esp32 + ota + doublereset
This commit is contained in:
2
FW/NCM107-ESP32C3/lib/nixie/NCM107_component.h
Normal file
2
FW/NCM107-ESP32C3/lib/nixie/NCM107_component.h
Normal file
@@ -0,0 +1,2 @@
|
||||
#include "esphome.h"
|
||||
|
||||
@@ -1,19 +1,23 @@
|
||||
Anode0Pin 5=PD5= PIN 11 (ANT0) ==> GPIO10
|
||||
Anode1Pin 7=PD7= PIN 13 (ANT1) ==> GPIO3
|
||||
Anode2Pin 8=PB0= PIN 14 (ANT2) ==> GPIO8
|
||||
Anode0Pin 5=PD5= PIN 11 (ANT0) ==> GPIO5 gr - ok
|
||||
Anode1Pin 7=PD7= PIN 13 (ANT1) ==> GPIO13 gr - ok
|
||||
Anode2Pin 8=PB0= PIN 14 (ANT2) ==> GPIO17 gr - ok
|
||||
|
||||
LEpin=10=PB2= PIN 16 (LE) ==> GPIO7
|
||||
LEpin=10=PB2= PIN 16 (LE) ==> GPIO22 gr - ok
|
||||
|
||||
MOSI=PB3 PIN 17 (MOSI) ==> GPIO6
|
||||
SCK=PB5 PIN 19 (SCK) ==> GPIO5
|
||||
MOSI=PB3 PIN 17 (MOSI) ==> GPIO23 gr - ok
|
||||
SCK=PB5 PIN 19 (SCK) ==> GPIO18 gr - ok
|
||||
|
||||
SDA=PC4 PIN 27 (SDA) ==> GPIO0
|
||||
SCL=PC5 PIN 28 (SCL) ==> GPIO1
|
||||
SDA=PC4 PIN 27 (SDA) ==> x
|
||||
SCL=PC5 PIN 28 (SCL) ==> x
|
||||
|
||||
MODE=A0 =PC0 PIN 23 (SW1) ==> x
|
||||
DOWN=A1 =PC1 PIN 24 (SW2) ==> GPIO4
|
||||
UP=A2 =PC2 PIN 25 (SW3) ==> GPIO2
|
||||
MODE=A0 =PC0 PIN 23 (SW1) ==> GPIO16 pa - ok
|
||||
DOWN=A1 =PC1 PIN 24 (SW2) ==> GPIO4 pa - ok
|
||||
UP=A2 =PC2 PIN 25 (SW3) ==> GPIO2 pa - ok
|
||||
|
||||
LEDR=9=PB1 PIN 15 (PWM2) x
|
||||
LEDG=6=PD6 PIN 12 (PWM1) x
|
||||
LEDB=3=PD3. PIN 5 (PWM3) x
|
||||
LEDR=9=PB1 PIN 15 (PWM2) ==> GPIO25 ye - ok
|
||||
LEDG=6=PD6 PIN 12 (PWM1) ==> GPIO26 ye - ok
|
||||
LEDB=3=PD3 PIN 5 (PWM3) ==> GPIO27 ye - ok
|
||||
|
||||
|
||||
GND pin 8 ok
|
||||
VCC PIN 7 ok
|
||||
|
||||
@@ -8,16 +8,19 @@
|
||||
; Please visit documentation for the other options and examples
|
||||
; https://docs.platformio.org/page/projectconf.html
|
||||
|
||||
[env:seeed_xiao_esp32c3]
|
||||
[env:esp32]
|
||||
platform = espressif32
|
||||
board = seeed_xiao_esp32c3
|
||||
board = esp32dev
|
||||
framework = arduino
|
||||
monitor_speed = 115200
|
||||
lib_deps =
|
||||
paulstoffregen/Time@^1.6.1
|
||||
jchristensen/Timezone@^1.2.4
|
||||
ESPNtpClient
|
||||
build_src_filter = ${env.build_src_filter}
|
||||
khoih-prog/ESP_WifiManager@^1.12.1
|
||||
LittleFS
|
||||
#jandrassy/ArduinoOTA@^1.0.11
|
||||
lib_ldf_mode = deep+
|
||||
build_flags =
|
||||
-DCORE_DEBUG_LEVEL=3
|
||||
-DNDEF_DEBUG=1
|
||||
upload_protocol = espota
|
||||
upload_port = nixie_clock.local
|
||||
@@ -1,17 +1,14 @@
|
||||
#include "clock.h"
|
||||
|
||||
bool RTC_present;
|
||||
bool NTPinit = false;
|
||||
// Central European Time (Frankfurt, Paris)
|
||||
bool RTC_present = false;
|
||||
bool provider_Set = false;
|
||||
// // Central European Time (Frankfurt, Paris)
|
||||
TimeChangeRule CEST = {"CEST", Last, Sun, Mar, 2, 120}; // Central European Summer Time
|
||||
TimeChangeRule CET = {"CET ", Last, Sun, Oct, 3, 60}; // Central European Standard Time
|
||||
Timezone myTZ(CEST, CET);
|
||||
|
||||
TimeChangeRule *tcr;
|
||||
|
||||
|
||||
|
||||
|
||||
bool timeIsSet()
|
||||
{
|
||||
return RTC_present;
|
||||
@@ -29,31 +26,34 @@ void printDateTime(time_t t, const char *tz)
|
||||
|
||||
time_t getLocalTime()
|
||||
{
|
||||
if(!getWifiStatus) return 0;
|
||||
time_t utc = getNtpTime();
|
||||
if(!getWifiStatus()) return 0;
|
||||
time_t utc;
|
||||
time(&utc);
|
||||
time_t local = myTZ.toLocal(utc, &tcr);
|
||||
printDateTime(local,tcr -> abbrev);
|
||||
printDateTime(utc,"UTC");
|
||||
|
||||
return utc;
|
||||
return local;
|
||||
}
|
||||
|
||||
void initClock()
|
||||
{
|
||||
initWifi();
|
||||
getLocalTime();
|
||||
}
|
||||
|
||||
|
||||
void loopClock()
|
||||
{
|
||||
if(getWifiStatus())
|
||||
if(getWifiStatus())
|
||||
{
|
||||
if(!NTPinit && getWifiStatus())
|
||||
if(getWifiStatus() & !provider_Set)
|
||||
{
|
||||
initNTP();
|
||||
setSyncProvider(getLocalTime);
|
||||
setSyncInterval(300);
|
||||
NTPinit = true;
|
||||
setSyncInterval(10);
|
||||
provider_Set = true;
|
||||
log_i("timesync provider set");
|
||||
}
|
||||
|
||||
RTC_present = timeStatus ? timeSet: true, false;
|
||||
}
|
||||
else
|
||||
|
||||
@@ -1,17 +1,12 @@
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "ntp.h"
|
||||
#include "TimeLib.h"
|
||||
#include "connection.h"
|
||||
#include "util.h"
|
||||
#include <Timezone.h> // https://github.com/JChristensen/Timezone
|
||||
#include <ESPNtpClient.h>
|
||||
|
||||
|
||||
|
||||
void initClock();
|
||||
void loopClock();
|
||||
String getTimeNow();
|
||||
String updateDateString();
|
||||
// bool isValidDate();
|
||||
bool timeIsSet();
|
||||
16
FW/NCM107-ESP32C3/src/connection.cpp
Normal file
16
FW/NCM107-ESP32C3/src/connection.cpp
Normal file
@@ -0,0 +1,16 @@
|
||||
#include "connection.h"
|
||||
|
||||
bool printed = false;
|
||||
bool wifiConnected = false;
|
||||
|
||||
bool getWifiStatus()
|
||||
{
|
||||
wifiConnected = WiFi.status() == WL_CONNECTED;
|
||||
|
||||
if(!printed && wifiConnected)
|
||||
{
|
||||
log_i("IP number assigned by DHCP is %s",WiFi.localIP());
|
||||
printed = true;
|
||||
}
|
||||
return wifiConnected;
|
||||
}
|
||||
6
FW/NCM107-ESP32C3/src/connection.h
Normal file
6
FW/NCM107-ESP32C3/src/connection.h
Normal file
@@ -0,0 +1,6 @@
|
||||
#pragma once
|
||||
#include "Arduino.h"
|
||||
#include <WiFi.h>
|
||||
|
||||
bool getWifiStatus();
|
||||
|
||||
41
FW/NCM107-ESP32C3/src/defines.h
Normal file
41
FW/NCM107-ESP32C3/src/defines.h
Normal file
@@ -0,0 +1,41 @@
|
||||
#pragma once
|
||||
|
||||
|
||||
#define Anode0Pin 5
|
||||
#define Anode1Pin 13
|
||||
#define Anode2Pin 17
|
||||
#define mosiPin 23
|
||||
#define misoPin 19
|
||||
#define sckPin 18
|
||||
#define LEpin 22
|
||||
#define upPin 2
|
||||
#define downPin 4
|
||||
#define modePin 16
|
||||
#define ledRPin 25
|
||||
#define ledGPin 26
|
||||
#define ledBPin 27
|
||||
|
||||
#define Anode0ON digitalWrite(Anode0Pin,HIGH)
|
||||
#define Anode0OFF digitalWrite(Anode0Pin,LOW)
|
||||
|
||||
#define Anode1ON digitalWrite(Anode1Pin,HIGH)
|
||||
#define Anode1OFF digitalWrite(Anode1Pin,LOW)
|
||||
|
||||
#define Anode2ON digitalWrite(Anode2Pin,HIGH)
|
||||
#define Anode2OFF digitalWrite(Anode2Pin,LOW)
|
||||
|
||||
#define TimeIndex 0
|
||||
#define DateIndex 1
|
||||
// #define AlarmIndex 2
|
||||
// #define hModeIndex 3
|
||||
// #define TimeHoursIndex 4
|
||||
// #define TimeMintuesIndex 5
|
||||
// #define TimeSecondsIndex 6
|
||||
// #define DateDayIndex 7
|
||||
// #define DateMonthIndex 8
|
||||
// #define DateYearIndex 9
|
||||
// #define AlarmHourIndex 10
|
||||
// #define AlarmMinuteIndex 11
|
||||
// #define AlarmSecondIndex 12
|
||||
// #define Alarm01 13
|
||||
// #define hModeValueIndex 14
|
||||
@@ -1,83 +1,9 @@
|
||||
#include <Arduino.h>
|
||||
#include "clock.h"
|
||||
|
||||
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
|
||||
#define Anode0Pin 10
|
||||
#define Anode1Pin 3
|
||||
#define Anode2Pin 8
|
||||
|
||||
#define Anode0ON digitalWrite(Anode0Pin,HIGH)
|
||||
#define Anode0OFF digitalWrite(Anode0Pin,LOW)
|
||||
|
||||
#define Anode1ON digitalWrite(Anode1Pin,HIGH)
|
||||
#define Anode1OFF digitalWrite(Anode1Pin,LOW)
|
||||
|
||||
#define Anode2ON digitalWrite(Anode2Pin,HIGH)
|
||||
#define Anode2OFF digitalWrite(Anode2Pin,LOW)
|
||||
|
||||
#define mosiPin 5
|
||||
#define misoPin 9
|
||||
#define sckPin 6
|
||||
#define LEpin 7
|
||||
|
||||
#define TimeIndex 0
|
||||
#define DateIndex 1
|
||||
// #define AlarmIndex 2
|
||||
// #define hModeIndex 3
|
||||
// #define TimeHoursIndex 4
|
||||
// #define TimeMintuesIndex 5
|
||||
// #define TimeSecondsIndex 6
|
||||
// #define DateDayIndex 7
|
||||
// #define DateMonthIndex 8
|
||||
// #define DateYearIndex 9
|
||||
// #define AlarmHourIndex 10
|
||||
// #define AlarmMinuteIndex 11
|
||||
// #define AlarmSecondIndex 12
|
||||
// #define Alarm01 13
|
||||
// #define hModeValueIndex 14
|
||||
|
||||
String updateDateString();
|
||||
String updateDisplayString();
|
||||
// void doDotBlink();
|
||||
// void checkAlarmTime();
|
||||
// String PreZero(int digit);
|
||||
word doEditBlink(int pos);
|
||||
