diff --git a/Board320_240.cpp b/Board320_240.cpp
index ea340d2..3064358 100644
--- a/Board320_240.cpp
+++ b/Board320_240.cpp
@@ -46,12 +46,14 @@ void Board320_240::afterSetup() {
     loadTestData();
   }
 
-  // Init from parent class
-  syslog->println("BoardInterface::afterSetup");
-  BoardInterface::afterSetup();
+  bool afterSetup = false;
 
   // Check if bard was sleeping
-  if(bootCount > 1) {
+  if (bootCount > 1) {
+    // Init comm device
+    afterSetup = true;
+    BoardInterface::afterSetup();
+    // Wake or continue with sleeping
     afterSleep();
   }
 
@@ -115,26 +117,32 @@ void Board320_240::afterSetup() {
   if (liveData->settings.gprsHwSerialPort <= 2) {
     sim800lSetup();
   }
+
+  // Init comm device
+  if (!afterSetup) {
+    BoardInterface::afterSetup();
+  }
 }
 
 /**
    Go to Sleep for TIME_TO_SLEEP seconds
 */
 void Board320_240::goToSleep() {
+
   //Sleep MCP2515
   commInterface->disconnectDevice();
 
   //Sleep SIM800L
-  if(liveData->params.sim800l_enabled) {
+  if (liveData->params.sim800l_enabled) {
     if (sim800l->isConnectedGPRS()) {
       bool disconnected = sim800l->disconnectGPRS();
-      for(uint8_t i = 0; i < 5 && !disconnected; i++) {
+      for (uint8_t i = 0; i < 5 && !disconnected; i++) {
         delay(1000);
         disconnected = sim800l->disconnectGPRS();
       }
     }
 
-    if(sim800l->getPowerMode() == NORMAL) {
+    if (sim800l->getPowerMode() == NORMAL) {
       sim800l->setPowerMode(SLEEP);
       delay(1000);
     }
@@ -156,16 +164,29 @@ void Board320_240::goToSleep() {
   Iterate thru commands and determine if car is charging or ignition is on
 */
 void Board320_240::afterSleep() {
+
   syslog->println("Waking up from sleep mode!");
 
-  bool firstRun = true;
+  // Wakeup reason
+  esp_sleep_wakeup_cause_t wakeup_reason;
+  wakeup_reason = esp_sleep_get_wakeup_cause();
+  switch (wakeup_reason) {
+    case ESP_SLEEP_WAKEUP_EXT0 : syslog->println("Wakeup caused by external signal using RTC_IO"); break;
+    case ESP_SLEEP_WAKEUP_EXT1 : syslog->println("Wakeup caused by external signal using RTC_CNTL"); break;
+    case ESP_SLEEP_WAKEUP_TIMER : syslog->println("Wakeup caused by timer"); break;
+    case ESP_SLEEP_WAKEUP_TOUCHPAD : syslog->println("Wakeup caused by touchpad"); break;
+    case ESP_SLEEP_WAKEUP_ULP : syslog->println("Wakeup caused by ULP program"); break;
+    default: syslog->printf("Wakeup was not caused by deep sleep: %d\n", wakeup_reason); break;
+  }
 
-  while(liveData->commandQueueIndex -1 > liveData->commandQueueLoopFrom || firstRun) {
-    if(liveData->commandQueueIndex -1 == liveData->commandQueueLoopFrom) {
+  //
+  bool firstRun = true;
+  while (liveData->commandQueueIndex - 1 > liveData->commandQueueLoopFrom || firstRun) {
+    if (liveData->commandQueueIndex - 1 == liveData->commandQueueLoopFrom) {
       firstRun = false;
     }
 
