can

CommInterface.cpp

@@ -25,9 +25,7 @@ void CommInterface::mainLoop() {
       board->customConsoleCommand(response);
       response = response + ch;
       Serial.println(response);
-      if (liveData->bleConnected) {
       executeCommand(response);
-      }
       response = "";
     } else {
       response = response + ch;

CommObd2Ble4.cpp

@@ -354,5 +354,7 @@ void CommObd2Ble4::mainLoop() {
 void CommObd2Ble4::executeCommand(String cmd) {
 
   String tmpStr = cmd + "\r";
+  if (liveData->bleConnected) {
     liveData->pRemoteCharacteristicWrite->writeValue(tmpStr.c_str(), tmpStr.length());
   }
+}

CommObd2Can.cpp

@@ -1,7 +1,7 @@
-#include "CommObd2Can.h"
+#include "CommObd2CAN.h"
 #include "BoardInterface.h"
 #include "LiveData.h"
-#include <mcp_can.h>
+#include <mcp_CAN.h>
 
 /**
    Connect CAN adapter
@@ -10,8 +10,10 @@ void CommObd2Can::connectDevice() {
 
   Serial.println("CAN connectDevice");
 
+  CAN = new MCP_CAN(pinCanCs);
+
   // Initialize MCP2515 running at 16MHz with a baudrate of 500kb/s and the masks and filters disabled.
-  /*  if (CAN.begin(MCP_STDEXT, CAN_500KBPS, MCP_8MHZ) == CAN_OK) {
+  if (CAN->begin(MCP_STDEXT, CAN_500KBPS, MCP_8MHZ) == CAN_OK) {
     Serial.println("MCP2515 Initialized Successfully!");
     board->displayMessage(" > CAN init OK", "");
   } else {
@@ -20,12 +22,12 @@ void CommObd2Can::connectDevice() {
     return;
   }
 
-    CAN.setMode(MCP_NORMAL);                     // Set operation mode to normal so the MCP2515 sends acks to received data.
+  CAN->setMode(MCP_NORMAL);                     // Set operation mode to normal so the MCP2515 sends acks to received data.
   pinMode(pinCanInt, INPUT);                    // Configuring pin for /INT input
 
   // Serve first command (ATZ)
   doNextQueueCommand();
-  */
+
   Serial.println("init_can() done");
 }
 
@@ -51,18 +53,9 @@ void CommObd2Can::scanDevices() {
 void CommObd2Can::mainLoop() {
 
