.25Y-41.3G85X40.75Y-41.3
-M15
+G05
-G01X6.7927Y-4.2761
+X43.55Y-37.15G85X43.55Y-35.65
-M16
+G05
+X64.0Y-33.2G85X66.0Y-33.2
+G05
+X64.25Y-41.3G85X65.75Y-41.3
+G05
+X68.55Y-37.15G85X68.55Y-35.65
+G05
+T7
+X14.4Y-4.1G85X15.6Y-4.1
+G05
+X14.4Y-8.8G85X15.6Y-8.8
+G05
+X14.4Y-13.5G85X15.6Y-13.5
+G05
+X39.4Y-4.1G85X40.6Y-4.1
+G05
+X39.4Y-8.8G85X40.6Y-8.8
+G05
+X39.4Y-13.5G85X40.6Y-13.5
+G05
+X64.4Y-4.1G85X65.6Y-4.1
+G05
+X64.4Y-8.8G85X65.6Y-8.8
+G05
+X64.4Y-13.5G85X65.6Y-13.5
 G05
 T0
 M30

manufacturing/CAD/ledTruck/gerber/ledTruck-job.gbrjob

@@ -1,128 +0,0 @@
-{
-  "Header":
-  {
-    "GenerationSoftware":
-    {
-      "Vendor":      "KiCad",
-      "Application": "Pcbnew",
-      "Version":     "(5.1.9-0-10_14)"
-    },
-    "CreationDate":  "2021-02-18T22:12:25+01:00"
-  },
-  "GeneralSpecs":
-  {
-    "ProjectId":
-    {
-      "Name": "ledTruck",
-      "GUID": "6c656454-7275-4636-9b2e-6b696361645f",
-      "Revision": "rev?"
-    },
-    "Size":
-    {
-      "X": 76.050,
-      "Y": 44.050
-    },
-    "LayerNumber": 2,
-    "BoardThickness":  1.600
-  },
-  "DesignRules":
-  [
-    {
-      "Layers": "Outer",
-      "PadToPad":  0.200,
-      "PadToTrack":  0.200,
-      "TrackToTrack":  0.200,
-      "MinLineWidth":  0.250,
-      "TrackToRegion":  0.508,
-      "RegionToRegion":  0.508
-    }
-  ],
-  "FilesAttributes":
-  [
-    {
-      "Path":  "ledTruck-F_Cu.gbr",
-      "FileFunction":  "Copper,L1,Top",
-      "FilePolarity":  "Positive"
-    },
-    {
-      "Path":  "ledTruck-B_Cu.gbr",
-      "FileFunction":  "Copper,L2,Bot",
-      "FilePolarity":  "Positive"
-    },
-    {
-      "Path":  "ledTruck-F_Paste.gbr",
-      "FileFunction":  "SolderPaste,Top",
-      "FilePolarity":  "Positive"
-    },
-    {
-      "Path":  "ledTruck-B_Paste.gbr",
-      "FileFunction":  "SolderPaste,Bot",
-      "FilePolarity":  "Positive"
-    },
-    {
-      "Path":  "ledTruck-F_SilkS.gbr",
-      "FileFunction":  "Legend,Top",
-      "FilePolarity":  "Positive"
-    },
-    {
-      "Path":  "ledTruck-B_SilkS.gbr",
-      "FileFunction":  "Legend,Bot",
-      "FilePolarity":  "Positive"
-    },
-    {
-      "Path":  "ledTruck-F_Mask.gbr",
-      "FileFunction":  "SolderMask,Top",
-      "FilePolarity":  "Negative"
-    },
-    {
-      "Path":  "ledTruck-B_Mask.gbr",
-      "FileFunction":  "SolderMask,Bot",
-      "FilePolarity":  "Negative"
-    },
-    {
-      "Path":  "ledTruck-Edge_Cuts.gbr",
-      "FileFunction":  "Profile",
-      "FilePolarity":  "Positive"
-    }
-  ],
-  "MaterialStackup":
-  [
-    {
-      "Type":  "Legend",
-      "Notes":  "Layer F.SilkS"
-    },
-    {
-      "Type":  "SolderPaste",
-      "Notes":  "Layer F.Paste"
-    },
-    {
-      "Type":  "SolderMask",
-      "Notes":  "Layer F.Mask"
-    },
-    {
-      "Type":  "Copper",
-      "Notes":  "Layer F.Cu"
-    },
-    {
-      "Type":  "Dielectric",
-      "Material":  "FR4",
-      "Notes":  "Layers L1/L2"
-    },
-    {
-      "Type":  "Copper",
-      "Notes":  "Layer B.Cu"
-    },
-    {
-      "Type":  "SolderMask",
-      "Notes":  "Layer B.Mask"
-    },
-    {
-      "Type":  "SolderPaste",
-      "Notes":  "Layer B.Paste"
-    },
-    {
-      "Type":  "Legend",
-      "Notes":  "Layer B.SilkS"
-    }
-  ]
-}