-    if(millis() > 5000) {
+    if (millis() > 5000) {
       syslog->println("Time's up (5s timeout)...");
       goToSleep();
     }
@@ -176,7 +197,7 @@ void Board320_240::afterSleep() {
   if (liveData->params.auxVoltage > 5 && liveData->params.auxVoltage < 12) {
     syslog->println("AuxBATT too low!");
     goToSleep();
-  } else if(!liveData->params.ignitionOn && !liveData->params.chargingOn) {
+  } else if (!liveData->params.ignitionOn && !liveData->params.chargingOn) {
     syslog->println("Not started & Not charging.");
     goToSleep();
   } else {
@@ -1127,25 +1148,25 @@ void Board320_240::menuItemClick() {
       case 3064: liveData->settings.defaultScreen = 4; showParentMenu = true; break;
       case 3065: liveData->settings.defaultScreen = 5; showParentMenu = true; break;
       // SleepMode off/on
-      case MENU_SLEEP_MODE: liveData->settings.sleepModeEnabled = (liveData->settings.sleepModeEnabled == 1) ? 0 : 1; showMenu(); return; break;
-      case MENU_SCREEN_BRIGHTNESS: liveData->settings.lcdBrightness += 20; if (liveData->settings.lcdBrightness > 100) liveData->settings.lcdBrightness = 0;
+      case MENU_SLEEP_MODE:           liveData->settings.sleepModeEnabled = (liveData->settings.sleepModeEnabled == 1) ? 0 : 1; showMenu(); return; break;
+      case MENU_SCREEN_BRIGHTNESS:    liveData->settings.lcdBrightness += 20; if (liveData->settings.lcdBrightness > 100) liveData->settings.lcdBrightness = 0;
         setBrightness((liveData->settings.lcdBrightness == 0) ? 100 : liveData->settings.lcdBrightness); showMenu(); return; break;
       // Pre-drawn charg.graphs off/on
-      case MENU_PREDRAWN_GRAPHS: liveData->settings.predrawnChargingGraphs = (liveData->settings.predrawnChargingGraphs == 1) ? 0 : 1; showMenu(); return; break;
-      case MENU_HEADLIGHTS_REMINDER: liveData->settings.headlightsReminder = (liveData->settings.headlightsReminder == 1) ? 0 : 1; showMenu(); return; break;
-      case MENU_GPRS: liveData->settings.gprsHwSerialPort = (liveData->settings.gprsHwSerialPort == 2) ? 255 : liveData->settings.gprsHwSerialPort + 1; showMenu(); return; break;
-      case MENU_GPS: liveData->settings.gpsHwSerialPort = (liveData->settings.gpsHwSerialPort == 2) ? 255 : liveData->settings.gpsHwSerialPort + 1; showMenu(); return; break;
-      case MENU_SERIAL_CONSOLE: liveData->settings.serialConsolePort = (liveData->settings.serialConsolePort == 0) ? 255 : liveData->settings.serialConsolePort + 1; showMenu(); return; break;
-      case MENU_DEBUG_LEVEL: liveData->settings.debugLevel = (liveData->settings.debugLevel == 3) ? 0 : liveData->settings.debugLevel + 1; syslog->setDebugLevel(liveData->settings.debugLevel); showMenu(); return; break;
+      case MENU_PREDRAWN_GRAPHS:      liveData->settings.predrawnChargingGraphs = (liveData->settings.predrawnChargingGraphs == 1) ? 0 : 1; showMenu(); return; break;
+      case MENU_HEADLIGHTS_REMINDER:  liveData->settings.headlightsReminder = (liveData->settings.headlightsReminder == 1) ? 0 : 1; showMenu(); return; break;
+      case MENU_GPRS:                 liveData->settings.gprsHwSerialPort = (liveData->settings.gprsHwSerialPort == 2) ? 255 : liveData->settings.gprsHwSerialPort + 1; showMenu(); return; break;
+      case MENU_GPS:                  liveData->settings.gpsHwSerialPort = (liveData->settings.gpsHwSerialPort == 2) ? 255 : liveData->settings.gpsHwSerialPort + 1; showMenu(); return; break;
+      case MENU_SERIAL_CONSOLE:       liveData->settings.serialConsolePort = (liveData->settings.serialConsolePort == 0) ? 255 : liveData->settings.serialConsolePort + 1; showMenu(); return; break;
+      case MENU_DEBUG_LEVEL:          liveData->settings.debugLevel = (liveData->settings.debugLevel == 3) ? 0 : liveData->settings.debugLevel + 1; syslog->setDebugLevel(liveData->settings.debugLevel); showMenu(); return; break;
       // Wifi menu
-      case MENU_WIFI_ENABLED: liveData->settings.wifiEnabled = (liveData->settings.wifiEnabled == 1) ? 0 : 1; showMenu(); return; break;
-      case MENU_WIFI_SSID: return; break;
-      case MENU_WIFI_PASSWORD: return; break;
+      case MENU_WIFI_ENABLED:         liveData->settings.wifiEnabled = (liveData->settings.wifiEnabled == 1) ? 0 : 1; showMenu(); return; break;
+      case MENU_WIFI_SSID:            return; break;
+      case MENU_WIFI_PASSWORD:        return; break;
       // Sdcard
-      case MENU_SDCARD_ENABLED:   liveData->settings.sdcardEnabled = (liveData->settings.sdcardEnabled == 1) ? 0 : 1; showMenu(); return; break;
+      case MENU_SDCARD_ENABLED:       liveData->settings.sdcardEnabled = (liveData->settings.sdcardEnabled == 1) ? 0 : 1; showMenu(); return; break;
       case MENU_SDCARD_AUTOSTARTLOG:  liveData->settings.sdcardAutstartLog = (liveData->settings.sdcardAutstartLog == 1) ? 0 : 1; showMenu(); return; break;
       case MENU_SDCARD_MOUNT_STATUS:  sdcardMount(); break;
-      case MENU_SDCARD_REC:      sdcardToggleRecording(); showMenu(); return; break;
+      case MENU_SDCARD_REC:           sdcardToggleRecording(); showMenu(); return; break;
       // Distance
       case 4011: liveData->settings.distanceUnit = 'k'; showParentMenu = true; break;
       case 4012: liveData->settings.distanceUnit = 'm'; showParentMenu = true; break;
@@ -1156,7 +1177,17 @@ void Board320_240::menuItemClick() {
       case 4031: liveData->settings.pressureUnit = 'b'; showParentMenu = true; break;
       case 4032: liveData->settings.pressureUnit = 'p'; showParentMenu = true; break;
       // Pair ble device
-      case 2: scanDevices = true; liveData->menuCurrent = 9999; commInterface->scanDevices(); return;
+      case 2:
+        if (liveData->settings.commType == COMM_TYPE_OBD2CAN) {
+          displayMessage("Not supported", "in CAN mode");
+          delay(3000);
+          hideMenu();
+          return;
+        }
+        scanDevices = true;
+        liveData->menuCurrent = 9999;
+        commInterface->scanDevices();
+        return;
       // Reset settings
       case 8: resetSettings(); hideMenu(); return;
       // Save settings
@@ -1476,8 +1507,8 @@ void Board320_240::mainLoop() {
     }
   }
 