   CommInterface::mainLoop();
-}
 
-/**
+  // Receive
-   Send command to CAN bus
+  /*    byte b = receivePID(0);
-*/
-void CommObd2Can::executeCommand(String cmd) {
-
-  /**
-       Serial.println("BMS 220101");
-    sendPID(0x00, 0x00);
-    delay(delayTxRx);
-    byte b = receivePID(0);
     if (b == 0x10) {
     Serial.println("CONTINUE");
     sendPID(0x01, 0x00);
@@ -71,5 +64,121 @@ void CommObd2Can::executeCommand(String cmd) {
       receivePID(0);
       delay(10);
     }
+  */
+}
+
+/**
+   Send command to CAN bus
+*/
+void CommObd2Can::executeCommand(String cmd) {
+
+  if (cmd.startsWith("AT")) {
+   liveData->canSendNextAtCommand = true;
+    return;
+  }
+
+  // pid
+  /*String atsh = liveData->currentAtshRequest;
+  atsh = atsh.replace(" ", "");
+  atsh = atsh.substring(4); // remove ATSH
+  String tmpCmd = cmd;
+  tmpCmd = tmpCmd.replace(" ", "");
+  sendPID(liveData->hexToDec(liveData->currentAtshRequest, 2, false), tmpCmd);*/
+  //delay(delayTxRx);
+}
+
+/**
+   Send PID
+*/
+void CommObd2Can::sendPID(uint16_t pid, String cmd) {
+
+  unsigned char tmp[8];
+  String tmpStr;
+
+/*  tmp[0] = cmd.length() / 2;
+  for (byte i = 1; i < 8; i++) {
+    tmp[i] = 0x00;
+  }
+  for (byte i = 0; i < 7; i++) {
+    tmpStr = cmd;
+    tmpStr = tmpStr.substring(i * 2, ((i + 1) * 2);
+    if (tmpStr != "") {
+    tmp[i + 1] = liveData->hexToDec(tmpString, 1, false);
+    }
+  }
+
+  byte sndStat = CAN->sendMsgBuf(pid, 0, 8, tmp); // 11 bit
+  //  byte sndStat = CAN->sendMsgBuf(0x7e4, 1, 8, tmp); // 29 bit extended frame
+  if (sndStat == CAN_OK)  {
+    Serial.print("SENT ");
+    for (byte i = 0; i < 8; i++) {
+      sprintf(msgString, " 0x%.2X", tmp[i]);
+      Serial.print(msgString);
+    }
+    Serial.println("");
+  }   else {
+    Serial.print("Error Sending PID2 0x");
   }*/
 }
+
+/**
+   sendFlowControlFrame
+*/
+void CommObd2Can::sendFlowControlFrame() {
+
+  unsigned char tmp[8];
+/*
+  Serial.println("Flow control frame");
+  tmp[0] = 0x30;
+  for (byte i = 1; i < 8; i++) {
+    tmp[i] = 0x00;
+  }
+
+  byte sndStat = CAN->sendMsgBuf(pid, 0, 8, tmp); // 11 bit
+  //  byte sndStat = CAN->sendMsgBuf(0x7e4, 1, 8, tmp); // 29 bit extended frame
+  if (sndStat == CAN_OK)  {
+    Serial.print("SENT ");
+    for (byte i = 0; i < 8; i++) {
+      sprintf(msgString, " 0x%.2X", tmp[i]);
+      Serial.print(msgString);
+    }
+    Serial.println("");
+  }   else {
+    Serial.print("Error Sending PID2 0x");
+  }*/
+}
+
+/**
+ * Receive PID
+ */
+/*byte CommObd2Can::receivePID() {
+
+  if (!digitalRead(CAN_INT))                        // If CAN0_INT pin is low, read receive buffer
+  {
+    Serial.print(" CAN READ ");
+    CAN->readMsgBuf(&rxId, &len, rxBuf);      // Read data: len = data length, buf = data byte(s)
+
+    if ((rxId & 0x80000000) == 0x80000000)    // Determine if ID is standard (11 bits) or extended (29 bits)
+      sprintf(msgString, "Extended ID: 0x%.8lX  DLC: %1d  Data:", (rxId & 0x1FFFFFFF), len);
+    else
+      sprintf(msgString, "Standard ID: 0x%.3lX       DLC: %1d  Data:", rxId, len);
+
+    Serial.print(msgString);
+
+    if ((rxId & 0x40000000) == 0x40000000) {  // Determine if message is a remote request frame.
+      sprintf(msgString, " REMOTE REQUEST FRAME");
+      Serial.print(msgString);
+    } else {
+      for (byte i = 0; i < len; i++) {
+        sprintf(msgString, " 0x%.2X", rxBuf[i]);
+        Serial.print(msgString);
+      }
+    }
+
+    Serial.println();
+  } else {
+    Serial.println(" CAN NOT READ ");
+  }
+  
+  return rxBuf[0];
+}*/

CommObd2Can.h

@@ -8,7 +8,8 @@ class CommObd2Can : public CommInterface {
 
   protected:
     byte pinCanInt = 15;
-    //MCP_CAN CAN(12); // Set CS to pin 10
+    byte pinCanCs = 12;
+    MCP_CAN* CAN;
     long unsigned int rxId;
     unsigned char len = 0;
     unsigned char rxBuf[512];
@@ -20,6 +21,8 @@ class CommObd2Can : public CommInterface {
     void mainLoop() override;
     void executeCommand(String cmd) override;
     //
+    void sendPID(uint16_t pid, String cmd);
+    void sendFlowControlFrame();
     /* void startBleScan();
       bool connectToServer(BLEAddress pAddress);
       bool doNextAtCommand();