update

BoardM5stackCore.cpp

@@ -26,9 +26,7 @@ void BoardM5stackCore::mainLoop() {
 
   Board320_240::mainLoop();
 
-/*#define TFCARD_CS_PIN 4
+/*  if (!SD.begin(TFCARD_CS_PIN, SPI, 27000000)) {
-
-  if (!SD.begin(TFCARD_CS_PIN, SPI, 40000000)) {
     Serial.println("Card Mount Failed");
     return;
   }

BoardM5stackCore.h

@@ -5,7 +5,6 @@
 #define USER_SETUP_LOADED 1
 #define SPI_FREQUENCY  27000000
 #define SPI_TOUCH_FREQUENCY  2500000
-
 #define USER_SETUP_LOADED 1
 #define ILI9341_DRIVER
 #define M5STACK
@@ -19,16 +18,12 @@
 #define SPI_FREQUENCY  27000000
 #define SPI_READ_FREQUENCY  5000000
 #define SPEAKER_PIN 25
+#define TFCARD_CS_PIN 4
 
 #define BUTTON_LEFT 37
 #define BUTTON_MIDDLE 38
 #define BUTTON_RIGHT 39
 
-#define SD_CS    4
-#define SD_MOSI  23
-#define SD_MISO  19
-#define SD_SCLK  18
-
 //
 #include "BoardInterface.h"
 #include "Board320_240.h"

CarKiaEniro.cpp

@@ -14,7 +14,7 @@
 #include <Arduino.h>
 #include <stdint.h>
 #include <WString.h>
-#include <String.h>
+#include <string.h>
 #include <sys/time.h>
 #include "LiveData.h"
 #include "CarKiaEniro.h"

CarRenaultZoe.cpp

@@ -4,7 +4,7 @@
 #include <Arduino.h>
 #include <stdint.h>
 #include <WString.h>
-#include <String.h>
+#include <string.h>
 #include <sys/time.h>
 #include "LiveData.h"
 #include "CarRenaultZoe.h"

INSTALLATION.md

@@ -12,16 +12,23 @@ https://docs.google.com/document/d/1nEezrtXY-8X6mQ1hiZVWDjBVse1sXQg1SlnizaRmJwU/
 
 ## Installation from sources
 - install arduino IDE + ESP32 support
-- https://github.com/Bodmer/TFT_eSPI  - display library
+
-- Configure TFT eSPI
+Required libraries
-  W:\Documents\Arduino\libraries\TFT_eSP\User_Setup_Select.h  
+
+- ArduinoJson
+- TFT_eSPI
+- ESP32_AnalogWrite
+- esp32-micro-sdcard
+
+Configure TFT eSPI
+
+W:\Documents\Arduino\libraries\TFT_eSP\User_Setup_Select.h  
 ```  
 // Comment
 //#include <User_Setup.h>           // Default setup is root library folder
 // And uncomment
 #include <User_Setups/Setup22_TTGO_T4_v1.3.h>      // Setup file for ESP32 and TTGO T4 version 1.3
 ```  
-
 My configuration
 - Board ESP32 Dev module
 - Upload speed 921600

LiveData.h

@@ -5,7 +5,7 @@
 #include <Arduino.h>
 #include <stdint.h>
 #include <WString.h>
-#include <String.h>
+#include <string.h>
 #include <sys/time.h>
 #include <BLEDevice.h>
 #include "config.h"

build.bat

@@ -1,7 +1,7 @@
 
 rem slow GUI performance via arduino-cli yet
 
-arduino-cli compile -v -b esp32:esp32:esp32wrover --build-properties build.extra_flags=-BOARD_TTGO_T4=1 -v evDash.ino
+rem arduino-cli compile -v -b esp32:esp32:esp32wrover --build-properties build.extra_flags=-BOARD_TTGO_T4=1 -v evDash.ino
 rem arduino-cli compile -v -b esp32:esp32:esp32:PSRAM=enabled,PartitionScheme=huge_app,CPUFreq=80 --build-properties build.extra_flags=-BOARD_TTGO_T4=1 -v evDash.ino
 rem rduino-cli upload -b esp32:esp32:esp32 -v -p COM6
 
@@ -11,4 +11,8 @@ rem arduino-cli upload -v -b esp32:esp32:m5stack-core-esp32 -p COM9
 rem arduino-cli compile -v -b esp32:esp32:esp32:PSRAM=enabled,PartitionScheme=huge_app,CPUFreq=80 --build-properties build.extra_flags=-BOARD_M5STACK=1 -v evDash.ino
 rem arduino-cli upload -b esp32:esp32:esp32 -v -p COM9
 
+arduino-cli compile -v -b esp32:esp32:esp32wrover  -v evDash.ino
+arduino-cli upload -b esp32:esp32:esp32wrover -v -p COM8
+
+
 pause

flash_linux.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+# Setup
+# 1. Ensure you have Python 2.7 or 3.4+ installed
+# 2. `pip install esptool`
+# 3. `sudo usermod -a -G dialout <USERNAME>`   // log out and log in is required
+
+# Select distribution:
+# TTGO T4
+DIST=./dist/ttgo_t4_v13
+
+# or m5stack
+DIST=./dist/m5stack_core1
+
+# Set USB port
+PORT=/dev/ttyUSB0
+
+esptool.py -p $PORT -b 921600 write_flash  \
+  --flash_mode dio                         \
+  --flash_size detect                      \
+  --flash_freq 80m                         \
+  0xe000 $DIST/boot_app0.bin               \
+  0x1000 $DIST/bootloader_qio_80m.bin      \
+  0x10000 $DIST/evDash.ino.bin             \
+  0x8000 $DIST/evDash.ino.partitions.bin