-  // Turn off display if Ignition is off for more than 10s
-  if(liveData->params.currentTime - liveData->params.lastIgnitionOnTime > 10
+  // Turn off display if Ignition is off for more than 10s, less than month (prevent sleep when gps time is synchronized)
+  if (liveData->params.currentTime - liveData->params.lastIgnitionOnTime > 10 && liveData->params.currentTime - liveData->params.lastIgnitionOnTime < MONTH_SEC
       && liveData->params.lastIgnitionOnTime != 0
       && liveData->settings.sleepModeEnabled) {
     setBrightness(0);
@@ -1485,8 +1516,8 @@ void Board320_240::mainLoop() {
     setBrightness((liveData->settings.lcdBrightness == 0) ? 100 : liveData->settings.lcdBrightness);
   }
 
-  // Go to sleep when car is off for more than 10s and not charging
-  if (liveData->params.currentTime - liveData->params.lastIgnitionOnTime > 10
+  // Go to sleep when car is off for more than 30s and not charging (AC charger is disabled for few seconds when ignition is turned off)
+  if (liveData->params.currentTime - liveData->params.lastIgnitionOnTime > 30 && liveData->params.currentTime - liveData->params.lastIgnitionOnTime < MONTH_SEC
       && !liveData->params.chargingOn
       && liveData->params.lastIgnitionOnTime != 0
       && liveData->settings.sleepModeEnabled)
@@ -1519,12 +1550,10 @@ bool Board320_240::sdcardMount() {
   while (1) {
     syslog->print("Initializing SD card...");
 
-#ifdef BOARD_TTGO_T4
-    syslog->print(" TTGO-T4 ");
-    SPIClass * hspi = new SPIClass(HSPI);
-    spiSD.begin(pinSdcardSclk, pinSdcardMiso, pinSdcardMosi, pinSdcardCs); //SCK,MISO,MOSI,ss
-    SdState = SD.begin(pinSdcardCs, *hspi, SPI_FREQUENCY);
-#endif BOARD_TTGO_T4
+    /*    syslog->print(" TTGO-T4 ");
+        SPIClass * hspi = new SPIClass(HSPI);
+        spiSD.begin(pinSdcardSclk, pinSdcardMiso, pinSdcardMosi, pinSdcardCs); //SCK,MISO,MOSI,ss
+        SdState = SD.begin(pinSdcardCs, *hspi, SPI_FREQUENCY);*/
 
     syslog->print(" M5STACK ");
     SdState = SD.begin(pinSdcardCs);
@@ -1648,9 +1677,9 @@ bool Board320_240::sim800lSetup() {
 
     sim800l->exitSleepMode();
 
