hardware driver separation

src/config.h

@@ -27,12 +27,11 @@
     #define LILYGO_WATCH_2020_V1             //To use T-Watch2020, please uncomment this line
     #define LILYGO_WATCH_LVGL                   //To use LVGL, you need to enable the macro LVGL
     #define TWATCH_USE_PSRAM_ALLOC_LVGL
-    #define ENABLE_LVGL_FLUSH_DMA
     #include <LilyGoWatch.h>
 
     /*
     * firmeware version string
     */
-    #define __FIRMWARE__            "2020082601"
+    #define __FIRMWARE__            "2020082603"
 
 #endif // _CONFIG_H

src/gui/gui.cpp

@@ -52,15 +52,12 @@ LV_IMG_DECLARE(bg2)
  */
 void gui_setup(void)
 {
-    lv_coord_t hres = lv_disp_get_hor_res(NULL);
-    lv_coord_t vres = lv_disp_get_ver_res(NULL);
-
     //Create wallpaper
-    lv_obj_t *img_bin = lv_img_create( lv_scr_act() , NULL);  /*Create an image object*/
-    lv_img_set_src(img_bin, &bg2 );
-    lv_obj_set_width( img_bin, hres );
-    lv_obj_set_height( img_bin, vres );
-    lv_obj_align(img_bin, NULL, LV_ALIGN_CENTER, 0, 0);
+    lv_obj_t *img_bin = lv_img_create( lv_scr_act() , NULL );
+    lv_img_set_src( img_bin, &bg2 );
+    lv_obj_set_width( img_bin, lv_disp_get_hor_res( NULL ) );
+    lv_obj_set_height( img_bin, lv_disp_get_ver_res( NULL ) );
+    lv_obj_align( img_bin, NULL, LV_ALIGN_CENTER, 0, 0 );
 
     mainbar_setup();
     /* add the four mainbar screens */
@@ -79,7 +76,7 @@ void gui_setup(void)
     update_tile_setup();
 
     statusbar_setup();
-    lv_disp_trig_activity(NULL);
+    lv_disp_trig_activity( NULL );
 
     keyboard_setup();
 

src/gui/mainbar/setup_tile/battery_settings/battery_view.cpp

@@ -196,10 +196,9 @@ static void exit_battery_view_event_cb( lv_obj_t * obj, lv_event_t event ) {
 
 void battery_view_update_task( lv_task_t *task ) {
     char temp[16]="";
-    TTGOClass *ttgo = TTGOClass::getWatch();
 
-    if ( pmu_get_battery_percent( ttgo ) >= 0 ) {
-        snprintf( temp, sizeof( temp ), "%0.1fmAh", ttgo->power->getCoulombData() );
+    if ( pmu_get_battery_percent( ) >= 0 ) {
+        snprintf( temp, sizeof( temp ), "%0.1fmAh", pmu_get_coulumb_data() );
     }
     else {
         snprintf( temp, sizeof( temp ), "unknown" );        
@@ -211,19 +210,19 @@ void battery_view_update_task( lv_task_t *task ) {
     lv_label_set_text( battery_view_design_cap, temp );
     lv_obj_align( battery_view_design_cap, lv_obj_get_parent( battery_view_design_cap ), LV_ALIGN_IN_RIGHT_MID, -5, 0 );
 
-    snprintf( temp, sizeof( temp ), "%0.2fV", ttgo->power->getBattVoltage() / 1000 );
+    snprintf( temp, sizeof( temp ), "%0.2fV", pmu_get_battery_voltage() / 1000 );
     lv_label_set_text( battery_view_voltage, temp );
     lv_obj_align( battery_view_voltage, lv_obj_get_parent( battery_view_voltage ), LV_ALIGN_IN_RIGHT_MID, -5, 0 );
 