// byte decToBcd(byte val);
|
||||
String antiPoisoning2(String fromStr, String toStr);
|
||||
// String getTimeNow();
|
||||
String antiPoisoning2(String fromStr, String toStr);
|
||||
bool doTest();
|
||||
// void getRTCTime();
|
||||
void modesChanger();
|
||||
void doIndication();
|
||||
|
||||
const word fpsLimit=16666; // 1/60*1.000.000 //limit maximum refresh rate on 60 fps
|
||||
|
||||
String stringToDisplay="000000";// Conten of this string will be displayed on tubes (must be 6 chars length)
|
||||
int menuPosition=0; // 0 - time
|
||||
// 1 - date
|
||||
// 2 - alarm
|
||||
// 3 - 12/24 hours mode
|
||||
|
||||
|
||||
// 0 1 2 3 4 5 6 7 8 9
|
||||
//word SymbolArray[10]={65534, 65533, 65531, 65527, 65519, 65503, 65471, 65407, 65279, 65023};
|
||||
word SymbolArray[10]={1022, 1021, 1019, 1015, 1007, 991, 959, 895, 767, 511};
|
||||
|
||||
byte dotPattern=B00000000; //bit mask for separeting dots
|
||||
//B00000000 - turn off up and down dots
|
||||
//B1100000 - turn off all dots
|
||||
|
||||
|
||||
|
||||
int teststate = -1;
|
||||
String testStringArray[12]={"000000","111111","222222","333333","444444","555555","666666","777777","888888","999999","",""};
|
||||
unsigned long startOfTest;
|
||||
|
||||
|
||||
#include "defines.h"
|
||||
#include "wifimanager.h"
|
||||
#include "tubes.h"
|
||||
#include "ota.h"
|
||||
|
||||
/*******************************************************************************************************
|
||||
Init Programm
|
||||
@@ -88,252 +14,34 @@ void setup()
|
||||
Serial.begin(115200);
|
||||
|
||||
log_i("init hardware");
|
||||
initTubes();
|
||||
|
||||
pinMode(LEpin, OUTPUT);
|
||||
pinMode(ledRPin, OUTPUT);
|
||||
pinMode(ledGPin, OUTPUT);
|
||||
pinMode(ledBPin, OUTPUT);
|
||||
|
||||
// SPI setup
|
||||
SPI.begin(mosiPin,misoPin,sckPin); //
|
||||
SPI.setDataMode (SPI_MODE3); // Mode 3 SPI
|
||||
SPI.setClockDivider(SPI_CLOCK_DIV128); // SCK = 16MHz/128= 125kHz
|
||||
|
||||
pinMode(Anode0Pin, OUTPUT);
|
||||
pinMode(Anode1Pin, OUTPUT);
|
||||
pinMode(Anode2Pin, OUTPUT);
|
||||
digitalWrite(ledRPin, 0);
|
||||
digitalWrite(ledGPin, 0);
|
||||
digitalWrite(ledBPin, 0);
|
||||
|
||||
log_i("init clock");
|
||||
setupwifiman();
|
||||
initClock();
|
||||
initOTA();
|
||||
|
||||
//!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
while(!timeIsSet())
|
||||
{
|
||||
doTest();
|
||||
loopClock();
|
||||
}
|
||||
|
||||
log_i("init done, GO!");
|
||||
|
||||
//!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
//antipoisoning transaction
|
||||
bool modeChangedByUser=false;
|
||||
bool transactionInProgress=false;
|
||||
#define timeModePeriod 60000
|
||||
#define dateModePeriod 5000
|
||||
long modesChangePeriod=timeModePeriod;
|
||||
//antipoisoning end
|
||||
|
||||
/***************************************************************************************************************
|
||||
MAIN Programm
|
||||
***************************************************************************************************************/
|
||||
void loop() {
|
||||
|
||||
loopClock();
|
||||
|
||||
if ((menuPosition==TimeIndex) || (modeChangedByUser==false) ) modesChanger();
|
||||
doIndication();
|
||||
|
||||
static bool updateDateTime=false;
|
||||
switch (menuPosition)
|
||||
{
|
||||
case TimeIndex: //time mode
|
||||
if (!transactionInProgress) stringToDisplay=updateDisplayString();
|
||||
break;
|
||||
case DateIndex: //date mode
|
||||
if (!transactionInProgress) stringToDisplay=updateDateString();
|
||||
dotPattern=B01000000;//turn on lower dots
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
int dlay=500;
|
||||
// bool test=1;
|
||||
byte strIndex=-1;
|
||||
// bool digitsLock=false;
|
||||
|
||||
bool doTest()
|
||||
{
|
||||
if(!timeIsSet()) return true;
|
||||
|
||||
if(teststate == -1)
|
||||
{
|
||||
Serial.println(F("Start Test"));
|
||||
startOfTest=millis();
|
||||
teststate = 0;
|
||||
Serial.println(testStringArray[10]);
|
||||
}
|
||||
|
||||
// byte b=1;
|
||||
|
||||
if ((millis()-startOfTest)>dlay)
|
||||
{
|
||||
startOfTest=millis();
|
||||
strIndex=strIndex+1;
|
||||
if (strIndex==10) dlay=3000;
|
||||
|
||||
stringToDisplay=testStringArray[strIndex];
|
||||
Serial.print("stringToDisplay=");
|
||||
Serial.println(stringToDisplay);
|
||||
Serial.print("strIndex=");
|
||||
Serial.println(strIndex);
|
||||
Serial.print("i=");
|
||||
Serial.println(teststate);
|
||||
|
||||
if (strIndex==11) strIndex = -1;
|
||||
|
||||
}
|
||||
|
||||
doIndication();
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
void doIndication()
|
||||
{
|
||||
static byte b=1;
|
||||
|
||||
static unsigned long lastTimeInterval1Started;
|
||||
if ((micros()-lastTimeInterval1Started)>5000)
|
||||
{
|
||||
lastTimeInterval1Started=micros();
|
||||
Anode0OFF; Anode1OFF; Anode2OFF;
|
||||
unsigned long var32;
|
||||
unsigned long tmpVar;
|
||||
|
||||
int curTube=b*2-2;
|
||||
var32=SymbolArray[stringToDisplay.substring(curTube, curTube+1).toInt()];
|
||||
tmpVar=SymbolArray[stringToDisplay.substring(curTube+1, curTube+2).toInt()];
|
||||
|
||||
var32 |= tmpVar<<10;
|
||||
|
||||
digitalWrite(LEpin, LOW); // allow data input (Transparent mode)
|
||||
|
||||
SPI.transfer(var32>>16); //[A3][A2][A1][A0][RC9][RC8][RC7][RC6] - A5-A0 - anodes
|
||||
SPI.transfer(var32>>8); //[RC5][RC4][RC3][RC2][RC1][RC0][LC9][RC8] - RC9-RC0 - Right tubes cathodes
|
||||
SPI.transfer(var32);
|
||||
|
||||
digitalWrite(LEpin, HIGH); // latching data
|
||||
|
||||
switch (b)
|
||||
{
|
||||
case 1:{Anode0ON; Anode1OFF; Anode2OFF; break;};
|
||||
case 2:{Anode0OFF; Anode1ON; Anode2OFF; break;};
|
||||
case 3:{Anode0OFF; Anode1OFF; Anode2ON; break;};
|
||||
}
|
||||
b=b+1;
|
||||
if (b==4) {b=1;}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void doDotBlink()
|
||||
{
|
||||
static unsigned long lastTimeBlink=millis();
|
||||
static bool dotState=0;
|
||||
if ((millis()-lastTimeBlink)>1000)
|
||||
{
|
||||
lastTimeBlink=millis();
|
||||
dotState=!dotState;
|
||||
if (dotState)
|
||||
{
|
||||
dotPattern=B11000000;
|
||||
/*digitalWrite(pinUpperDots, HIGH);
|
||||
digitalWrite(pinLowerDots, HIGH);*/
|
||||
}
|
||||
else
|
||||
{
|
||||
dotPattern=B00000000;
|
||||
/*digitalWrite(pinUpperDots, LOW);
|
||||
digitalWrite(pinLowerDots, LOW);*/
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
byte decToBcd(byte val){
|
||||
// Convert normal decimal numbers to binary coded decimal
|
||||
return ( (val/10*16) + (val%10) );
|
||||
}
|
||||
|
||||
byte bcdToDec(byte val) {
|
||||
// Convert binary coded decimal to normal decimal numbers
|
||||
return ( (val/16*10) + (val%16) );
|
||||
}
|
||||
|
||||
void modesChanger()
|
||||
{
|
||||
static unsigned long lastTimeModeChanged=millis();
|
||||
static unsigned long lastTimeAntiPoisoningIterate=millis();
|
||||
if ((millis()-lastTimeModeChanged)>modesChangePeriod)
|
||||
{
|
||||
lastTimeModeChanged=millis();
|
||||
if (menuPosition==TimeIndex) {menuPosition=DateIndex; modesChangePeriod=dateModePeriod;}
|
||||
else {menuPosition=TimeIndex; modesChangePeriod=timeModePeriod;}
|
||||
if (modeChangedByUser==true)
|
||||
{
|
||||
menuPosition=TimeIndex;
|
||||
}
|
||||
modeChangedByUser=false;
|
||||
}
|
||||
if ((millis()-lastTimeModeChanged)<2000)
|
||||
{
|
||||
if ((millis()-lastTimeAntiPoisoningIterate)>100)
|
||||
{
|
||||
lastTimeAntiPoisoningIterate=millis();
|
||||
if (menuPosition==TimeIndex)
|
||||
stringToDisplay=antiPoisoning2(updateDateString(), getTimeNow());
|
||||
else stringToDisplay=antiPoisoning2(getTimeNow(), updateDateString());
|
||||
// Serial.println("StrTDInToModeChng="+stringToDisplay);
|
||||
}
|
||||
} else transactionInProgress=false;
|
||||
}
|
||||
|
||||
String antiPoisoning2(String fromStr, String toStr)
|
||||
{
|
||||
//static bool transactionInProgress=false;
|
||||
//byte fromDigits[6];
|
||||
static byte toDigits[6];
|
||||
static byte currentDigits[6];
|
||||
static byte iterationCounter=0;
|
||||
if (!transactionInProgress)
|
||||
{
|
||||
transactionInProgress=true;
|
||||
