added dynamic display (full buffer) + DAC + ADC

MilliOhmMeter_FW/platformio.ini

@@ -14,4 +14,4 @@ board = heltec_wifi_lora_32_V2
 framework = arduino
 monitor_speed = 115200
 lib_ldf_mode = deep+
-lib_deps = 
+lib_deps = adafruit/Adafruit ADS1X15@^2.2.0

MilliOhmMeter_FW/src/board.cpp

@@ -1,6 +1,8 @@
 #include "board.h"
 #include "Arduino.h"
 
+#include <Wire.h> //include Wire.h library
+
 void VextOn(void)
 {
   //Heltec.begin(true,false,true);
@@ -16,3 +18,46 @@ void initBoard(void)
   VextOn();
   Serial.println("OK");
 }
+
+void scanI2C(void)
+{
+  byte error, address; //variable for error and I2C address
+  int nDevices;
+
+  Serial.println("Scanning...");
+
+  nDevices = 0;
+  for (address = 1; address < 127; address++)
+  {
+    // The i2c_scanner uses the return value of
+    // the Write.endTransmisstion to see if
+    // a device did acknowledge to the address.
+    Wire.beginTransmission(address);
+    error = Wire.endTransmission();
+
+    if (error == 0)
+    {
+      Serial.print("I2C device found at address 0x");
+      if (address < 16)
+        Serial.print("0");
+      Serial.print(address, HEX);
+      Serial.println("  !");
+      nDevices++;
+    }
+    else if (error == 4)
+    {
+      Serial.print("Unknown error at address 0x");
+      if (address < 16)
+        Serial.print("0");
+      Serial.println(address, HEX);
+    }
+  }
+  if (nDevices == 0)
+  {
+    Serial.println("No I2C devices found\n");
+  }
+  else
+  {
+    Serial.println("done\n");
+  }
+}

MilliOhmMeter_FW/src/board.h

@@ -1,12 +1,23 @@
 #pragma once
 
 void initBoard(void);
+void scanI2C(void);
 
 #define HAS_DISPLAY
 #define HAS_SSD1322
-//#define HAS_SSD1306
-
 
 #define OLED_CS   14
 #define OLED_DC   17
-#define OLED_RST 4
+#define OLED_RST  23
+#define OLED_MOSI 27
+#define OLED_SCK  5
+
+#define ADC_SDA   4
+#define ADC_SCL   15
+
+#define DAC1_OUT  26
+
+#define BUTTON1   21
+#define BUTTON2   12
+#define BUTTON3   13
+#define BUTTON4   16

MilliOhmMeter_FW/src/display.cpp

@@ -12,13 +12,11 @@ c_onScreenButton wifiState("Wifi", 9, LocRight, &getWifiState);
 
 std::vector<c_onScreenButton> MainScreen;
 
-#ifdef HAS_SSD1322
-
 #define FONT8 u8g2_font_helvR08_tf
 #define FONT16 u8g2_font_7x14_tf
 #define FONT24 u8g2_font_freedoomr25_tn //u8g2_font_logisoso24_tf
 
-U8G2_SSD1322_NHD_256X64_2_4W_HW_SPI display(U8G2_R0, OLED_CS, OLED_DC, OLED_RST);
+U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI display(U8G2_R0, OLED_CS, OLED_DC, OLED_RST);
 
 void initMainScreenButtons(void)
 {
@@ -117,6 +115,10 @@ void c_onScreenButton::drawButton()
     //hide button
     return;
   }
+  display.setDrawColor(0);
+  display.drawBox(_xpos, _ypos, _width, _height);
+  display.setDrawColor(1);
+
 
   if (getState())
   {
@@ -134,7 +136,7 @@ void c_onScreenButton::drawButton()
   display.setDrawColor(1);
 }
 
-String showValue(String designator, double value, String unit)
+String showValue(String designator, float value, String unit)
 {
   String text;
   text.clear();
@@ -162,11 +164,6 @@ void drawProgressBar(uint16_t x, uint16_t y, uint16_t width, uint16_t height, ui
 
 void drawMeasurementValues()
 {
-  // display.setFont(FONT16);
-  // display.drawStr(0, 12, showValue("m:", getMin(), "").c_str());
-  // display.drawStr(80, 12, showValue("r:", getRms(), "").c_str());
-  // display.drawStr(160, 12, showValue("m:", getMax(), "").c_str());
-
   drawDashedHLine(0,12,220);
   drawDashedVLine(40,12,33);
   display.setFont(FONT8);
@@ -175,7 +172,9 @@ void drawMeasurementValues()
 
   display.setFont(FONT24);
 
