48 lines
2.3 KiB
C
48 lines
2.3 KiB
C
// See SetupX_Template.h for all options available
|
|
|
|
#define SSD1351_DRIVER
|
|
|
|
|
|
#define TFT_WIDTH 128
|
|
#define TFT_HEIGHT 128
|
|
|
|
#define STM32
|
|
#define TFT_SPI_PORT 1
|
|
|
|
#define SSD1351_1DOT5_INCH_128 // For 128 x 128 display
|
|
|
|
// Wiring:
|
|
// +-------------+------------+-------------------------------------------------------------------+
|
|
// | Display PCB | TFT_eSPI | Info |
|
|
// +-------------+------------+-------------------------------------------------------------------+
|
|
// | GND | GND (0V) | Common |
|
|
// | VCC | 5V or 3.3V | Better to power with 5V if display PCB supports it |
|
|
// | DIN | TFT_MOSI | SPI data |
|
|
// | SCK | TFT_SCLK | SPI clock |
|
|
// | DC | TFT_DC | Distinguish between a command or its data |
|
|
// | RST | TFT_RST | Hardware reset, can connect to MCU RST pin as well |
|
|
// | CS | TFT_CS | Chip select, Set to -1 if for manually use with multiple displays |
|
|
// +-------------+------------+-------------------------------------------------------------------+
|
|
|
|
//#define TFT_MOSI PA7
|
|
//#define TFT_SCLK PA5
|
|
#define TFT_DC PB1
|
|
#define TFT_RST PA12
|
|
#define TFT_CS PB0
|
|
|
|
|
|
|
|
#define LOAD_GLCD // Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts- 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
#define SMOOTH_FONT
|
|
|
|
|
|
#define SPI_FREQUENCY 20000000
|
|
//#define SPI_FREQUENCY 40000000 // Works after shielding the wires!
|