for (int i=0; i<6; i++)
|
||||
{
|
||||
currentDigits[i]=fromStr.substring(i, i+1).toInt();
|
||||
toDigits[i]=toStr.substring(i, i+1).toInt();
|
||||
}
|
||||
}
|
||||
for (int i=0; i<6; i++)
|
||||
{
|
||||
if (iterationCounter<10) currentDigits[i]++;
|
||||
else if (currentDigits[i]!=toDigits[i]) currentDigits[i]++;
|
||||
if (currentDigits[i]==10) currentDigits[i]=0;
|
||||
}
|
||||
iterationCounter++;
|
||||
if (iterationCounter==20)
|
||||
{
|
||||
iterationCounter=0;
|
||||
transactionInProgress=false;
|
||||
}
|
||||
String tmpStr;
|
||||
for (int i=0; i<6; i++)
|
||||
tmpStr+=currentDigits[i];
|
||||
return tmpStr;
|
||||
}
|
||||
|
||||
String updateDisplayString()
|
||||
{
|
||||
static unsigned long lastTimeStringWasUpdated;
|
||||
if ((millis()-lastTimeStringWasUpdated)>1000)
|
||||
{
|
||||
lastTimeStringWasUpdated=millis();
|
||||
return getTimeNow();
|
||||
}
|
||||
return stringToDisplay;
|
||||
loopTubes();
|
||||
loopOTA();
|
||||
}
|
||||
@@ -1,117 +0,0 @@
|
||||
#include "ntp.h"
|
||||
|
||||
|
||||
static const char ntpServerName[] = "us.pool.ntp.org";
|
||||
// const int timeZone = 2;
|
||||
// unsigned int localPort = 8888; // local port to listen for UDP packets
|
||||
const char *ssid = "iot";
|
||||
const char *password = "Rijnstraat214";
|
||||
// const int NTP_PACKET_SIZE = 48; // NTP time is in the first 48 bytes of message
|
||||
// byte packetBuffer[NTP_PACKET_SIZE]; //buffer to hold incoming & outgoing packets
|
||||
// const unsigned int remotePort = 123;
|
||||
|
||||
bool printed = false;
|
||||
bool wifiConnected = false;
|
||||
|
||||
|
||||
|
||||
// WiFiUDP Udp;
|
||||
|
||||
|
||||
// bool timeUpdated()
|
||||
// {
|
||||
// return _timeupdated;
|
||||
// }
|
||||
|
||||
void initWifi()
|
||||
{
|
||||
log_i("init wifi");
|
||||
WiFi.begin(ssid, password);
|
||||
}
|
||||
|
||||
void initNTP()
|
||||
{
|
||||
log_i("init ntp");
|
||||
NTP.setTimeZone(TZ_Etc_UTC);
|
||||
NTP.begin();
|
||||
// Udp.begin(localPort);
|
||||
}
|
||||
|
||||
bool getWifiStatus()
|
||||
{
|
||||
wifiConnected = WiFi.status() == WL_CONNECTED;
|
||||
|
||||
if(!printed && wifiConnected)
|
||||
{
|
||||
Serial.print("IP number assigned by DHCP is ");
|
||||
Serial.println(WiFi.localIP());
|
||||
printed = true;
|
||||
}
|
||||
return wifiConnected;
|
||||
}
|
||||
|
||||
|
||||
// // send an NTP request to the time server at the given address
|
||||
// void sendNTPpacket(IPAddress &address)
|
||||
// {
|
||||
// // set all bytes in the buffer to 0
|
||||
// memset(packetBuffer, 0, NTP_PACKET_SIZE);
|
||||
// // Initialize values needed to form NTP request
|
||||
// // (see URL above for details on the packets)
|
||||
// packetBuffer[0] = 0b11100011; // LI, Version, Mode
|
||||
// packetBuffer[1] = 0; // Stratum, or type of clock
|
||||
// packetBuffer[2] = 6; // Polling Interval
|
||||
// packetBuffer[3] = 0xEC; // Peer Clock Precision
|
||||
// // 8 bytes of zero for Root Delay & Root Dispersion
|
||||
// packetBuffer[12] = 49;
|
||||
// packetBuffer[13] = 0x4E;
|
||||
// packetBuffer[14] = 49;
|
||||
// packetBuffer[15] = 52;
|
||||
// // all NTP fields have been given values, now
|
||||
// // you can send a packet requesting a timestamp:
|
||||
// Udp.beginPacket(address, 123); // NTP requests are to port 123
|
||||
// Udp.write(packetBuffer, NTP_PACKET_SIZE);
|
||||
// Udp.endPacket();
|
||||
// }
|
||||
|
||||
time_t getNtpTime()
|
||||
{
|
||||
static int last = 0;
|
||||
|
||||
if ((millis () - last) > 1000) {
|
||||
last = millis ();
|
||||
Serial.println (NTP.getTimeDateStringUs ());
|
||||
}
|
||||
|
||||
return NTP.getLastNTPSync();
|
||||
// IPAddress ntpServerIP; // NTP server's ip address
|
||||
|
||||
// while (Udp.parsePacket() > 0)
|
||||
// ; // discard any previously received packets
|
||||
// Serial.println("Transmit NTP Request");
|
||||
// // get a random server from the pool
|
||||
// WiFi.hostByName(ntpServerName, ntpServerIP);
|
||||
// Serial.print(ntpServerName);
|
||||
// Serial.print(": ");
|
||||
// Serial.println(ntpServerIP);
|
||||
// sendNTPpacket(ntpServerIP);
|
||||
// uint32_t beginWait = millis();
|
||||
// while (millis() - beginWait < 3000)
|
||||
// {
|
||||
// int size = Udp.parsePacket();
|
||||
// if (size >= NTP_PACKET_SIZE)
|
||||
// {
|
||||
// Serial.printf("Receive NTP Response in %dms \n",(millis() - beginWait));
|
||||
// Udp.read(packetBuffer, NTP_PACKET_SIZE); // read packet into the buffer
|
||||
// unsigned long secsSince1900;
|
||||
// // convert four bytes starting at location 40 to a long integer
|
||||
// secsSince1900 = (unsigned long)packetBuffer[40] << 24;
|
||||
// secsSince1900 |= (unsigned long)packetBuffer[41] << 16;
|
||||
// secsSince1900 |= (unsigned long)packetBuffer[42] << 8;
|
||||
// secsSince1900 |= (unsigned long)packetBuffer[43];
|
||||
// return secsSince1900 - 2208988800UL * SECS_PER_HOUR;
|
||||
// }
|
||||
// }
|
||||
// Serial.println("No NTP Response :-(");
|
||||
// return 0; // return 0 if unable to get the time
|
||||
}
|
||||
@@ -1,17 +0,0 @@
|
||||
#pragma once
|
||||
#include "Arduino.h"
|
||||
#include <WiFi.h>
|
||||
#include <WiFiUdp.h>
|
||||
#include <TimeLib.h>
|
||||
#include <ESPNtpClient.h>
|
||||
|
||||
|
||||
|
||||
void initNTP();
|
||||
void initWifi();
|
||||
|
||||
void loopNTP();
|
||||
|
||||
time_t getNtpTime();
|
||||
bool getWifiStatus();
|
||||
bool timeUpdated();
|
||||
63
FW/NCM107-ESP32C3/src/ota.cpp
Normal file
63
FW/NCM107-ESP32C3/src/ota.cpp
Normal file
@@ -0,0 +1,63 @@
|
||||
#include "ota.h"
|
||||
|
||||
|
||||
void initOTA() {
|
||||
Serial.begin(115200);
|
||||
Serial.println("Booting");
|
||||
// WiFi.mode(WIFI_STA);
|
||||
// WiFi.begin(ssid, password);
|
||||
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
|
||||
Serial.println("Connection Failed! Rebooting...");
|
||||
delay(5000);
|
||||
ESP.restart();
|
||||
}
|
||||
|
||||
// Port defaults to 3232
|
||||
// ArduinoOTA.setPort(3232);
|
||||
|
||||
// Hostname defaults to esp3232-[MAC]
|
||||
ArduinoOTA.setHostname("nixie_clock");
|
||||
|
||||
// No authentication by default
|
||||
// ArduinoOTA.setPassword("admin");
|
||||
|
||||
// Password can be set with it's md5 value as well
|
||||
// MD5(admin) = 21232f297a57a5a743894a0e4a801fc3
|
||||
// ArduinoOTA.setPasswordHash("21232f297a57a5a743894a0e4a801fc3");
|
||||
|
||||
ArduinoOTA
|
||||
.onStart([]() {
|
||||
String type;
|
||||
if (ArduinoOTA.getCommand() == U_FLASH)
|
||||
type = "sketch";
|
||||
else // U_SPIFFS
|
||||
type = "filesystem";
|
||||
|
||||
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
|
||||
Serial.println("Start updating " + type);
|
||||
})
|
||||
.onEnd([]() {
|
||||
Serial.println("\nEnd");
|
||||
})
|
||||
.onProgress([](unsigned int progress, unsigned int total) {
|
||||
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
|
||||
})
|
||||
.onError([](ota_error_t error) {
|
||||
Serial.printf("Error[%u]: ", error);
|
||||
if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
|
||||
else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
|
||||
else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
|
||||
else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
|
||||
else if (error == OTA_END_ERROR) Serial.println("End Failed");
|
||||
});
|
||||
|
||||
ArduinoOTA.begin();
|
||||
|
||||
Serial.println("Ready");
|
||||
Serial.print("IP address: ");
|
||||
Serial.println(WiFi.localIP());
|
||||
}
|
||||
|
||||
void loopOTA() {
|
||||
ArduinoOTA.handle();
|
||||
}
|
||||
9
FW/NCM107-ESP32C3/src/ota.h
Normal file
9
FW/NCM107-ESP32C3/src/ota.h
Normal file
@@ -0,0 +1,9 @@
|
||||
#pragma once
|
||||
|
||||
#include <WiFi.h>
|
||||
#include <ESPmDNS.h>
|
||||
#include <WiFiUdp.h>
|
||||
#include <ArduinoOTA.h>
|
||||
|
||||
void initOTA();
|
||||
void loopOTA();
|
||||
246
FW/NCM107-ESP32C3/src/tubes.cpp
Normal file
246
FW/NCM107-ESP32C3/src/tubes.cpp
Normal file
@@ -0,0 +1,246 @@
|
||||
#include "tubes.h"
|
||||
|
||||
|
||||
const word fpsLimit=16666; // 1/60*1.000.000 //limit maximum refresh rate on 60 fps