-    snprintf( temp, sizeof( temp ), "%0.1fmA", ttgo->power->getBattChargeCurrent() );
+    snprintf( temp, sizeof( temp ), "%0.1fmA", pmu_get_battery_charge_current() );
     lv_label_set_text( charge_view_current, temp );
     lv_obj_align( charge_view_current, lv_obj_get_parent( charge_view_current ), LV_ALIGN_IN_RIGHT_MID, -5, 0 );
 
-    snprintf( temp, sizeof( temp ), "%0.1fmA", ttgo->power->getBattDischargeCurrent() );
+    snprintf( temp, sizeof( temp ), "%0.1fmA", pmu_get_battery_discharge_current() );
     lv_label_set_text( discharge_view_current, temp );
     lv_obj_align( discharge_view_current, lv_obj_get_parent( discharge_view_current ), LV_ALIGN_IN_RIGHT_MID, -5, 0 );
 
-    snprintf( temp, sizeof( temp ), "%0.2fV", ttgo->power->getVbusVoltage() / 1000 );
+    snprintf( temp, sizeof( temp ), "%0.2fV", pmu_get_vbus_voltage() / 1000 );
     lv_label_set_text( vbus_view_voltage, temp );
     lv_obj_align( vbus_view_voltage, lv_obj_get_parent( vbus_view_voltage ), LV_ALIGN_IN_RIGHT_MID, -5, 0 );
 }

src/gui/splashscreen.cpp

@@ -82,5 +82,6 @@ void splash_screen_stage_finish( TTGOClass *ttgo ) {
         delay(1);
     }    
     lv_obj_del( preload );
+    lv_obj_del( preload_label );
     lv_task_handler();
 }

src/hardware/bma.cpp

@@ -41,7 +41,8 @@ void IRAM_ATTR bma_irq( void );
 /*
  *
  */
-void bma_setup( TTGOClass *ttgo ) {
+void bma_setup( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
 
     bma_event_handle = xEventGroupCreate();
 
@@ -120,7 +121,8 @@ void IRAM_ATTR  bma_irq( void ) {
 /*
  * loop routine for handling IRQ in main loop
  */
-void bma_loop( TTGOClass *ttgo ) {
+void bma_loop( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
     /*
      * handle IRQ event
      */

src/hardware/bma.h

@@ -42,11 +42,11 @@
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void bma_setup( TTGOClass *ttgo );
+    void bma_setup( void );
     /*
      * @brief loop function for activity measurement
      */
-    void bma_loop( TTGOClass *ttgo );
+    void bma_loop( void );
     /*
      * @brief put bma into standby, depending on ther config
      */