-    if(sim800l->getPowerMode() != NORMAL) {
+    if (sim800l->getPowerMode() != NORMAL) {
       syslog->println("SIM800L module in sleep mode - Waking up");
-      if(sim800l->setPowerMode(NORMAL)) {
+      if (sim800l->setPowerMode(NORMAL)) {
         syslog->println("SIM800L in normal power mode");
       } else {
         syslog->println("Failed to switch SIM800L to normal power mode");
diff --git a/BoardInterface.cpp b/BoardInterface.cpp
index c710f78..b7198c4 100644
--- a/BoardInterface.cpp
+++ b/BoardInterface.cpp
@@ -96,7 +96,7 @@ void BoardInterface::loadSettings() {
 
   // Default settings
   liveData->settings.initFlag = 183;
-  liveData->settings.settingsVersion = 5;
+  liveData->settings.settingsVersion = 6;
   liveData->settings.carType = CAR_KIA_ENIRO_2020_64;
   tmpStr = "00:00:00:00:00:00"; // Pair via menu (middle button)
   tmpStr.toCharArray(liveData->settings.obdMacAddress, tmpStr.length() + 1);
@@ -198,7 +198,7 @@ void BoardInterface::loadSettings() {
       if (liveData->tmpSettings.settingsVersion == 5) {
         liveData->tmpSettings.settingsVersion = 6;
         liveData->tmpSettings.serialConsolePort = 0; // hwuart0
-        liveData->tmpSettings.debugLevel = 1; // 1 - debug communication (BLE/CAN)
+        liveData->tmpSettings.debugLevel = 0; // show all
         liveData->tmpSettings.sdcardLogIntervalSec = 2;
         liveData->tmpSettings.gprsLogIntervalSec = 60;
       }
@@ -220,6 +220,8 @@ void BoardInterface::loadSettings() {
 */
 void BoardInterface::afterSetup() {
 
+  syslog->println("BoardInterface::afterSetup");
+
   // Init Comm iterface
   syslog->print("Init communication device: ");
   syslog->println(liveData->settings.commType);
diff --git a/CarHyundaiIoniq.cpp b/CarHyundaiIoniq.cpp
index 8db4c76..d2fad5e 100644
--- a/CarHyundaiIoniq.cpp
+++ b/CarHyundaiIoniq.cpp
@@ -185,6 +185,9 @@ void CarHyundaiIoniq::parseRowMerged() {
 
       tempByte = liveData->hexToDecFromResponse(22, 24, 1, false);
       liveData->params.chargingOn = (bitRead(tempByte, 5) == 1 || bitRead(tempByte, 6) == 1); // bit 5 = AC; bit 6 = DC
+      if(liveData->params.chargingOn) {
+        liveData->params.lastChargingOnTime = liveData->params.currentTime;
+      }
 
       // This is more accurate than min/max from BMS. It's required to detect kona/eniro cold gates (min 15C is needed > 43kW charging, min 25C is needed > 58kW charging)
       liveData->params.batInletC = liveData->hexToDecFromResponse(48, 50, 1, true);
diff --git a/CarKiaEniro.cpp b/CarKiaEniro.cpp
index d33a168..d99e49d 100644
--- a/CarKiaEniro.cpp
+++ b/CarKiaEniro.cpp
@@ -237,6 +237,9 @@ void CarKiaEniro::parseRowMerged() {
       // liveData->params.chargingOn = (bitRead(tempByte, 2) == 1);
       tempByte = liveData->hexToDecFromResponse(24, 26, 1, false);
       liveData->params.chargingOn = (bitRead(tempByte, 5) == 1 || bitRead(tempByte, 6) == 1); // bit 5 = AC; bit 6 = DC
+      if(liveData->params.chargingOn) {
+        liveData->params.lastChargingOnTime = liveData->params.currentTime;
+      }
    