|
||||
|
||||
String stringToDisplay="000000";// Conten of this string will be displayed on tubes (must be 6 chars length)
|
||||
int menuPosition=0; // 0 - time
|
||||
// 1 - date
|
||||
// 2 - alarm
|
||||
// 3 - 12/24 hours mode
|
||||
|
||||
|
||||
// 0 1 2 3 4 5 6 7 8 9
|
||||
//word SymbolArray[10]={65534, 65533, 65531, 65527, 65519, 65503, 65471, 65407, 65279, 65023};
|
||||
word SymbolArray[10]={1022, 1021, 1019, 1015, 1007, 991, 959, 895, 767, 511};
|
||||
|
||||
byte dotPattern=B00000000; //bit mask for separeting dots
|
||||
//B00000000 - turn off up and down dots
|
||||
//B1100000 - turn off all dots
|
||||
|
||||
|
||||
|
||||
int teststate = -1;
|
||||
String testStringArray[12]={"000000","111111","222222","333333","444444","555555","666666","777777","888888","999999","",""};
|
||||
unsigned long startOfTest;
|
||||
|
||||
bool modeChangedByUser=false;
|
||||
bool transactionInProgress=false;
|
||||
#define timeModePeriod 60000
|
||||
#define dateModePeriod 5000
|
||||
long modesChangePeriod=timeModePeriod;
|
||||
|
||||
|
||||
|
||||
static unsigned long lastTimeInterval1Started;
|
||||
|
||||
|
||||
|
||||
int dlay=500;
|
||||
// bool test=1;
|
||||
byte strIndex=-1;
|
||||
// bool digitsLock=false;
|
||||
|
||||
bool doTest()
|
||||
{
|
||||
if(!timeIsSet()) return true;
|
||||
|
||||
if(teststate == -1)
|
||||
{
|
||||
Serial.println(F("Start Test"));
|
||||
startOfTest=millis();
|
||||
teststate = 0;
|
||||
Serial.println(testStringArray[10]);
|
||||
}
|
||||
|
||||
// byte b=1;
|
||||
|
||||
if ((millis()-startOfTest)>dlay)
|
||||
{
|
||||
startOfTest=millis();
|
||||
strIndex=strIndex+1;
|
||||
if (strIndex==10) dlay=3000;
|
||||
|
||||
stringToDisplay=testStringArray[strIndex];
|
||||
Serial.print("stringToDisplay=");
|
||||
Serial.println(stringToDisplay);
|
||||
Serial.print("strIndex=");
|
||||
Serial.println(strIndex);
|
||||
Serial.print("i=");
|
||||
Serial.println(teststate);
|
||||
|
||||
if (strIndex==11) strIndex = -1;
|
||||
|
||||
}
|
||||
|
||||
doIndication();
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
String antiPoisoning2(String fromStr, String toStr)
|
||||
{
|
||||
//static bool transactionInProgress=false;
|
||||
//byte fromDigits[6];
|
||||
static byte toDigits[6];
|
||||
static byte currentDigits[6];
|
||||
static byte iterationCounter=0;
|
||||
if (!transactionInProgress)
|
||||
{
|
||||
transactionInProgress=true;
|
||||
for (int i=0; i<6; i++)
|
||||
{
|
||||
currentDigits[i]=fromStr.substring(i, i+1).toInt();
|
||||
toDigits[i]=toStr.substring(i, i+1).toInt();
|
||||
}
|
||||
}
|
||||
for (int i=0; i<6; i++)
|
||||
{
|
||||
if (iterationCounter<10) currentDigits[i]++;
|
||||
else if (currentDigits[i]!=toDigits[i]) currentDigits[i]++;
|
||||
if (currentDigits[i]==10) currentDigits[i]=0;
|
||||
}
|
||||
iterationCounter++;
|
||||
if (iterationCounter==20)
|
||||
{
|
||||
iterationCounter=0;
|
||||
transactionInProgress=false;
|
||||
}
|
||||
String tmpStr;
|
||||
for (int i=0; i<6; i++)
|
||||
tmpStr+=currentDigits[i];
|
||||
return tmpStr;
|
||||
}
|
||||
|
||||
void modesChanger()
|
||||
{
|
||||
static unsigned long lastTimeModeChanged=millis();
|
||||
static unsigned long lastTimeAntiPoisoningIterate=millis();
|
||||
if ((millis()-lastTimeModeChanged)>modesChangePeriod)
|
||||
{
|
||||
lastTimeModeChanged=millis();
|
||||
if (menuPosition==TimeIndex) {menuPosition=DateIndex; modesChangePeriod=dateModePeriod;}
|
||||
else {menuPosition=TimeIndex; modesChangePeriod=timeModePeriod;}
|
||||
if (modeChangedByUser==true)
|
||||
{
|
||||
menuPosition=TimeIndex;
|
||||
}
|
||||
modeChangedByUser=false;
|
||||
}
|
||||
if ((millis()-lastTimeModeChanged)<2000)
|
||||
{
|
||||
if ((millis()-lastTimeAntiPoisoningIterate)>100)
|
||||
{
|
||||
lastTimeAntiPoisoningIterate=millis();
|
||||
if (menuPosition==TimeIndex)
|
||||
stringToDisplay=antiPoisoning2(updateDateString(), getTimeNow());
|
||||
else stringToDisplay=antiPoisoning2(getTimeNow(), updateDateString());
|
||||
// Serial.println("StrTDInToModeChng="+stringToDisplay);
|
||||
}
|
||||
} else transactionInProgress=false;
|
||||
}
|
||||
|
||||
|
||||
String updateDisplayString()
|
||||
{
|
||||
static unsigned long lastTimeStringWasUpdated;
|
||||
if ((millis()-lastTimeStringWasUpdated)>1000)
|
||||
{
|
||||
lastTimeStringWasUpdated=millis();
|
||||
return getTimeNow();
|
||||
}
|
||||
return stringToDisplay;
|
||||
}
|
||||
|
||||
|
||||
|
||||
void doIndication()
|
||||
{
|
||||
static byte b=1;
|
||||
if ((millis()-lastTimeInterval1Started)>3)
|
||||
{
|
||||
lastTimeInterval1Started=millis();
|
||||
log_v("update tubes");
|
||||
Anode0OFF; Anode1OFF; Anode2OFF;
|
||||
unsigned long var32;
|
||||
unsigned long tmpVar;
|
||||
|
||||
int curTube=b*2-2;
|
||||
var32=SymbolArray[stringToDisplay.substring(curTube, curTube+1).toInt()];
|
||||
tmpVar=SymbolArray[stringToDisplay.substring(curTube+1, curTube+2).toInt()];
|
||||
|
||||
var32 |= tmpVar<<10;
|
||||
|
||||
digitalWrite(LEpin, LOW); // allow data input (Transparent mode)
|
||||
|
||||
SPI.transfer(var32>>16); //[A3][A2][A1][A0][RC9][RC8][RC7][RC6] - A5-A0 - anodes
|
||||
SPI.transfer(var32>>8); //[RC5][RC4][RC3][RC2][RC1][RC0][LC9][RC8] - RC9-RC0 - Right tubes cathodes
|
||||
SPI.transfer(var32);
|
||||
|
||||
digitalWrite(LEpin, HIGH); // latching data
|
||||
|
||||
switch (b)
|
||||
{
|
||||
case 1:{Anode0ON; Anode1OFF; Anode2OFF; break;};
|
||||
case 2:{Anode0OFF; Anode1ON; Anode2OFF; break;};
|
||||
case 3:{Anode0OFF; Anode1OFF; Anode2ON; break;};
|
||||
}
|
||||
b=b+1;
|
||||
if (b==4) {b=1;}
|
||||
}
|
||||
}
|
||||
|
||||
void doDotBlink()
|
||||
{
|
||||
static unsigned long lastTimeBlink=millis();
|
||||
static bool dotState=0;
|
||||
if ((millis()-lastTimeBlink)>1000)
|
||||
{
|
||||
lastTimeBlink=millis();
|
||||
dotState=!dotState;
|
||||
if (dotState)
|
||||
{
|
||||
dotPattern=B11000000;
|
||||
}
|
||||
else
|
||||
{
|
||||
dotPattern=B00000000;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void initTubes()
|
||||
{
|
||||
pinMode(LEpin, OUTPUT);
|
||||
|
||||
// SPI setup
|
||||
SPI.begin(sckPin,misoPin,mosiPin); //
|
||||
SPI.setDataMode (SPI_MODE3); // Mode 3 SPI
|
||||
SPI.setClockDivider(SPI_CLOCK_DIV128); // SCK = 16MHz/128= 125kHz
|
||||
|
||||
pinMode(Anode0Pin, OUTPUT);
|
||||
pinMode(Anode1Pin, OUTPUT);
|
||||
pinMode(Anode2Pin, OUTPUT);
|
||||
}
|
||||
|
||||
void loopTubes()
|
||||
{
|
||||
if ((menuPosition==TimeIndex) || (modeChangedByUser==false) ) modesChanger();
|
||||
doIndication();
|
||||
|
||||
static bool updateDateTime=false;
|
||||
switch (menuPosition)
|
||||
{
|
||||
case TimeIndex: //time mode
|
||||
if (!transactionInProgress) stringToDisplay=updateDisplayString();
|
||||
break;
|
||||
case DateIndex: //date mode
|
||||
if (!transactionInProgress) stringToDisplay=updateDateString();
|
||||
dotPattern=B01000000;//turn on lower dots
|
||||
break;
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
15
FW/NCM107-ESP32C3/src/tubes.h
Normal file
15
FW/NCM107-ESP32C3/src/tubes.h
Normal file
@@ -0,0 +1,15 @@
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "defines.h"
|
||||
#include <SPI.h>
|
||||
#include "clock.h"
|
||||
|
||||
|
||||
void initTubes();
|
||||
void loopTubes();
|
||||
|
||||
void doIndication();
|
||||
void doDotBlink();
|
||||
bool doTest();
|
||||
|
||||
756
FW/NCM107-ESP32C3/src/wifimanager.cpp
Normal file
756
FW/NCM107-ESP32C3/src/wifimanager.cpp
Normal file
@@ -0,0 +1,756 @@
|
||||
#include "wifimanager.h"
|
||||
|
||||
#ifdef ESP32
|
||||
|
||||
WiFiMulti wifiMulti;
|
||||
|
||||
#if USE_LITTLEFS
|
||||
FS* filesystem = &FileFS;
|
||||
|
||||
#elif USE_SPIFFS
|
||||
FS* filesystem = &SPIFFS;
|
||||
#else
|
||||
FS* filesystem = &FFat;
|
||||
#endif
|
||||
#endif
|
||||
//DoubleResetDetector drd(DRD_TIMEOUT, DRD_ADDRESS);
|
||||
DoubleResetDetector* drd;//////
|
||||
|
||||
// Onboard LED I/O pin on NodeMCU board
|
||||
const int PIN_LED = 2; // D4 on NodeMCU and WeMos. GPIO2/ADC12 of ESP32. Controls the onboard LED.
