Tooling/KlipperUM2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

refactored

Browse Source
This commit is contained in:
Willem Oldemans
2022-11-18 10:28:53 +01:00
parent 2ba49998a1
commit 36a534e54e
3 changed files with 104 additions and 125 deletions
Download Patch File Download Diff File Expand all files Collapse all files

43
UM2_v2.1.cfg
View File

@@ -13,49 +13,6 @@ max_temp: 110
[verify_heater heater_bed]
check_gain_time: 80
[stepper_x]
step_pin: PA3
dir_pin: !PA1
enable_pin: !PA5
microsteps: 16
rotation_distance: 40
endstop_pin: ^!PA0
position_endstop: 0
position_max: 230
homing_speed: 80.0
[stepper_y]
step_pin: PC5
dir_pin: PC4
enable_pin: !PC6
microsteps: 16
rotation_distance: 40
endstop_pin: ^!PA4
position_endstop: 225
position_max: 225
homing_speed: 80.0
[stepper_z]
step_pin: PC2
dir_pin: !PC1
enable_pin: !PC3
microsteps: 16
rotation_distance: 16
endstop_pin: ^!PA7
position_endstop = 207.890
position_min: -10
position_max: 232
homing_speed: 20.0
[extruder]
step_pin: PL7
dir_pin: !PL6
enable_pin: !PC0
microsteps: 16
rotation_distance: 10.07 #33.500
nozzle_diameter: 0.400
filament_diameter: 1.74
[led case_light]
white_pin: PH5
initial_WHITE: 0.8

49
bigtreetech-ebb-canbus-v1.2.cfg
View File

@@ -5,10 +5,8 @@
# See docs/Config_Reference.md for a description of parameters.
[mcu EBBCan]
#serial: /dev/serial/by-id/usb-Klipper_stm32g0b1xx_430057001150425539393020-if00
canbus_uuid: 82edf63bd1a9
# [mcu EBBCan]
# canbus_uuid: 82edf63bd1a9
[adxl345]
cs_pin: EBBCan: PB12
@@ -17,38 +15,6 @@ spi_software_mosi_pin: EBBCan: PB11
spi_software_miso_pin: EBBCan: PB2
axes_map: x,y,z
[extruder]
# step_pin: EBBCan: PD0
# dir_pin: !EBBCan: PD1
# enable_pin: !EBBCan: PD2
# microsteps: 16
# rotation_distance: 33.500
# nozzle_diameter: 0.400
# filament_diameter: 1.750
heater_pin: EBBCan: PB13
# sensor_type: EPCOS 100K B57560G104F
# sensor_pin: EBBCan: PA3
control: pid
pid_Kp: 21.527
pid_Ki: 1.063
pid_Kd: 108.982
min_temp: 0
max_temp: 270
sensor_type:MAX31865
sensor_pin: EBBCan: PA4
spi_bus: spi1
rtd_nominal_r: 100
rtd_reference_r: 430
rtd_num_of_wires: 2
pressure_advance: 0.78
# [tmc2209 extruder]
# uart_pin: EBBCan: PA15
# run_current: 0.650
# stealthchop_threshold: 999999
[fan]
pin: EBBCan: PA0
@@ -57,14 +23,19 @@ axes_map: x,y,z
heater: extruder
heater_temp: 50.0
#[neopixel hotend_rgb]
#pin: EBBCan:PD3
[bltouch]
sensor_pin: ^EBBCan:PB8
control_pin: EBBCan:PB9
z_offset: 1.230
# [tmc2209 extruder]
# uart_pin: EBBCan: PA15
# run_current: 0.650
# stealthchop_threshold: 999999
#[neopixel hotend_rgb]
#pin: EBBCan:PD3
#[filament_switch_sensor switch_sensor]
#switch_pin: EBBCan:PB4

