diff --git a/reflow_plate_fw/include/Setup202_SSD1351_128.h b/reflow_plate_fw/include/Setup202_SSD1351_128.h
new file mode 100644
index 0000000..7b74204
--- /dev/null
+++ b/reflow_plate_fw/include/Setup202_SSD1351_128.h
@@ -0,0 +1,47 @@
+// See SetupX_Template.h for all options available
+
+#define SSD1351_DRIVER
+
+
+#define TFT_WIDTH  128
+#define TFT_HEIGHT 128
+
+#define STM32
+#define TFT_SPI_PORT 1
+
+#define SSD1351_1DOT5_INCH_128 // For 128 x 128 display
+
+// Wiring:
+//   +-------------+------------+-------------------------------------------------------------------+
+//   | Display PCB |  TFT_eSPI  |                               Info                                |
+//   +-------------+------------+-------------------------------------------------------------------+
+//   | GND         | GND (0V)   | Common                                                            |
+//   | VCC         | 5V or 3.3V | Better to power with 5V if display PCB supports it                |
+//   | DIN         | TFT_MOSI   | SPI data                                                          |
+//   | SCK         | TFT_SCLK   | SPI clock                                                         |
+//   | DC          | TFT_DC     | Distinguish between a command or its data                         |
+//   | RST         | TFT_RST    | Hardware reset, can connect to MCU RST pin as well                |
+//   | CS          | TFT_CS     | Chip select, Set to -1 if for manually use with multiple displays |
+//   +-------------+------------+-------------------------------------------------------------------+
+
+//#define TFT_MOSI PA7
+//#define TFT_SCLK PA5
+#define TFT_DC   PB1
+#define TFT_RST  PA12
+#define TFT_CS   PB0
+
+
+
+#define LOAD_GLCD   // Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts- 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+#define SMOOTH_FONT
+
+
+#define SPI_FREQUENCY  20000000
+//#define SPI_FREQUENCY  40000000 // Works after shielding the wires!