|
||||
|
||||
|
||||
// Indicates whether ESP has WiFi credentials saved from previous session, or double reset detected
|
||||
bool initialConfig = false;
|
||||
|
||||
WM_Config WM_config;
|
||||
|
||||
#if ( USE_DHCP_IP )
|
||||
// Use DHCP
|
||||
|
||||
#if (_WIFIMGR_LOGLEVEL_ > 3)
|
||||
#warning Using DHCP IP
|
||||
#endif
|
||||
|
||||
IPAddress stationIP = IPAddress(0, 0, 0, 0);
|
||||
IPAddress gatewayIP = IPAddress(192, 168, 2, 1);
|
||||
IPAddress netMask = IPAddress(255, 255, 255, 0);
|
||||
|
||||
#else
|
||||
// Use static IP
|
||||
|
||||
#if (_WIFIMGR_LOGLEVEL_ > 3)
|
||||
#warning Using static IP
|
||||
#endif
|
||||
|
||||
#ifdef ESP32
|
||||
IPAddress stationIP = IPAddress(192, 168, 2, 232);
|
||||
#else
|
||||
IPAddress stationIP = IPAddress(192, 168, 2, 186);
|
||||
#endif
|
||||
|
||||
IPAddress gatewayIP = IPAddress(192, 168, 2, 1);
|
||||
IPAddress netMask = IPAddress(255, 255, 255, 0);
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////
|
||||
|
||||
#define USE_CONFIGURABLE_DNS true
|
||||
|
||||
IPAddress dns1IP = gatewayIP;
|
||||
IPAddress dns2IP = IPAddress(8, 8, 8, 8);
|
||||
|
||||
#define USE_CUSTOM_AP_IP false
|
||||
|
||||
// New in v1.4.0
|
||||
IPAddress APStaticIP = IPAddress(192, 168, 232, 1);
|
||||
IPAddress APStaticGW = IPAddress(192, 168, 232, 1);
|
||||
IPAddress APStaticSN = IPAddress(255, 255, 255, 0);
|
||||
|
||||
// Must be placed before #include <ESP_WiFiManager.h>, or default port 80 will be used
|
||||
//#define HTTP_PORT 8080
|
||||
|
||||
#include <ESP_WiFiManager.h> //https://github.com/khoih-prog/ESP_WiFiManager
|
||||
|
||||
// Redundant, for v1.8.0 only
|
||||
//#include <ESP_WiFiManager-Impl.h> //https://github.com/khoih-prog/ESP_WiFiManager
|
||||
|
||||
// SSID and PW for Config Portal
|
||||
String ssid = "ESP_" + String(ESP_getChipId(), HEX);
|
||||
String password;
|
||||
|
||||
// SSID and PW for your Router
|
||||
String Router_SSID;
|
||||
String Router_Pass;
|
||||
|
||||
// Function Prototypes
|
||||
uint8_t connectMultiWiFi();
|
||||
|
||||
///////////////////////////////////////////
|
||||
// New in v1.4.0
|
||||
/******************************************
|
||||
* // Defined in ESP_WiFiManager.h
|
||||
typedef struct
|
||||
{
|
||||
IPAddress _ap_static_ip;
|
||||
IPAddress _ap_static_gw;
|
||||
IPAddress _ap_static_sn;
|
||||
|
||||
} WiFi_AP_IPConfig;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
IPAddress _sta_static_ip;
|
||||
IPAddress _sta_static_gw;
|
||||
IPAddress _sta_static_sn;
|
||||
#if USE_CONFIGURABLE_DNS
|
||||
IPAddress _sta_static_dns1;
|
||||
IPAddress _sta_static_dns2;
|
||||
#endif
|
||||
} WiFi_STA_IPConfig;
|
||||
******************************************/
|
||||
|
||||
WiFi_AP_IPConfig WM_AP_IPconfig;
|
||||
WiFi_STA_IPConfig WM_STA_IPconfig;
|
||||
|
||||
void initAPIPConfigStruct(WiFi_AP_IPConfig &in_WM_AP_IPconfig)
|
||||
{
|
||||
in_WM_AP_IPconfig._ap_static_ip = APStaticIP;
|
||||
in_WM_AP_IPconfig._ap_static_gw = APStaticGW;
|
||||
in_WM_AP_IPconfig._ap_static_sn = APStaticSN;
|
||||
}
|
||||
|
||||
void initSTAIPConfigStruct(WiFi_STA_IPConfig &in_WM_STA_IPconfig)
|
||||
{
|
||||
in_WM_STA_IPconfig._sta_static_ip = stationIP;
|
||||
in_WM_STA_IPconfig._sta_static_gw = gatewayIP;
|
||||
in_WM_STA_IPconfig._sta_static_sn = netMask;
|
||||
#if USE_CONFIGURABLE_DNS
|
||||
in_WM_STA_IPconfig._sta_static_dns1 = dns1IP;
|
||||
in_WM_STA_IPconfig._sta_static_dns2 = dns2IP;
|
||||
#endif
|
||||
}
|
||||
|
||||
void displayIPConfigStruct(WiFi_STA_IPConfig in_WM_STA_IPconfig)
|
||||
{
|
||||
LOGERROR3(F("stationIP ="), in_WM_STA_IPconfig._sta_static_ip, ", gatewayIP =", in_WM_STA_IPconfig._sta_static_gw);
|
||||
LOGERROR1(F("netMask ="), in_WM_STA_IPconfig._sta_static_sn);
|
||||
#if USE_CONFIGURABLE_DNS
|
||||
LOGERROR3(F("dns1IP ="), in_WM_STA_IPconfig._sta_static_dns1, ", dns2IP =", in_WM_STA_IPconfig._sta_static_dns2);
|
||||
#endif
|
||||
}
|
||||
|
||||
void configWiFi(WiFi_STA_IPConfig in_WM_STA_IPconfig)
|
||||
{
|
||||
#if USE_CONFIGURABLE_DNS
|
||||
// Set static IP, Gateway, Subnetmask, DNS1 and DNS2. New in v1.0.5
|
||||
WiFi.config(in_WM_STA_IPconfig._sta_static_ip, in_WM_STA_IPconfig._sta_static_gw, in_WM_STA_IPconfig._sta_static_sn, in_WM_STA_IPconfig._sta_static_dns1, in_WM_STA_IPconfig._sta_static_dns2);
|
||||
#else
|
||||
// Set static IP, Gateway, Subnetmask, Use auto DNS1 and DNS2.
|
||||
WiFi.config(in_WM_STA_IPconfig._sta_static_ip, in_WM_STA_IPconfig._sta_static_gw, in_WM_STA_IPconfig._sta_static_sn);
|
||||
#endif
|
||||
}
|
||||
|
||||
///////////////////////////////////////////
|
||||
|
||||
uint8_t connectMultiWiFi()
|
||||
{
|
||||
#if ESP32
|
||||
// For ESP32, this better be 0 to shorten the connect time.
|
||||
// For ESP32-S2/C3, must be > 500
|
||||
#if ( USING_ESP32_S2 || USING_ESP32_C3 )
|
||||
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 500L
|
||||
#else
|
||||
// For ESP32 core v1.0.6, must be >= 500
|
||||
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 800L
|
||||
#endif
|
||||
#else
|
||||
// For ESP8266, this better be 2200 to enable connect the 1st time
|
||||
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 2200L
|
||||
#endif
|
||||
|
||||
#define WIFI_MULTI_CONNECT_WAITING_MS 500L
|
||||
|
||||
uint8_t status;
|
||||
|
||||
//WiFi.mode(WIFI_STA);
|
||||
|
||||
LOGERROR(F("ConnectMultiWiFi with :"));
|
||||
|
||||
if ( (Router_SSID != "") && (Router_Pass != "") )
|
||||
{
|
||||
LOGERROR3(F("* Flash-stored Router_SSID = "), Router_SSID, F(", Router_Pass = "), Router_Pass );
|
||||
LOGERROR3(F("* Add SSID = "), Router_SSID, F(", PW = "), Router_Pass );
|
||||
wifiMulti.addAP(Router_SSID.c_str(), Router_Pass.c_str());
|
||||
}
|
||||
|
||||
for (uint8_t i = 0; i < NUM_WIFI_CREDENTIALS; i++)
|
||||
{
|
||||
// Don't permit NULL SSID and password len < MIN_AP_PASSWORD_SIZE (8)
|
||||
if ( (String(WM_config.WiFi_Creds[i].wifi_ssid) != "") && (strlen(WM_config.WiFi_Creds[i].wifi_pw) >= MIN_AP_PASSWORD_SIZE) )
|
||||
{
|
||||
LOGERROR3(F("* Additional SSID = "), WM_config.WiFi_Creds[i].wifi_ssid, F(", PW = "), WM_config.WiFi_Creds[i].wifi_pw );
|
||||
}
|
||||
}
|
||||
|
||||
LOGERROR(F("Connecting MultiWifi..."));
|
||||
|
||||
//WiFi.mode(WIFI_STA);
|
||||
|
||||
#if !USE_DHCP_IP
|
||||
// New in v1.4.0
|
||||
configWiFi(WM_STA_IPconfig);
|
||||
//////
|
||||
#endif
|
||||
|
||||
int i = 0;
|
||||
|
||||
status = wifiMulti.run();
|
||||
delay(WIFI_MULTI_1ST_CONNECT_WAITING_MS);
|
||||
|
||||
while ( ( i++ < 20 ) && ( status != WL_CONNECTED ) )
|
||||
{
|
||||
status = WiFi.status();
|
||||
|
||||
if ( status == WL_CONNECTED )
|
||||
break;
|
||||
else
|
||||
delay(WIFI_MULTI_CONNECT_WAITING_MS);
|
||||
}
|
||||
|
||||
if ( status == WL_CONNECTED )
|
||||
{
|
||||
LOGERROR1(F("WiFi connected after time: "), i);
|
||||
LOGERROR3(F("SSID:"), WiFi.SSID(), F(",RSSI="), WiFi.RSSI());
|
||||
LOGERROR3(F("Channel:"), WiFi.channel(), F(",IP address:"), WiFi.localIP() );
|
||||
}
|
||||
else
|
||||
{
|
||||
LOGERROR(F("WiFi not connected"));
|
||||
|
||||
// To avoid unnecessary DRD
|
||||
drd->loop();
|
||||
|
||||
#if ESP8266
|
||||
ESP.reset();
|
||||
#else
|
||||
ESP.restart();
|
||||
#endif
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
#if USE_ESP_WIFIMANAGER_NTP
|
||||
|
||||
void printLocalTime()
|
||||
{
|
||||
#if ESP8266
|
||||
static time_t now;
|
||||
|
||||
now = time(nullptr);
|
||||
|
||||
if ( now > 1451602800 )
|
||||
{
|
||||
Serial.print("Local Date/Time: ");
|
||||
Serial.print(ctime(&now));
|
||||
}
|
||||
#else
|
||||
struct tm timeinfo;
|
||||
|
||||
getLocalTime( &timeinfo );
|
||||
|
||||
// Valid only if year > 2000.
