evDash/RELEASENOTES.md

RELEASE NOTES

DEV

• m5stack mute speaker
• settings v4 (wifi/gprs/sdcard/ntp/..)
• ble4 skipped if mac is not set (00:00:00:00:00:00)

v2.0.0 2020-12-02

• Project renamed from eNiroDashboard to evDash

v1.9.0 2020-11-30

• Refactoring (classes)
• SIM800L (m5stack) code from https://github.com/kolaCZek

v1.8.3 2020-11-28

• Automatic shutdown when car goes off
• Fixed M5stack speaker noise
• Fixed menu, added scroll support

v1.8.2 2020-11-25

• Removed screen flickering. (via Sprites, esp32 with SRAM is now required!)
• Code cleaning. Removed force no/yes redraw mode. Not required with sprites
• Arrow for current (based on bat.temperature) pre-drawn charging graph

v1.8.1 2020-11-23

• Pre-drawn charging graphs (based on coldgates)
• Show version in menu

v1.8.0 2020-11-20

• Support for new device m5stack core1 iot development kit
• TTGO T4 is still supported device!

v1.7.5 2020-11-17

• Settings: Debug screen off/on
• Settings: LCD brightness (auto, 20, 50, 100%)
• Speed screen: added motor rpm, brake lights indicator
• Soc% to kWh is now calibrated for NiroEV/KonaEV 2020
• eNiroDashboard speed improvements

v1.7.4 2020-11-12

• Added default screen option to settings
• Initial config for Renault ZOE 22kWh
• ODB response analyzer. Please help community to decode unknown values like BMS valves, heater ON switch,... https://docs.google.com/spreadsheets/d/1eT2R8hmsD1hC__9LtnkZ3eDjLcdib9JR-3Myc97jy8M/edit?usp=sharing

v1.7.3 2020-11-11

• Headlights reminder (if drive mode & headlights are off)

v1.7.2 2020-11-10

• improved charging graph

v1.7.1 2020-10-20

• added new screen 1 - auto mode
  • automatically shows screen 3 - speed when speed is >5kph
  • screen 5 chargin graph when power kw > 1kW
• added bat.fan status and fan feedback in Hz for Ioniq

v1.7 2020-09-16

• added support for 39.2kWh Hyundai Kona and Kia e-Niro
• added initial support for Hyundai Ioniq 28kWh (not working yet)

v1.6 2020-06-30

• fixed ble device pairing
• added command to set protocol ISO 15765-4 CAN (11 bit ID, 500 kbit/s) - some vgate adapters freezes during "init at command" phase

v1.5 2020-06-03

• added support for different units (miles, fahrenheits, psi)

v1.4 2020-05-29

• added menu
• Pairing with VGATE iCar Pro BLE4 adapter via menu!
• Installation with flash tool. You don't have to install Arduino and compile sources :)
• New screen 5. Conpumption... Can be used to measure available battery capacity!
• Load/Save settings
• Flip screen vertical option
• Several different improvements

v1.1 2020-04-12

• added new screens (switch via left button)
• screen 0. (blank screen, lcd off)
• screen 1. (default) summary info
• screen 2. speed kmh + kwh/100km (or kw for discharge)
• screen 3. battery cells + battery module temperatures
• screen 4. charging graph
• added low batery temperature detection for slow charging on 50kW DC (15°C) and UFC >70kW (25°C).

v1.0 2020-03-23

• first release
• basic dashboard