src/hardware/driver/i2c_bus.cpp

@@ -0,0 +1,94 @@
+#include "i2c_bus.h"
+#include "Wire.h"
+#include <Arduino.h>
+
+void I2C_Bus::scan(void)
+{
+    uint8_t err, addr;
+    int nDevices = 0;
+    for (addr = 1; addr < 127; addr++) {
+        _port->beginTransmission(addr);
+        err = _port->endTransmission();
+        if (err == 0) {
+            Serial.print("I2C device found at address 0x");
+            if (addr < 16)
+                Serial.print("0");
+            Serial.print(addr, HEX);
+            Serial.println(" !");
+            nDevices++;
+        } else if (err == 4) {
+            Serial.print("Unknow error at address 0x");
+            if (addr < 16)
+                Serial.print("0");
+            Serial.println(addr, HEX);
+        }
+    }
+    if (nDevices == 0)
+        Serial.println("No I2C devices found\n");
+    else
+        Serial.println("done\n");
+}
+
+
+uint16_t I2C_Bus::readBytes(uint8_t addr, uint8_t *data, uint16_t len, uint16_t delay_ms)
+{
+    uint16_t ret = 0;
+    xSemaphoreTakeRecursive(_i2c_mux, portMAX_DELAY);
+    uint8_t cnt = _port->requestFrom(addr, (uint8_t)len, (uint8_t)1);
+    if (!cnt) {
+        ret =  1 << 13;
+    }
+    uint16_t index = 0;
+    while (_port->available()) {
+        if (index > len)return 1 << 14;
+        if (delay_ms)delay(delay_ms);
+        data[index++] = _port->read();
+    }
+    xSemaphoreGiveRecursive(_i2c_mux);
+    return ret;
+}
+
+
+uint16_t I2C_Bus::readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    uint16_t ret = 0;
+    xSemaphoreTakeRecursive(_i2c_mux, portMAX_DELAY);
+    _port->beginTransmission(addr);
+    _port->write(reg);
+    _port->endTransmission(false);
+    uint8_t cnt = _port->requestFrom(addr, (uint8_t)len, (uint8_t)1);
+    if (!cnt) {
+        ret =  1 << 13;
+    }
+    uint16_t index = 0;
+    while (_port->available()) {
+        if (index > len)return 1 << 14;
+        data[index++] = _port->read();
+    }
+    xSemaphoreGiveRecursive(_i2c_mux);
+    return ret;
+}
+
+uint16_t I2C_Bus::writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    uint16_t ret = 0;
+    xSemaphoreTakeRecursive(_i2c_mux, portMAX_DELAY);
+    _port->beginTransmission(addr);
+    _port->write(reg);
+    for (uint16_t i = 0; i < len; i++) {
+        _port->write(data[i]);
+    }
+    ret =  _port->endTransmission();
+    xSemaphoreGiveRecursive(_i2c_mux);
+    return ret ? 1 << 12 : ret;
+}
+
+bool I2C_Bus::deviceProbe(uint8_t addr)
+{
+    uint16_t ret = 0;
+    xSemaphoreTakeRecursive(_i2c_mux, portMAX_DELAY);
+    _port->beginTransmission(addr);
+    ret = _port->endTransmission();
+    xSemaphoreGiveRecursive(_i2c_mux);
+    return (ret == 0);
+}

src/hardware/driver/i2c_bus.h

@@ -0,0 +1,26 @@
+#ifndef I2C_BUS_H
+    #define I2C_BUS_H
+
+    #include <Wire.h>
+    #include "freertos/FreeRTOS.h"
+    #include "freertos/semphr.h"
+
+    class I2C_Bus {
+    public:
+        I2C_Bus(TwoWire &port = Wire, int sda = 21, int scl = 22)
+        {
+            _port = &port;
+            _port->begin(sda, scl);
+            _i2c_mux = xSemaphoreCreateRecursiveMutex();
+        };
+        void scan();
+        uint16_t readBytes(uint8_t addr, uint8_t *data, uint16_t len, uint16_t delay_ms = 0);
+        uint16_t readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint16_t len);
+        uint16_t writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint16_t len);
+        bool deviceProbe(uint8_t addr);
+    private:
+        TwoWire *_port;
+        SemaphoreHandle_t _i2c_mux = NULL;
+    };
+
+#endif // I2C_BUS_H

src/hardware/pmu.cpp

@@ -13,19 +13,19 @@
 #include "gui/statusbar.h"
 
 EventGroupHandle_t pmu_event_handle = NULL;
-
 void IRAM_ATTR pmu_irq( void );
-
 pmu_config_t pmu_config;
 
 /*
  * init the pmu: AXP202 
  */
-void pmu_setup( TTGOClass *ttgo ) {
+void pmu_setup( void ) {
     pmu_event_handle = xEventGroupCreate();
 
     pmu_read_config();
 
+    TTGOClass *ttgo = TTGOClass::getWatch();
+
     // Turn on the IRQ used
     ttgo->power->adc1Enable( AXP202_BATT_VOL_ADC1 | AXP202_BATT_CUR_ADC1 | AXP202_VBUS_VOL_ADC1 | AXP202_VBUS_CUR_ADC1, AXP202_ON);
     ttgo->power->enableIRQ( AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_CHARGING_FINISHED_IRQ | AXP202_TIMER_TIMEOUT_IRQ, AXP202_ON );
@@ -249,10 +249,12 @@ void pmu_set_experimental_power_save( bool value ) {
 /*
  * loop routine for handling IRQ in main loop
  */
-void pmu_loop( TTGOClass *ttgo ) {
+void pmu_loop( void ) {
     static uint64_t nextmillis = 0;
     bool updatetrigger = false;
 