|
||||
// You can get from timeinfo : tm_year, tm_mon, tm_mday, tm_hour, tm_min, tm_sec
|
||||
if (timeinfo.tm_year > 100 )
|
||||
{
|
||||
Serial.print("Local Date/Time: ");
|
||||
Serial.print( asctime( &timeinfo ) );
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
void heartBeatPrint()
|
||||
{
|
||||
#if USE_ESP_WIFIMANAGER_NTP
|
||||
printLocalTime();
|
||||
#else
|
||||
static int num = 1;
|
||||
|
||||
if (WiFi.status() == WL_CONNECTED)
|
||||
Serial.print(F("H")); // H means connected to WiFi
|
||||
else
|
||||
Serial.print(F("F")); // F means not connected to WiFi
|
||||
|
||||
if (num == 80)
|
||||
{
|
||||
Serial.println();
|
||||
num = 1;
|
||||
}
|
||||
else if (num++ % 10 == 0)
|
||||
{
|
||||
Serial.print(F(" "));
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void check_WiFi()
|
||||
{
|
||||
if ( (WiFi.status() != WL_CONNECTED) )
|
||||
{
|
||||
Serial.println(F("\nWiFi lost. Call connectMultiWiFi in loop"));
|
||||
connectMultiWiFi();
|
||||
}
|
||||
}
|
||||
|
||||
void check_status()
|
||||
{
|
||||
static ulong checkstatus_timeout = 0;
|
||||
static ulong checkwifi_timeout = 0;
|
||||
|
||||
static ulong current_millis;
|
||||
|
||||
#define WIFICHECK_INTERVAL 1000L
|
||||
|
||||
#if USE_ESP_WIFIMANAGER_NTP
|
||||
#define HEARTBEAT_INTERVAL 60000L
|
||||
#else
|
||||
#define HEARTBEAT_INTERVAL 10000L
|
||||
#endif
|
||||
|
||||
current_millis = millis();
|
||||
|
||||
// Check WiFi every WIFICHECK_INTERVAL (1) seconds.
|
||||
if ((current_millis > checkwifi_timeout) || (checkwifi_timeout == 0))
|
||||
{
|
||||
check_WiFi();
|
||||
checkwifi_timeout = current_millis + WIFICHECK_INTERVAL;
|
||||
}
|
||||
|
||||
// Print hearbeat every HEARTBEAT_INTERVAL (10) seconds.
|
||||
if ((current_millis > checkstatus_timeout) || (checkstatus_timeout == 0))
|
||||
{
|
||||
heartBeatPrint();
|
||||
checkstatus_timeout = current_millis + HEARTBEAT_INTERVAL;
|
||||
}
|
||||
}
|
||||
|
||||
int calcChecksum(uint8_t* address, uint16_t sizeToCalc)
|
||||
{
|
||||
uint16_t checkSum = 0;
|
||||
|
||||
for (uint16_t index = 0; index < sizeToCalc; index++)
|
||||
{
|
||||
checkSum += * ( ( (byte*) address ) + index);
|
||||
}
|
||||
|
||||
return checkSum;
|
||||
}
|
||||
|
||||
bool loadConfigData()
|
||||
{
|
||||
File file = FileFS.open(CONFIG_FILENAME, "r");
|
||||
LOGERROR(F("LoadWiFiCfgFile "));
|
||||
|
||||
memset((void*) &WM_config, 0, sizeof(WM_config));
|
||||
|
||||
// New in v1.4.0
|
||||
memset((void*) &WM_STA_IPconfig, 0, sizeof(WM_STA_IPconfig));
|
||||
//////
|
||||
|
||||
if (file)
|
||||
{
|
||||
file.readBytes((char *) &WM_config, sizeof(WM_config));
|
||||
|
||||
// New in v1.4.0
|
||||
file.readBytes((char *) &WM_STA_IPconfig, sizeof(WM_STA_IPconfig));
|
||||
//////
|
||||
|
||||
file.close();
|
||||
LOGERROR(F("OK"));
|
||||
|
||||
if ( WM_config.checksum != calcChecksum( (uint8_t*) &WM_config, sizeof(WM_config) - sizeof(WM_config.checksum) ) )
|
||||
{
|
||||
LOGERROR(F("WM_config checksum wrong"));
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
// New in v1.4.0
|
||||
displayIPConfigStruct(WM_STA_IPconfig);
|
||||
//////
|
||||
|
||||
return true;
|
||||
}
|
||||
else
|
||||
{
|
||||
LOGERROR(F("failed"));
|
||||
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
void saveConfigData()
|
||||
{
|
||||
File file = FileFS.open(CONFIG_FILENAME, "w");
|
||||
LOGERROR(F("SaveWiFiCfgFile "));
|
||||
|
||||
if (file)
|
||||
{
|
||||
WM_config.checksum = calcChecksum( (uint8_t*) &WM_config, sizeof(WM_config) - sizeof(WM_config.checksum) );
|
||||
|
||||
file.write((uint8_t*) &WM_config, sizeof(WM_config));
|
||||
|
||||
displayIPConfigStruct(WM_STA_IPconfig);
|
||||
|
||||
// New in v1.4.0
|
||||
file.write((uint8_t*) &WM_STA_IPconfig, sizeof(WM_STA_IPconfig));
|
||||
//////
|
||||
|
||||
file.close();
|
||||
LOGERROR(F("OK"));
|
||||
}
|
||||
else
|
||||
{
|
||||
LOGERROR(F("failed"));
|
||||
}
|
||||
}
|
||||
|
||||
unsigned long drdtimeout;
|
||||
|
||||
|
||||
void setupwifiman()
|
||||
{
|
||||
// put your setup code here, to run once:
|
||||
// initialize the LED digital pin as an output.
|
||||
pinMode(PIN_LED, OUTPUT);
|
||||
|
||||
Serial.begin(115200);
|
||||
while (!Serial);
|
||||
|
||||
delay(200);
|
||||
|
||||
Serial.print(F("\nStarting ConfigOnDoubleReset with DoubleResetDetect using ")); Serial.print(FS_Name);
|
||||
Serial.print(F(" on ")); Serial.println(ARDUINO_BOARD);
|
||||
Serial.println(ESP_WIFIMANAGER_VERSION);
|
||||
Serial.println(ESP_DOUBLE_RESET_DETECTOR_VERSION);
|
||||
|
||||
#if defined(ESP_WIFIMANAGER_VERSION_MIN)
|
||||
if (ESP_WIFIMANAGER_VERSION_INT < ESP_WIFIMANAGER_VERSION_MIN)
|
||||
{
|
||||
Serial.print("Warning. Must use this example on Version equal or later than : ");
|
||||
Serial.println(ESP_WIFIMANAGER_VERSION_MIN_TARGET);
|
||||
}
|
||||
#endif
|
||||
|
||||
Serial.setDebugOutput(false);
|
||||
|
||||
if (FORMAT_FILESYSTEM)
|
||||
FileFS.format();
|
||||
|
||||
// Format FileFS if not yet
|
||||
#ifdef ESP32
|
||||
if (!FileFS.begin(true))
|
||||
#else
|
||||
if (!FileFS.begin())
|
||||
#endif
|
||||
{
|
||||
#ifdef ESP8266
|
||||
FileFS.format();
|
||||
#endif
|
||||
|
||||
Serial.println(F("SPIFFS/LittleFS failed! Already tried formatting."));
|
||||
|
||||
if (!FileFS.begin())
|
||||
{
|
||||
// prevents debug info from the library to hide err message.
|
||||
delay(100);
|
||||
|
||||
#if USE_LITTLEFS
|
||||
Serial.println(F("LittleFS failed!. Please use SPIFFS or EEPROM. Stay forever"));
|
||||
#else
|
||||
Serial.println(F("SPIFFS failed!. Please use LittleFS or EEPROM. Stay forever"));
|
||||
#endif
|
||||
|
||||
while (true)
|
||||
{
|
||||
delay(1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
drd = new DoubleResetDetector(DRD_TIMEOUT, DRD_ADDRESS);
|
||||
|
||||
unsigned long startedAt = millis();
|
||||
|
||||
// New in v1.4.0
|
||||
initAPIPConfigStruct(WM_AP_IPconfig);
|
||||
initSTAIPConfigStruct(WM_STA_IPconfig);
|
||||
//////
|
||||
|
||||
//Local intialization. Once its business is done, there is no need to keep it around
|
||||
// Use this to default DHCP hostname to ESP8266-XXXXXX or ESP32-XXXXXX
|
||||
//ESP_WiFiManager ESP_wifiManager;
|
||||
// Use this to personalize DHCP hostname (RFC952 conformed)
|
||||
ESP_WiFiManager ESP_wifiManager("ConfigOnDoubleReset");
|
||||
|
||||
#if USE_CUSTOM_AP_IP
|
||||
//set custom ip for portal
|
||||
// New in v1.4.0
|
||||
ESP_wifiManager.setAPStaticIPConfig(WM_AP_IPconfig);
|
||||
//////
|
||||
#endif
|
||||
|
||||
ESP_wifiManager.setMinimumSignalQuality(-1);
|
||||
|
||||
// From v1.0.10 only
|
||||
// Set config portal channel, default = 1. Use 0 => random channel from 1-13
|
||||
ESP_wifiManager.setConfigPortalChannel(0);
|
||||
//////
|
||||
|
||||
#if !USE_DHCP_IP
|
||||
// Set (static IP, Gateway, Subnetmask, DNS1 and DNS2) or (IP, Gateway, Subnetmask). New in v1.0.5
|
||||
// New in v1.4.0
|
||||
ESP_wifiManager.setSTAStaticIPConfig(WM_STA_IPconfig);
|
||||
//////
|
||||
#endif
|
||||
|
||||
// New from v1.1.1
|
||||
#if USING_CORS_FEATURE
|
||||
ESP_wifiManager.setCORSHeader("Your Access-Control-Allow-Origin");
|
||||
#endif
|
||||
|
||||
// We can't use WiFi.SSID() in ESP32 as it's only valid after connected.
|
||||
// SSID and Password stored in ESP32 wifi_ap_record_t and wifi_config_t are also cleared in reboot
|
||||
// Have to create a new function to store in EEPROM/SPIFFS for this purpose
|
||||
Router_SSID = ESP_wifiManager.WiFi_SSID();
|
||||
Router_Pass = ESP_wifiManager.WiFi_Pass();
|
||||
|
||||
//Remove this line if you do not want to see WiFi password printed
|
||||
Serial.println("ESP Self-Stored: SSID = " + Router_SSID + ", Pass = " + Router_Pass);
|
||||
|
||||
// SSID/PWD to uppercase
|
||||
ssid.toUpperCase();
|
||||
password = "nixie";
|
||||
|
||||
bool configDataLoaded = false;
|
||||
|
||||
// From v1.1.0, Don't permit NULL password
|
||||
if ( (Router_SSID != "") && (Router_Pass != "") )
|
||||
{
|
||||
LOGERROR3(F("* Add SSID = "), Router_SSID, F(", PW = "), Router_Pass);
|
||||
wifiMulti.addAP(Router_SSID.c_str(), Router_Pass.c_str());
|
||||
|
||||
ESP_wifiManager.setConfigPortalTimeout(240); //If no access point name has been previously entered disable timeout.
|
||||
Serial.println(F("Got ESP Self-Stored Credentials. Timeout 120s for Config Portal"));
|
||||
}
|
||||
|
||||
if (loadConfigData())
|
||||
{
|
||||
configDataLoaded = true;
|
||||
|
||||
ESP_wifiManager.setConfigPortalTimeout(240); //If no access point name has been previously entered disable timeout.