       // This is more accurate than min/max from BMS. It's required to detect kona/eniro cold gates (min 15C is needed > 43kW charging, min 25C is needed > 58kW charging)
       liveData->params.batMinC = liveData->params.batMaxC = liveData->params.batModuleTempC[0];
diff --git a/README.md b/README.md
index 2331202..51c9af5 100644
--- a/README.md
+++ b/README.md
@@ -6,17 +6,12 @@ Supported devices
 
 Working only with electric vehicles 
 Kia e-NIRO (EV), Hyundai Kona EV, Hyundai Ioniq EV, Kia Niro Phev 8.9kWh
-Vgate iCar Pro Bluetooth 4.0 (BLE4) OBD2 adapter is required. See Release notes, quick installation via flash tool bellow. 
+Vgate iCar Pro Bluetooth 4.0 (BLE4) OBD2 adapter is required or CAN (m5 COMMU module).
+See Release notes, quick installation via flash tool bellow. 
 
 Use it at your own risk!
-Author: nick.n17@gmail.com (Lubos Petrovic / Slovakia)
 
-## Supporting me
-
-- Buy Me a Beer via paypal https://www.paypal.me/nickn17
-- EU companies can support me via IBAN/Invoice (my company is non-VAT payer in Slovakia).
-
-Many thanks to Blas, Jens, Калин, Aleš Dokupil and others for help. Thank you for supporting me. 
+evDash Discord server: https://discord.gg/rfAvH7xzTr
 
 ## Required hardware
 Board
@@ -55,15 +50,19 @@ See INSTALLATION.md
 
 Screen list
 - no0. blank screen, lcd off
-- no1. auto mode (summary info / speed kmh / charging graph)
-- no2. summary info (default)
-- no3. speed kmh + kwh/100km (or kw for discharge)
+- no1. automatic mode (summary info / speed kmh / charging graph)
+- no2. summary info
+- no3. speed kmh + kwh/100km
 - no4. battery cells + battery module temperatures
 - no5. charging graph
-- no6. consumption table. Can be used to measure available battery capacity! 
-- no7. debug screen (default off in the menu)
+- no6. consumption table. Can be used to measure available battery capacity.
 
-![image](https://github.com/nickn17/evDash/blob/master/screenshots/v1.jpg)
+![image](https://github.com/nickn17/evDash/blob/master/screenshots/v2.jpg)
+![image](https://github.com/nickn17/evDash/blob/master/screenshots/v2_m5charging2.jpg)
 
-[![Watch the video](https://github.com/nickn17/evDash/blob/master/screenshots/v0.9.jpg)](https://www.youtube.com/watch?v=Jg5VP2P58Yg&)
+## Supporting me
+
+- nick.n17@gmail.com (Lubos Petrovic / Slovakia)
+- Buy Me a Beer via paypal https://www.paypal.me/nickn17
+- Many thanks to all evDash contributors.
 
diff --git a/RELEASENOTES.md b/RELEASENOTES.md
index f79447e..d465ee7 100644
--- a/RELEASENOTES.md
+++ b/RELEASENOTES.md
@@ -1,9 +1,20 @@
 # RELEASE NOTES
 
 ### Next version
-- removed debug screen
-- sdcard working only with m5stack
-- M5 COMMU (CAN) module support.
+
+### v2.2.0 2020-12-29
+- Direct CAN support with m5 COMMU module (instead obd2 BLE4 adapter). RECOMMENDED
+- EvDash deep sleep & wake up for Hyundai Ioniq/Kona & Kia e-Niro (kolaCZek).
+- Send data via GPRS to own server (kolaCZek). Simple web api project https://github.com/kolaCZek/evDash_serverapi)
+- Better support for Hyundai Ioniq (kolaCZek).
+- Kia e-niro - added support for open doors/hood/trunk.
+- Serial console off/on and improved logging & debug level setting
+- Avoid GPS on UART0 collision with serial console.
+- DEV initial support for Bmw i3 (Janulo)
+- Command queue refactoring (Janulo)
+- Sdcard is working only with m5stack
+- Removed debug screen
+- M5 mute speaker fix
 
 ### v2.1.1 2020-12-14
 - tech refactoring: `hexToDecFromResponse`, `decFromResponse`
diff --git a/config.h b/config.h
index bb68689..3c145c6 100644
--- a/config.h
+++ b/config.h
@@ -2,8 +2,8 @@
 