+    TTGOClass *ttgo = TTGOClass::getWatch();
+
     /*
      * handle IRQ event
      */
@@ -294,13 +296,15 @@ void pmu_loop( TTGOClass *ttgo ) {
     if ( !powermgm_get_event( POWERMGM_STANDBY ) ) {
         if ( nextmillis < millis() || updatetrigger == true ) {
             nextmillis = millis() + 1000;
-            statusbar_update_battery( pmu_get_battery_percent( ttgo ), ttgo->power->isChargeing(), ttgo->power->isVBUSPlug() );
-            blectl_update_battery( pmu_get_battery_percent( ttgo ), ttgo->power->isChargeing(), ttgo->power->isVBUSPlug() );
+            statusbar_update_battery( pmu_get_battery_percent(), ttgo->power->isChargeing(), ttgo->power->isVBUSPlug() );
+            blectl_update_battery( pmu_get_battery_percent(), ttgo->power->isChargeing(), ttgo->power->isVBUSPlug() );
         }
     }
 }
 
-int32_t pmu_get_battery_percent( TTGOClass *ttgo ) {
+int32_t pmu_get_battery_percent( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
+
     if ( ttgo->power->getBattChargeCoulomb() < ttgo->power->getBattDischargeCoulomb() || ttgo->power->getBattVoltage() < 3200 ) {
         ttgo->power->ClearCoulombcounter();
     }
@@ -312,3 +316,28 @@ int32_t pmu_get_battery_percent( TTGOClass *ttgo ) {
         return( ttgo->power->getBattPercentage() );
     }
 }
+
+float pmu_get_battery_voltage( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
+    return( ttgo->power->getBattVoltage() );
+}
+
+float pmu_get_battery_charge_current( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
+    return( ttgo->power->getBattChargeCurrent() );
+}
+
+float pmu_get_battery_discharge_current( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
+    return( ttgo->power->getBattDischargeCurrent() );
+}
+
+float pmu_get_vbus_voltage( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
+    return( ttgo->power->getVbusVoltage() );
+}
+
+float pmu_get_coulumb_data( void ) {
+    TTGOClass *ttgo = TTGOClass::getWatch();
+    return( ttgo->power->getCoulombData() );
+}

src/hardware/pmu.h

@@ -48,13 +48,13 @@
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void pmu_setup( TTGOClass *ttgo );
+    void pmu_setup( void );
     /*
      * @brief pmu loop routine, call from powermgm. not for user use
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void pmu_loop( TTGOClass *ttgo );
+    void pmu_loop( void );
     /*
      *
      * @brief get the charge of battery in percent
@@ -63,7 +63,7 @@
      * 
      * @return  charge in percent or -1 if unknown
      */
-    int32_t pmu_get_battery_percent( TTGOClass *ttgo );
+    int32_t pmu_get_battery_percent( void );
     /*
      * @brief set the axp202 in standby
      */
@@ -99,5 +99,10 @@
     int32_t pmu_get_designed_battery_cap( void );
     bool pmu_get_silence_wakeup( void );
     void pmu_set_silence_wakeup( bool value );
+    float pmu_get_battery_voltage( void );
+    float pmu_get_battery_charge_current( void );
+    float pmu_get_battery_discharge_current( void );
+    float pmu_get_vbus_voltage( void );
+    float pmu_get_coulumb_data( void );
 
 #endif // _PMU_H

src/hardware/powermgm.cpp

@@ -48,23 +48,25 @@ portMUX_TYPE powermgmMux = portMUX_INITIALIZER_UNLOCKED;
 /*
  *
  */
-void powermgm_setup( TTGOClass *ttgo ) {
+void powermgm_setup( void ) {
 
     powermgm_status = xEventGroupCreate();
 