|
||||
Serial.println(F("Got stored Credentials. Timeout 120s for Config Portal"));
|
||||
|
||||
#if USE_ESP_WIFIMANAGER_NTP
|
||||
if ( strlen(WM_config.TZ_Name) > 0 )
|
||||
{
|
||||
LOGERROR3(F("Current TZ_Name ="), WM_config.TZ_Name, F(", TZ = "), WM_config.TZ);
|
||||
|
||||
#if ESP8266
|
||||
configTime(WM_config.TZ, "pool.ntp.org");
|
||||
#else
|
||||
//configTzTime(WM_config.TZ, "pool.ntp.org" );
|
||||
configTzTime(WM_config.TZ, "time.nist.gov", "0.pool.ntp.org", "1.pool.ntp.org");
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
Serial.println(F("Current Timezone is not set. Enter Config Portal to set."));
|
||||
}
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
// Enter CP only if no stored SSID on flash and file
|
||||
Serial.println(F("Open Config Portal without Timeout: No stored Credentials."));
|
||||
initialConfig = true;
|
||||
}
|
||||
|
||||
if (drd->detectDoubleReset())
|
||||
{
|
||||
// DRD, disable timeout.
|
||||
ESP_wifiManager.setConfigPortalTimeout(0);
|
||||
|
||||
Serial.println(F("Open Config Portal without Timeout: Double Reset Detected"));
|
||||
initialConfig = true;
|
||||
}
|
||||
|
||||
if (initialConfig)
|
||||
{
|
||||
Serial.print(F("Starting configuration portal @ "));
|
||||
|
||||
#if USE_CUSTOM_AP_IP
|
||||
Serial.print(APStaticIP);
|
||||
#else
|
||||
Serial.print(F("192.168.4.1"));
|
||||
#endif
|
||||
|
||||
#if defined(HTTP_PORT_TO_USE)
|
||||
Serial.print(F(":")); Serial.print(HTTP_PORT_TO_USE);
|
||||
#endif
|
||||
|
||||
Serial.print(F(", SSID = "));
|
||||
Serial.print(ssid);
|
||||
Serial.print(F(", PWD = "));
|
||||
Serial.println(password);
|
||||
|
||||
digitalWrite(PIN_LED, LED_ON); // turn the LED on by making the voltage LOW to tell us we are in configuration mode.
|
||||
|
||||
//sets timeout in seconds until configuration portal gets turned off.
|
||||
//If not specified device will remain in configuration mode until
|
||||
//switched off via webserver or device is restarted.
|
||||
//ESP_wifiManager.setConfigPortalTimeout(600);
|
||||
|
||||
#if DISPLAY_STORED_CREDENTIALS_IN_CP
|
||||
// New. Update Credentials, got from loadConfigData(), to display on CP
|
||||
ESP_wifiManager.setCredentials(WM_config.WiFi_Creds[0].wifi_ssid, WM_config.WiFi_Creds[0].wifi_pw,
|
||||
WM_config.WiFi_Creds[1].wifi_ssid, WM_config.WiFi_Creds[1].wifi_pw);
|
||||
#endif
|
||||
|
||||
// Starts an access point
|
||||
if (!ESP_wifiManager.startConfigPortal((const char *) ssid.c_str(), (const char *) password.c_str()))
|
||||
Serial.println(F("Not connected to WiFi but continuing anyway."));
|
||||
else
|
||||
{
|
||||
Serial.println(F("WiFi connected...yeey :)"));
|
||||
}
|
||||
|
||||
// Stored for later usage, from v1.1.0, but clear first
|
||||
memset(&WM_config, 0, sizeof(WM_config));
|
||||
|
||||
for (uint8_t i = 0; i < NUM_WIFI_CREDENTIALS; i++)
|
||||
{
|
||||
String tempSSID = ESP_wifiManager.getSSID(i);
|
||||
String tempPW = ESP_wifiManager.getPW(i);
|
||||
|
||||
if (strlen(tempSSID.c_str()) < sizeof(WM_config.WiFi_Creds[i].wifi_ssid) - 1)
|
||||
strcpy(WM_config.WiFi_Creds[i].wifi_ssid, tempSSID.c_str());
|
||||
else
|
||||
strncpy(WM_config.WiFi_Creds[i].wifi_ssid, tempSSID.c_str(), sizeof(WM_config.WiFi_Creds[i].wifi_ssid) - 1);
|
||||
|
||||
if (strlen(tempPW.c_str()) < sizeof(WM_config.WiFi_Creds[i].wifi_pw) - 1)
|
||||
strcpy(WM_config.WiFi_Creds[i].wifi_pw, tempPW.c_str());
|
||||
else
|
||||
strncpy(WM_config.WiFi_Creds[i].wifi_pw, tempPW.c_str(), sizeof(WM_config.WiFi_Creds[i].wifi_pw) - 1);
|
||||
|
||||
// Don't permit NULL SSID and password len < MIN_AP_PASSWORD_SIZE (8)
|
||||
if ( (String(WM_config.WiFi_Creds[i].wifi_ssid) != "") && (strlen(WM_config.WiFi_Creds[i].wifi_pw) >= MIN_AP_PASSWORD_SIZE) )
|
||||
{
|
||||
LOGERROR3(F("* Add SSID = "), WM_config.WiFi_Creds[i].wifi_ssid, F(", PW = "), WM_config.WiFi_Creds[i].wifi_pw );
|
||||
wifiMulti.addAP(WM_config.WiFi_Creds[i].wifi_ssid, WM_config.WiFi_Creds[i].wifi_pw);
|
||||
}
|
||||
}
|
||||
|
||||
#if USE_ESP_WIFIMANAGER_NTP
|
||||
String tempTZ = ESP_wifiManager.getTimezoneName();
|
||||
|
||||
if (strlen(tempTZ.c_str()) < sizeof(WM_config.TZ_Name) - 1)
|
||||
strcpy(WM_config.TZ_Name, tempTZ.c_str());
|
||||
else
|
||||
strncpy(WM_config.TZ_Name, tempTZ.c_str(), sizeof(WM_config.TZ_Name) - 1);
|
||||
|
||||
const char * TZ_Result = ESP_wifiManager.getTZ(WM_config.TZ_Name);
|
||||
|
||||
if (strlen(TZ_Result) < sizeof(WM_config.TZ) - 1)
|
||||
strcpy(WM_config.TZ, TZ_Result);
|
||||
else
|
||||
strncpy(WM_config.TZ, TZ_Result, sizeof(WM_config.TZ_Name) - 1);
|
||||
|
||||
if ( strlen(WM_config.TZ_Name) > 0 )
|
||||
{
|
||||
LOGERROR3(F("Saving current TZ_Name ="), WM_config.TZ_Name, F(", TZ = "), WM_config.TZ);
|
||||
|
||||
#if ESP8266
|
||||
configTime(WM_config.TZ, "pool.ntp.org");
|
||||
#else
|
||||
//configTzTime(WM_config.TZ, "pool.ntp.org" );
|
||||
configTzTime(WM_config.TZ, "time.nist.gov", "0.pool.ntp.org", "1.pool.ntp.org");
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
LOGERROR(F("Current Timezone Name is not set. Enter Config Portal to set."));
|
||||
}
|
||||
#endif
|
||||
|
||||
// New in v1.4.0
|
||||
ESP_wifiManager.getSTAStaticIPConfig(WM_STA_IPconfig);
|
||||
//////
|
||||
|
||||
saveConfigData();
|
||||
}
|
||||
|
||||
digitalWrite(PIN_LED, LED_OFF); // Turn led off as we are not in configuration mode.
|
||||
|
||||
startedAt = millis();
|
||||
|
||||
if (!initialConfig)
|
||||
{
|
||||
// Load stored data, the addAP ready for MultiWiFi reconnection
|
||||
if (!configDataLoaded)
|
||||
loadConfigData();
|
||||
|
||||
for (uint8_t i = 0; i < NUM_WIFI_CREDENTIALS; i++)
|
||||
{
|
||||
// Don't permit NULL SSID and password len < MIN_AP_PASSWORD_SIZE (8)
|
||||
if ( (String(WM_config.WiFi_Creds[i].wifi_ssid) != "") && (strlen(WM_config.WiFi_Creds[i].wifi_pw) >= MIN_AP_PASSWORD_SIZE) )
|
||||
{
|
||||
LOGERROR3(F("* Add SSID = "), WM_config.WiFi_Creds[i].wifi_ssid, F(", PW = "), WM_config.WiFi_Creds[i].wifi_pw );
|
||||
wifiMulti.addAP(WM_config.WiFi_Creds[i].wifi_ssid, WM_config.WiFi_Creds[i].wifi_pw);
|
||||
}
|
||||
}
|
||||
|
||||
if ( WiFi.status() != WL_CONNECTED )
|
||||
{
|
||||
Serial.println(F("ConnectMultiWiFi in setup"));
|
||||
|
||||
connectMultiWiFi();
|
||||
}
|
||||
}
|
||||
|
||||
Serial.print(F("After waiting "));
|
||||
Serial.print((float) (millis() - startedAt) / 1000);
|
||||
Serial.print(F(" secs more in setup(), connection result is "));
|
||||
|
||||
if (WiFi.status() == WL_CONNECTED)
|
||||
{
|
||||
Serial.print(F("connected. Local IP: "));
|
||||
Serial.println(WiFi.localIP());
|
||||
}
|
||||
else
|
||||
Serial.println(ESP_wifiManager.getStatus(WiFi.status()));
|
||||
|
||||
drdtimeout=millis();
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
void loopwifiman()
|
||||
{
|
||||
// Call the double reset detector loop method every so often,
|
||||
// so that it can recognise when the timeout expires.
|
||||
// You can also call drd.stop() when you wish to no longer
|
||||
// consider the next reset as a double reset.
|
||||
|
||||
|
||||
drd->loop();
|
||||
|
||||
|
||||
// put your main code here, to run repeatedly
|
||||
check_status();
|
||||
|
||||
}
|
||||
303
FW/NCM107-ESP32C3/src/wifimanager.h
Normal file
303
FW/NCM107-ESP32C3/src/wifimanager.h
Normal file
@@ -0,0 +1,303 @@
|
||||
#pragma once
|
||||
|
||||
/****************************************************************************************************************************
|
||||
ConfigOnDoubleReset.ino
|
||||
For ESP8266 / ESP32 boards
|
||||
|
||||
ESP_WiFiManager is a library for the ESP8266/ESP32 platform (https://github.com/esp8266/Arduino) to enable easy
|
||||
configuration and reconfiguration of WiFi credentials using a Captive Portal. Inspired by:
|
||||
http://www.esp8266.com/viewtopic.php?f=29&t=2520
|
||||
https://github.com/chriscook8/esp-arduino-apboot
|
||||
https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortalAdvanced/
|
||||
|
||||
Modified from Tzapu https://github.com/tzapu/WiFiManager
|
||||
and from Ken Taylor https://github.com/kentaylor
|
||||
|
||||
Built by Khoi Hoang https://github.com/khoih-prog/ESP_WiFiManager
|
||||
Licensed under MIT license
|
||||
*****************************************************************************************************************************/
|
||||
/****************************************************************************************************************************
|
||||
This example will open a configuration portal when the reset button is pressed twice.
|
||||
This method works well on Wemos boards which have a single reset button on board. It avoids using a pin for launching the configuration portal.
