Serial console commands

BoardInterface.cpp

@@ -174,7 +174,7 @@ void BoardInterface::loadSettings() {
 
       // Save upgraded structure
       liveData->settings = liveData->tmpSettings;
-      saveSettings(); 
+      saveSettings();
     }
 
     // Apply settings from flash if needed
@@ -183,10 +183,25 @@ void BoardInterface::loadSettings() {
 }
 
 /**
- * Custom commands
- */
+   Custom commands
+*/
 void BoardInterface::customConsoleCommand(String cmd) {
-  
+
+  int8_t idx = cmd.indexOf("=");
+  if (idx == -1)
+    return;
+
+  String key = cmd.substring(0, idx);
+  String value = cmd.substring(idx + 1);
+
+  if (key == "serviceUUID") value.toCharArray(liveData->settings.serviceUUID, value.length() + 1);
+  if (key == "charTxUUID") value.toCharArray(liveData->settings.charTxUUID, value.length() + 1);
+  if (key == "charRxUUID") value.toCharArray(liveData->settings.charRxUUID, value.length() + 1);
+  if (key == "wifiSsid") value.toCharArray(liveData->settings.wifiSsid, value.length() + 1);
+  if (key == "wifiPassword") value.toCharArray(liveData->settings.wifiPassword, value.length() + 1);
+  if (key == "gprsApn") value.toCharArray(liveData->settings.gprsApn, value.length() + 1);
+  if (key == "remoteApiUrl") value.toCharArray(liveData->settings.remoteApiUrl, value.length() + 1);
+  if (key == "remoteApiKey") value.toCharArray(liveData->settings.remoteApiKey, value.length() + 1);
 }
 
 #endif // BOARDINTERFACE_CPP

RELEASENOTES.md

@@ -5,6 +5,15 @@
 - settings v4 (wifi/gprs/sdcard/ntp/..)
 - ble4 skipped if mac is not set (00:00:00:00:00:00)
 - improved menu
+- supported serial console commands
+    serviceUUID=xxx
+    charTxUUID=xxx
+    charRxUUID=xxx
+    wifiSsid=xxx
+    wifiPassword=xxx
+    gprsApn=xxx
+    remoteApiUrl=xxx
+    remoteApiKey=xxx
 
 ### v2.0.0 2020-12-02
 - Project renamed from eNiroDashboard to evDash

evDash.ino

@@ -1,11 +1,22 @@
 /*
- * 2020-12-02 
- * Project renamed from eNiroDashboard to evDash
- * 
+   2020-12-02
+   Project renamed from eNiroDashboard to evDash
+
   !! working only with OBD BLE 4.0 adapters
   !! Supported adapter is  Vgate ICar Pro (must be BLE4.0 version)
   !! Not working with standard BLUETOOTH 3 adapters
 
+  Supported serial console commands 
+
+    serviceUUID=xxx
+    charTxUUID=xxx
+    charRxUUID=xxx
+    wifiSsid=xxx
+    wifiPassword=xxx
+    gprsApn=xxx
+    remoteApiUrl=xxx
+    remoteApiKey=xxx
+
   Required libraries
   - esp32 board support
   - tft_espi
@@ -403,7 +414,7 @@ void startBleScan() {
   SIM800L
 */
 #ifdef SIM800L_ENABLED
-bool sim800lSetup() {  
+bool sim800lSetup() {
   Serial.println("Setting SIM800L module");
   SoftwareSerial* serial = new SoftwareSerial(SIM800L_RX, SIM800L_TX);
   serial->begin(9600);
@@ -416,22 +427,22 @@ bool sim800lSetup() {
     sim800l_ready = sim800l->isReady();
   }
 
-  if(!sim800l_ready) {
+  if (!sim800l_ready) {
     Serial.println("Problem to initialize SIM800L module");
   } else {
     Serial.println("SIM800L module initialized");
-    
+
     Serial.print("Setting GPRS APN to: ");
     Serial.println(liveData->settings.gprsApn);
 
     bool sim800l_gprs = sim800l->setupGPRS(liveData->settings.gprsApn);
-    for(uint8_t i = 0; i < 5 && !sim800l_gprs; i++) {
+    for (uint8_t i = 0; i < 5 && !sim800l_gprs; i++) {
       Serial.println("Problem to set GPRS connection, retry in 1 sec");
       delay(1000);
       sim800l_gprs = sim800l->setupGPRS(liveData->settings.gprsApn);
     }
 
-    if(sim800l_gprs) {
+    if (sim800l_gprs) {
       liveData->params.sim800l_enabled = true;
       Serial.println("GPRS OK");
     } else {
@@ -494,7 +505,7 @@ bool sendDataViaGPRS() {
   Serial.println(liveData->settings.remoteApiUrl);
 
   uint16_t rc = sim800l->doPost(liveData->settings.remoteApiUrl, "application/json", payload, 10000, 10000);
-  if(rc == 200) {
+  if (rc == 200) {
     Serial.println("HTTP POST successful");
   } else {
     // Failed...
@@ -563,7 +574,7 @@ void setup(void) {
   // Hold right button
   board->afterSetup();
 
-  #ifdef SD_ENABLED
+#ifdef SD_ENABLED
   // Init SDCARD
   /*if (!SD.begin(SD_CS, SD_MOSI, SD_MISO, SD_SCLK)) {
     Serial.println("SDCARD initialization failed!");
@@ -576,7 +587,7 @@ void setup(void) {
     } else {
     Serial.println("SDCARD initialization done.");
     }*/
-  #endif
+#endif
 
   // Start BLE connection
   line = "";
@@ -632,18 +643,18 @@ void loop() {
   }
 
   // Send command from TTY to OBD2
-  if (liveData->bleConnected) {
-    if (Serial.available()) {
-      ch = Serial.read();
-      if (ch == '\r' || ch == '\n') {
-        board->customConsoleCommand(line);
-        line = line + ch;
-        Serial.println(line);
+  if (Serial.available()) {
+    ch = Serial.read();
+    if (ch == '\r' || ch == '\n') {
+      board->customConsoleCommand(line);
+      line = line + ch;
+      Serial.println(line);
+      if (liveData->bleConnected) {
         liveData->pRemoteCharacteristicWrite->writeValue(line.c_str(), line.length());
-        line = "";
-      } else {
-        line = line + ch;
       }
+      line = "";
+    } else {
+      line = line + ch;
     }
 
     // Can send next command from queue to OBD
@@ -654,7 +665,7 @@ void loop() {
   }
 
 #ifdef SIM800L_ENABLED
-  if(liveData->params.lastDataSent + SIM800L_TIMER < liveData->params.currentTime && liveData->params.sim800l_enabled) {
+  if (liveData->params.lastDataSent + SIM800L_TIMER < liveData->params.currentTime && liveData->params.sim800l_enabled) {
     sendDataViaGPRS();
     liveData->params.lastDataSent = liveData->params.currentTime;
   }