-    pmu_setup( ttgo );
-    bma_setup( ttgo );
+    pmu_setup();
+    bma_setup();
     wifictl_setup();
     blectl_read_config();
-    timesync_setup( ttgo );
-    touch_setup( ttgo );
+    timesync_setup();
+    touch_setup();
     sound_setup();
 }
 
 /*
  *
  */
-void powermgm_loop( TTGOClass *ttgo ) {
+void powermgm_loop( void ) {
+
+    TTGOClass *ttgo = TTGOClass::getWatch();
 
     // check if a button or doubleclick was release
     if( powermgm_get_event( POWERMGM_PMU_BUTTON | POWERMGM_BMA_DOUBLECLICK ) ) {
@@ -162,12 +164,12 @@ void powermgm_loop( TTGOClass *ttgo ) {
 
     if ( powermgm_get_event( POWERMGM_STANDBY ) ) {
         vTaskDelay( 100 );
-        pmu_loop( ttgo );
-        bma_loop( ttgo );
+        pmu_loop();
+        bma_loop();
     }
     else {
-        pmu_loop( ttgo );
-        bma_loop( ttgo );
+        pmu_loop();
+        bma_loop();
         display_loop( ttgo );
     }
 }

src/hardware/powermgm.h

@@ -38,13 +38,13 @@
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void powermgm_setup( TTGOClass *ttgo );
+    void powermgm_setup( void );
     /*
      * @brief power managment loop routine, call from loop. not for user use
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void powermgm_loop( TTGOClass *ttgo );
+    void powermgm_loop( void );
     /*
      * @brief trigger a power managemt event
      * 

src/hardware/timesync.cpp

@@ -37,7 +37,7 @@ timesync_config_t timesync_config;
 
 void timesync_wifictl_event_cb( EventBits_t event, char* msg );
 
-void timesync_setup( TTGOClass *ttgo ) {
+void timesync_setup( void ) {
 
     timesync_read_config();
     time_event_handle = xEventGroupCreate();

src/hardware/timesync.h

@@ -40,7 +40,7 @@
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void timesync_setup( TTGOClass *ttgo );
+    void timesync_setup( void );
     /*
      * @brief save config for timesync to spiffs
      */

src/hardware/touch.cpp

@@ -29,13 +29,14 @@ lv_indev_t *touch_indev = NULL;
 static bool touch_read(lv_indev_drv_t * drv, lv_indev_data_t*data);
 static bool touch_getXY( int16_t &x, int16_t &y );
 
-void touch_setup( TTGOClass *ttgo ) {
+void touch_setup( void ) {
     touch_indev = lv_indev_get_next( NULL );
 
     touch_indev->driver.read_cb = touch_read;
 }
 
 static bool touch_getXY( int16_t &x, int16_t &y ) {
+    
     TTGOClass *ttgo = TTGOClass::getWatch();
     TP_Point p;
     static bool touch_press = false;

src/hardware/touch.h

@@ -29,6 +29,6 @@
      * 
      * @param   ttgo    pointer to an TTGOClass
      */
-    void touch_setup( TTGOClass *ttgo );
+    void touch_setup( void );
 
 #endif // _TOUCH_H

src/my-ttgo-watch.ino

@@ -74,7 +74,7 @@ void setup()
     ttgo->rtc->syncToSystem();
 
     splash_screen_stage_update( "init powermgm", 60 );
-    powermgm_setup( ttgo );
+    powermgm_setup();
 
     splash_screen_stage_update( "init gui", 80 );
     gui_setup(); 
@@ -112,5 +112,5 @@ void loop()
 {
     delay(5);
     gui_loop( ttgo );
-    powermgm_loop( ttgo );
+    powermgm_loop();
 }

ttgo-t-watch2020_v1.version.json

@@ -1 +1 @@
-{"version":"2020082601","host":"http://www.neo-guerillaz.de","file":"ttgo-t-watch2020_v1.ino.bin"}
+{"version":"2020082603","host":"http://www.neo-guerillaz.de","file":"ttgo-t-watch2020_v1.ino.bin"}