137
printer.cfg
View File

@@ -9,61 +9,112 @@
[mcu]
serial: /dev/serial/by-id/usb-Arduino__www.arduino.cc__0042_8543034383735181D1B1-if00
[mcu EBBCan]
canbus_uuid: 82edf63bd1a9
[include UM2_v2.1.cfg]
[include bigtreetech-ebb-canbus-v1.2.cfg]
[printer]
kinematics: cartesian
max_velocity: 500
max_accel: 3000
max_z_velocity: 25
max_z_accel: 30
kinematics: cartesian
max_velocity: 500
max_accel: 3000
max_z_velocity: 25
max_z_accel: 30
# [safe_z_home]
# home_xy_position: 100, 100 # Change coordinates to the center of your print bed
# speed: 50
# z_hop: 10 # Move up 10mm
# z_hop_speed: 5
#steppers
[stepper_z]
step_pin: PC2
dir_pin: !PC1
enable_pin: !PC3
microsteps: 16
rotation_distance: 16
endstop_pin: ^!PA7
position_endstop = 207.890
position_min: -10
position_max: 232
homing_speed: 20.0
[stepper_x]
step_pin: PA3
dir_pin: !PA1
enable_pin: !PA5
microsteps: 16
rotation_distance: 40
endstop_pin: ^!PA0
position_endstop: 0
position_max: 230
homing_speed: 80.0
[stepper_y]
step_pin: PC5
dir_pin: PC4
enable_pin: !PC6
microsteps: 16
rotation_distance: 40
endstop_pin: ^!PA4
position_endstop: 225
position_max: 225
homing_speed: 80.0
[extruder]
step_pin: PL7
dir_pin: !PL6
enable_pin: !PC0
microsteps: 16
rotation_distance: 10.07
nozzle_diameter: 0.400
filament_diameter: 1.74
heater_pin: EBBCan: PB13
control: pid
pid_Kp: 21.527
pid_Ki: 1.063
pid_Kd: 108.982
min_temp: 0
max_temp: 270
sensor_type:MAX31865
sensor_pin: EBBCan: PA4
spi_bus: spi1
rtd_nominal_r: 100
rtd_reference_r: 430
rtd_num_of_wires: 2
pressure_advance: 0.78
##############################
# bed leveling #
##############################
[bed_screws]
screw1: 120, 185
screw1_name: "rear mid screw"
screw2: 20 ,20
screw2_name: "front left screw"
screw3: 220, 20
screw3_name: "front right screw"
horizontal_move_z: 5
screw1: 120, 185
screw1_name: "rear mid screw"
screw2: 20 ,20
screw2_name: "front left screw"
screw3: 220, 20
screw3_name: "front right screw"
horizontal_move_z: 5
[bed_mesh]
speed: 120
horizontal_move_z: 5
mesh_min: 15, 50
mesh_max: 190, 200
probe_count: 5, 3
speed: 120
horizontal_move_z: 5
mesh_min: 15, 50
mesh_max: 190, 200
probe_count: 3, 3
##############################
# Sensors #
##############################
[filament_motion_sensor runout]
# The minimum length of filament pulled through the sensor to trigger
# a state change on the switch_pin
# Default is 7 mm.
detection_length: 14.0
extruder: extruder
pause_on_runout: FALSE
runout_gcode:
{action_respond_info("RUNOUT: Filament runout")}
PAUSE
insert_gcode: {action_respond_info("RUNOUT: Filament inserted")}
# The minimum amount of time in seconds to delay between events.
# Events triggered during this time period will be silently
# ignored. The default is 3 seconds.
#event_delay: 3.0
# The amount of time to delay, in seconds, between the pause command
# dispatch and execution of the runout_gcode. It may be useful to
# increase this delay if OctoPrint exhibits strange pause behavior.
# Default is 0.5 seconds.
#pause_delay: 0.5
## XYE mcu E0DET
switch_pin: PB7
detection_length: 7.0
extruder: extruder
pause_on_runout: FALSE
runout_gcode:
{action_respond_info("RUNOUT: Filament runout")}
PAUSE
insert_gcode: {action_respond_info("RUNOUT: Filament inserted")}
switch_pin: PB7
[include mainsail.cfg]