 #include <BLEDevice.h>
 
-#define APP_VERSION "v2.2.0-dev"
-#define APP_RELEASE_DATE "2020-12-14"
+#define APP_VERSION "v2.2.0"
+#define APP_RELEASE_DATE "2020-12-29"
 
 // TFT COLORS FOR TTGO
 #define TFT_BLACK       0x0000      /*   0,   0,   0 */
diff --git a/dist/m5stack_core1/evDash.ino.bin b/dist/m5stack_core1/evDash.ino.bin
index deff462..b64dbec 100644
Binary files a/dist/m5stack_core1/evDash.ino.bin and b/dist/m5stack_core1/evDash.ino.bin differ
diff --git a/dist/ttgo_t4_v13/evDash.ino.bin b/dist/ttgo_t4_v13/evDash.ino.bin
index 45e88e8..bb9b62b 100644
Binary files a/dist/ttgo_t4_v13/evDash.ino.bin and b/dist/ttgo_t4_v13/evDash.ino.bin differ
diff --git a/menu.h b/menu.h
index 00b0ee5..2a482da 100644
--- a/menu.h
+++ b/menu.h
@@ -29,7 +29,7 @@ MENU_ITEM menuItemsSource[100] = {
   {MENU_ADAPTER_BLE4-1, MENU_ADAPTER_TYPE, 0, "<- parent menu"},
   {MENU_ADAPTER_BLE4, MENU_ADAPTER_TYPE, -1, "Bluetooth 4 (BLE4)"},
   {MENU_ADAPTER_CAN, MENU_ADAPTER_TYPE, -1,  "CAN bus (MCP2515-1/SO)"},
-  {MENU_ADAPTER_BT3, MENU_ADAPTER_TYPE, -1,  "Bluetooth 3 (dev)"},
+  //{MENU_ADAPTER_BT3, MENU_ADAPTER_TYPE, -1,  "Bluetooth 3 (dev)"},
   
   {300, 3, 0, "<- parent menu"},
   // {MENU_WIFI, 3, -1, "[dev] WiFi network"},
@@ -47,19 +47,6 @@ MENU_ITEM menuItemsSource[100] = {
   {MENU_HEADLIGHTS_REMINDER, 3, -1, "Headlight reminder"},
   {MENU_SLEEP_MODE, 3, -1, "SleepMode"},
   
-/*
-  // NTP
-  byte ntpEnabled; // 0/1 
-  byte ntpTimezone;
-  byte ntpDaySaveTime; // 0/1
-  // GPRS SIM800L 
-  byte gprsEnabled; // 0/1 
-  char gprsApn[64];
-  // Remote upload
-  byte remoteUploadEnabled; // 0/1 
-  char remoteApiUrl[64];
-  char remoteApiKey[32];*/
-
   {400, 4, 0, "<- parent menu"},
   {MENU_DISTANCE_UNIT, 4, -1, "Distance"},
   {MENU_TEMPERATURE_UNIT, 4, -1, "Temperature"},
@@ -75,7 +62,7 @@ MENU_ITEM menuItemsSource[100] = {
   {MENU_SDCARD_AUTOSTARTLOG, MENU_SDCARD, -1, "Autostart log enabled"},
   {MENU_SDCARD_MOUNT_STATUS, MENU_SDCARD, -1, "Status"},
   {MENU_SDCARD_REC, MENU_SDCARD, -1, "Record"},
-  {MENU_SDCARD_INTERVAL, MENU_SDCARD, -1, "Log interval sec."},
+  //{MENU_SDCARD_INTERVAL, MENU_SDCARD, -1, "Log interval sec."},
   
   {3060, 306, 3, "<- parent menu"},
   {3061, 306, -1, "Auto mode"},
diff --git a/screenshots/v2.jpg b/screenshots/v2.jpg
new file mode 100644
index 0000000..d86a39f
Binary files /dev/null and b/screenshots/v2.jpg differ
diff --git a/screenshots/v2_m5charging2.jpg b/screenshots/v2_m5charging2.jpg
new file mode 100644
index 0000000..4083beb
Binary files /dev/null and b/screenshots/v2_m5charging2.jpg differ
diff --git a/screenshots/v2_m5speed.jpg b/screenshots/v2_m5speed.jpg
new file mode 100644
index 0000000..a28e9d8
Binary files /dev/null and b/screenshots/v2_m5speed.jpg differ