-  display.drawStr(60, 45, showValue("", getValue(), "").c_str());
+  //display.drawStr(60, 45, String(getValue()).c_str());
+  display.setCursor(60,45);
+  display.printf("%4.2f",getValue());
   uint16_t stringwidth = display.getStrWidth(showValue("", getValue(), "").c_str());
   display.setFont(u8g2_font_8x13_t_symbols);
   display.drawUTF8(60+stringwidth+3 , 43, "mΩ");
@@ -213,12 +212,13 @@ void handleDisplay()
   uint64_t currentmillis = millis();
   if (currentmillis - lastDisplayTime > SCREENREFRESH)
   {
-    do
-    {
+    display.clearBuffer();
+    
+    // do
+    // {
        drawMainScreen();
-    } while (display.nextPage());
+    // } while (display.nextPage());
+    display.sendBuffer();
     lastDisplayTime = millis();
   }
 }
-
-#endif

MilliOhmMeter_FW/src/main.cpp

@@ -25,5 +25,5 @@ void loop()
   handleLeds();
   handleMeasure();
 
-  Serial.printf("T=%4.2f\n", (double)(micros() - looptime)/1000);
+  Serial.printf("T=%4.2fms\n", (double)(micros() - looptime)/1000);
 }

MilliOhmMeter_FW/src/measure.cpp

@@ -1,12 +1,78 @@
 #include "measure.h"
 
+Adafruit_ADS1015 ads; /* Use this for the 12-bit version */
+
+uint64_t lastMeasurement = 0;
+uint64_t lastDacWrite = 0;
+bool dacDir = false;
+int deg = 0;
+
+float ADCvolts = 0;
+
+void handleADC(void)
+{
+  uint64_t currentmillis = millis();
+  if (currentmillis - lastMeasurement > MEASUREMENTINTERVAL)
+  {
+    ADCvolts = ads.computeVolts(ads.readADC_SingleEnded(0));
+
+    lastMeasurement = currentmillis;
+  }
+}
+
+void handleDAC(void)
+{
+  uint64_t currentmillis = millis();
+  if (currentmillis - lastDacWrite > DACINTERVAL)
+  {
+    if (deg >= 254)
+    {
+      dacDir = false;
+      deg = 254;
+    }
+    if (deg <= 0)
+    {
+      dacDir = true;
+      deg = 0;
+    }
+
+    dacWrite(DAC1_OUT, deg);
+    
+    if (dacDir)
+    {
+      deg += DACSTEP;
+    }
+    else
+    {
+      deg -= DACSTEP;
+    }
+
+
+    lastDacWrite = currentmillis;
+  }
+}
+
 void initMeasure(void)
 {
-
+  Serial.print("init measurements:ADC=");
+  if (!ads.begin())
+  {
+    Serial.println("Failed to initialize ADS.");
   }
+  else
+  {
+    Serial.println("OK");
+  }
+  lastMeasurement = millis();
+  lastDacWrite = millis();
+
+  pinMode(BUTTON3, INPUT_PULLUP);
+}
+
 void handleMeasure(void)
 {
-
+  handleADC();
+  handleDAC();
 }
 
 measureMode getMeasureMode(void)
@@ -34,9 +100,10 @@ uint8_t getBar(void)
   return 68;
 }
 
-double getValue(void)
+float getValue(void)
 {
-  return 144.8;
+  Serial.printf("ADCvolts:%4.2fV\n",ADCvolts);
+  return ADCvolts;
 }
 
 bool getErrorState(void)
@@ -46,7 +113,7 @@ bool getErrorState(void)
 
 bool getOkState(void)
 {
-  return true;
+  return digitalRead(BUTTON3);
 }
 
 bool getOpenState(void)

MilliOhmMeter_FW/src/measure.h

@@ -1,6 +1,12 @@
 #pragma once
 
 #include "Arduino.h"
+#include "board.h"
+#include <Adafruit_ADS1X15.h>
+
+#define MEASUREMENTINTERVAL 10 //ms
+#define DACINTERVAL         10 //ms
+#define DACSTEP             8 //ticks
 
 enum measureMode
 {
@@ -23,7 +29,7 @@ double getMin( void);
 double getMax(void);
 double getRms(void);
 uint8_t getBar(void);
-double getValue(void);
+float getValue(void);
 
 bool getErrorState(void);
 bool getOkState(void);