led-board v1.0

2021-03-18 21:15:12 +01:00
parent 65c9807cac
commit d0df1d9353
15 changed files with 3609 additions and 2807 deletions
--- a/variants/NUCLEO_L031K6/variant.h
+++ b/variants/NUCLEO_L031K6/variant.h
@@ -0,0 +1,120 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PA10 0
+#define PA9  1
+#define PA12 2
+#define PB0  3
+#define PB7  4
+#define PB6  5
+#define PB1  6
+#define PC14 7
+#define PC15 8
+#define PA8  9
+#define PA11 10
+#define PB5  11
+#define PB4  12
+#define PB3  13 // LED
+#define PA0  14 // A0
+#define PA1  15 // A1
+#define PA3  16 // A2
+#define PA4  17 // A3
+#define PA5  18 // A4
+#define PA6  19 // A5
+#define PA7  20 // A6
+#define PA2  21 // A7 - STLink Tx
+#define PA15 22 // STLink Rx
+#define PB2  23
+#define PB8  24
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        25
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       7
+#define NUM_ANALOG_FIRST        14
+
+// On-board LED pin number
+//#define LED_BUILTIN             13
+//#define LED_GREEN               LED_BUILTIN
+
+// I2C Definitions
+#define PIN_WIRE_SDA            4
+#define PIN_WIRE_SCL            5
+
+//Timer Definitions
+#define TIMER_TONE              TIM2
+#define TIMER_SERVO             TIM21
+
+// UART Definitions
+#define SERIAL_UART_INSTANCE    2 //ex: 2 for Serial2 (USART2)
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA15
+#define PIN_SERIAL_TX           PA2
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #define SERIAL_PORT_MONITOR     Serial
+  #define SERIAL_PORT_HARDWARE    Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */