remove ssd1306 support and move u8g2 lib locally

MilliOhmMeter_FW/lib/U8g2/examples/u8x8/ArduboyTest/ArduboyTest.ino

@@ -0,0 +1,140 @@
+/*
+
+  Arduboy.ino
+  
+  Arduboy Test Example with U8x8
+
+  Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+  Copyright (c) 2016, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+*/
+
+#include <Arduino.h>
+#include <Arduboy.h>
+#include <U8x8lib.h>
+
+#ifdef U8X8_HAVE_HW_SPI
+#include <SPI.h>
+#endif
+
+// Arduboy 10 (Production, Kickstarter Edition)
+U8X8_SSD1306_128X64_NONAME_4W_HW_SPI u8x8(/* cs=*/ 12, /* dc=*/ 4, /* reset=*/ 6);	
+
+ArduboyCore arduboyCore;
+ArduboyAudio arduboyAudio;
+ArduboyTunes arduboyTunes;
+  
+void setup(void)
+{
+  //u8x8.begin(/*Select=*/ A0, /*Right/Next=*/ 5, /*Left/Prev=*/ 9, /*Up=*/ 8, /*Down=*/ 10, /*Home/Cancel=*/ A1); // Arduboy DevKit
+  u8x8.begin(/*Select=*/ 7, /*Right/Next=*/ A1, /*Left/Prev=*/ A2, /*Up=*/ A0, /*Down=*/ A3, /*Home/Cancel=*/ 8); // Arduboy 10 (Production)
+  
+  arduboyTunes.initChannel(PIN_SPEAKER_1);
+  arduboyTunes.initChannel(PIN_SPEAKER_2);
+  arduboyAudio.begin();
+}
+
+void msg(const char *txt)
+{
+  u8x8.clear();
+  u8x8.print(txt);
+}
+
+void loop(void)
+{
+  static uint8_t c = 1;
+  static uint8_t b = 0;
+  u8x8.setFont(u8x8_font_chroma48medium8_r);
+  c = u8x8.userInterfaceSelectionList("Arduboy Test\n", c, "LED Test\nButton Test\nSpeaker Test");
+  if ( c == 1 )
+  {
+    msg("LED Test");
+    arduboyCore.setRGBled(255, 0, 0);
+    delay(500);
+    arduboyCore.setRGBled(0, 255, 0);    // green is not there ???
+    delay(500);
+    arduboyCore.setRGBled(0, 0, 255);
+    delay(500);
+    arduboyCore.setRGBled(0, 0, 0);
+  }
+  else if ( c == 2 )
+  {
+    u8x8.clear();
+    for(;;)
+    {
+      u8x8.drawUTF8(0, 0, "Button Test");
+      b = arduboyCore.buttonsState();
+      
+      u8x8.noInverse();
+      if ( b & A_BUTTON )
+        u8x8.inverse();
+      u8x8.drawUTF8(0, 1, "A Button");
+      
+      u8x8.noInverse();
+      if ( b & B_BUTTON )
+        u8x8.inverse();
+      u8x8.drawUTF8(0, 2, "B Button");
+
+      u8x8.noInverse();
+      if ( b & UP_BUTTON )
+        u8x8.inverse();
+      u8x8.drawUTF8(0, 3, "UP Button");
+
+      u8x8.noInverse();
+      if ( b & DOWN_BUTTON )
+        u8x8.inverse();
+      u8x8.drawUTF8(0, 4, "DOWN Button");
+
+      u8x8.noInverse();
+      if ( b & LEFT_BUTTON )
+        u8x8.inverse();
+      u8x8.drawUTF8(0, 5, "LEFT Button");
+
+      u8x8.noInverse();
+      if ( b & RIGHT_BUTTON )
+        u8x8.inverse();
+      u8x8.drawUTF8(0, 6, "RIGHT Button");
+
+      u8x8.noInverse();
+      u8x8.drawUTF8(0, 7, "Quit: A&B Button");
+
+      if ( (b & A_BUTTON) &&  (b & B_BUTTON) )
+        break;
+    }
+  }
+  else if ( c == 3 )
+  {
+    u8x8.clear();
+    u8x8.drawUTF8(0, 0, "Speaker Test");
+    arduboyTunes.tone(1000, 1000);
+    delay(1000);
+    arduboyTunes.tone(2000, 1000);
+    delay(1000);
+  }
+}