|
||||
|
||||
How It Works
|
||||
1) ESP8266
|
||||
Save data in RTC memory
|
||||
2) ESP32
|
||||
Save data in EEPROM from address 256, size 512 bytes (both configurable)
|
||||
|
||||
So when the device starts up it checks this region of ram for a flag to see if it has been recently reset.
|
||||
If so it launches a configuration portal, if not it sets the reset flag. After running for a while this flag is cleared so that
|
||||
it will only launch the configuration portal in response to closely spaced resets.
|
||||
|
||||
Settings
|
||||
There are two values to be set in the sketch.
|
||||
|
||||
DRD_TIMEOUT - Number of seconds to wait for the second reset. Set to 10 in the example.
|
||||
DRD_ADDRESS - The address in ESP8266 RTC RAM to store the flag. This memory must not be used for other purposes in the same sketch. Set to 0 in the example.
|
||||
|
||||
This example, originally relied on the Double Reset Detector library from https://github.com/datacute/DoubleResetDetector
|
||||
To support ESP32, use ESP_DoubleResetDetector library from //https://github.com/khoih-prog/ESP_DoubleResetDetector
|
||||
*****************************************************************************************************************************/
|
||||
|
||||
void loopwifiman();
|
||||
void setupwifiman();
|
||||
|
||||
#if !( defined(ESP8266) || defined(ESP32) )
|
||||
#error This code is intended to run on the ESP8266 or ESP32 platform! Please check your Tools->Board setting.
|
||||
#endif
|
||||
|
||||
#define ESP_WIFIMANAGER_VERSION_MIN_TARGET "ESP_WiFiManager v1.12.0"
|
||||
#define ESP_WIFIMANAGER_VERSION_MIN 1012000
|
||||
|
||||
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
|
||||
#define _WIFIMGR_LOGLEVEL_ 1
|
||||
|
||||
// To not display stored SSIDs and PWDs on Config Portal, select false. Default is true
|
||||
// Even the stored Credentials are not display, just leave them all blank to reconnect and reuse the stored Credentials
|
||||
//#define DISPLAY_STORED_CREDENTIALS_IN_CP false
|
||||
|
||||
#include <FS.h>
|
||||
|
||||
//Ported to ESP32
|
||||
#ifdef ESP32
|
||||
#include <esp_wifi.h>
|
||||
#include <WiFi.h>
|
||||
#include <WiFiClient.h>
|
||||
|
||||
// From v1.1.0
|
||||
#include <WiFiMulti.h>
|
||||
|
||||
// LittleFS has higher priority than SPIFFS
|
||||
#if ( defined(ESP_ARDUINO_VERSION_MAJOR) && (ESP_ARDUINO_VERSION_MAJOR >= 2) )
|
||||
#define USE_LITTLEFS true
|
||||
#define USE_SPIFFS false
|
||||
#elif defined(ARDUINO_ESP32C3_DEV)
|
||||
// For core v1.0.6-, ESP32-C3 only supporting SPIFFS and EEPROM. To use v2.0.0+ for LittleFS
|
||||
#define USE_LITTLEFS false
|
||||
#define USE_SPIFFS true
|
||||
#endif
|
||||
|
||||
#if USE_LITTLEFS
|
||||
// Use LittleFS
|
||||
#include "FS.h"
|
||||
|
||||
// Check cores/esp32/esp_arduino_version.h and cores/esp32/core_version.h
|
||||
//#if ( ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(2, 0, 0) ) //(ESP_ARDUINO_VERSION_MAJOR >= 2)
|
||||
#if ( defined(ESP_ARDUINO_VERSION_MAJOR) && (ESP_ARDUINO_VERSION_MAJOR >= 2) )
|
||||
#if (_WIFIMGR_LOGLEVEL_ > 3)
|
||||
#warning Using ESP32 Core 1.0.6 or 2.0.0+
|
||||
#endif
|
||||
|
||||
// The library has been merged into esp32 core from release 1.0.6
|
||||
#include <LittleFS.h> // https://github.com/espressif/arduino-esp32/tree/master/libraries/LittleFS
|
||||
|
||||
#define FileFS LittleFS
|
||||
#define FS_Name "LittleFS"
|
||||
#else
|
||||
#if (_WIFIMGR_LOGLEVEL_ > 3)
|
||||
#warning Using ESP32 Core 1.0.5-. You must install LITTLEFS library
|
||||
#endif
|
||||
|
||||
// The library has been merged into esp32 core from release 1.0.6
|
||||
#include <LITTLEFS.h> // https://github.com/lorol/LITTLEFS
|
||||
#define FileFS LITTLEFS
|
||||
#define FS_Name "LittleFS"
|
||||
#endif
|
||||
|
||||
#elif USE_SPIFFS
|
||||
#include <SPIFFS.h>
|
||||
#define FileFS SPIFFS
|
||||
#define FS_Name "SPIFFS"
|
||||
#else
|
||||
// Use FFat
|
||||
#include <FFat.h>
|
||||
#define FileFS FFat
|
||||
#define FS_Name "FFat"
|
||||
#endif
|
||||
//////
|
||||
|
||||
#define LED_BUILTIN 2
|
||||
#define LED_ON HIGH
|
||||
#define LED_OFF LOW
|
||||
|
||||
#else
|
||||
#include <ESP8266WiFi.h> //https://github.com/esp8266/Arduino
|
||||
//needed for library
|
||||
#include <DNSServer.h>
|
||||
#include <ESP8266WebServer.h>
|
||||
|
||||
// From v1.1.0
|
||||
#include <ESP8266WiFiMulti.h>
|
||||
ESP8266WiFiMulti wifiMulti;
|
||||
|
||||
#define USE_LITTLEFS true
|
||||
|
||||
#if USE_LITTLEFS
|
||||
#include <LittleFS.h>
|
||||
FS* filesystem = &LittleFS;
|
||||
#define FileFS LittleFS
|
||||
#define FS_Name "LittleFS"
|
||||
#else
|
||||
FS* filesystem = &SPIFFS;
|
||||
#define FileFS SPIFFS
|
||||
#define FS_Name "SPIFFS"
|
||||
#endif
|
||||
//////
|
||||
|
||||
#define ESP_getChipId() (ESP.getChipId())
|
||||
|
||||
#define LED_ON LOW
|
||||
#define LED_OFF HIGH
|
||||
#endif
|
||||
|
||||
// These defines must be put before #include <ESP_DoubleResetDetector.h>
|
||||
// to select where to store DoubleResetDetector's variable.
|
||||
// For ESP32, You must select one to be true (EEPROM or SPIFFS)
|
||||
// For ESP8266, You must select one to be true (RTC, EEPROM, SPIFFS or LITTLEFS)
|
||||
// Otherwise, library will use default EEPROM storage
|
||||
#ifdef ESP32
|
||||
|
||||
// These defines must be put before #include <ESP_DoubleResetDetector.h>
|
||||
// to select where to store DoubleResetDetector's variable.
|
||||
// For ESP32, You must select one to be true (EEPROM or SPIFFS)
|
||||
// Otherwise, library will use default EEPROM storage
|
||||
#if USE_LITTLEFS
|
||||
#define ESP_DRD_USE_LITTLEFS true
|
||||
#define ESP_DRD_USE_SPIFFS false
|
||||
#define ESP_DRD_USE_EEPROM false
|
||||
#elif USE_SPIFFS
|
||||
#define ESP_DRD_USE_LITTLEFS false
|
||||
#define ESP_DRD_USE_SPIFFS true
|
||||
#define ESP_DRD_USE_EEPROM false
|
||||
#else
|
||||
#define ESP_DRD_USE_LITTLEFS false
|
||||
#define ESP_DRD_USE_SPIFFS false
|
||||
#define ESP_DRD_USE_EEPROM true
|
||||
#endif
|
||||
|
||||
#else //ESP8266
|
||||
|
||||
// For DRD
|
||||
// These defines must be put before #include <ESP_DoubleResetDetector.h>
|
||||
// to select where to store DoubleResetDetector's variable.
|
||||
// For ESP8266, You must select one to be true (RTC, EEPROM, SPIFFS or LITTLEFS)
|
||||
// Otherwise, library will use default EEPROM storage
|
||||
#if USE_LITTLEFS
|
||||
#define ESP_DRD_USE_LITTLEFS true
|
||||
#define ESP_DRD_USE_SPIFFS false
|
||||
#else
|
||||
#define ESP_DRD_USE_LITTLEFS false
|
||||
#define ESP_DRD_USE_SPIFFS true
|
||||
#endif
|
||||
|
||||
#define ESP_DRD_USE_EEPROM false
|
||||
#define ESP8266_DRD_USE_RTC false
|
||||
#endif
|
||||
|
||||
#define DOUBLERESETDETECTOR_DEBUG false
|
||||
|
||||
#include <ESP_DoubleResetDetector.h> //https://github.com/khoih-prog/ESP_DoubleResetDetector
|
||||
|
||||
// Number of seconds after reset during which a
|
||||
// subseqent reset will be considered a double reset.
|
||||
#define DRD_TIMEOUT 10
|
||||
|
||||
// RTC Memory Address for the DoubleResetDetector to use
|
||||
#define DRD_ADDRESS 0
|
||||
|
||||
|
||||
|
||||
// From v1.1.0
|
||||
// You only need to format the filesystem once
|
||||
//#define FORMAT_FILESYSTEM true
|
||||
#define FORMAT_FILESYSTEM false
|
||||
|
||||
#define MIN_AP_PASSWORD_SIZE 8
|
||||
|
||||
#define SSID_MAX_LEN 32
|
||||
//From v1.0.10, WPA2 passwords can be up to 63 characters long.
|
||||
#define PASS_MAX_LEN 64
|
||||
|
||||
typedef struct
|
||||
{
|
||||
char wifi_ssid[SSID_MAX_LEN];
|
||||
char wifi_pw [PASS_MAX_LEN];
|
||||
} WiFi_Credentials;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
String wifi_ssid;
|
||||
String wifi_pw;
|
||||
} WiFi_Credentials_String;
|
||||
|
||||
#define NUM_WIFI_CREDENTIALS 2
|
||||
|
||||
// Assuming max 491 chars
|
||||
#define TZNAME_MAX_LEN 50
|
||||
#define TIMEZONE_MAX_LEN 50
|
||||
|
||||
typedef struct
|
||||
{
|
||||
WiFi_Credentials WiFi_Creds [NUM_WIFI_CREDENTIALS];
|
||||
char TZ_Name[TZNAME_MAX_LEN]; // "America/Toronto"
|
||||
char TZ[TIMEZONE_MAX_LEN]; // "EST5EDT,M3.2.0,M11.1.0"
|
||||
uint16_t checksum;
|
||||
} WM_Config;
|
||||
|
||||
|
||||
|
||||
#define CONFIG_FILENAME F("/wifi_cred.dat")
|
||||
//////
|
||||
|
||||
|
||||
|
||||
// Use false if you don't like to display Available Pages in Information Page of Config Portal
|
||||
// Comment out or use true to display Available Pages in Information Page of Config Portal
|
||||
// Must be placed before #include <ESP_WiFiManager.h>
|
||||
#define USE_AVAILABLE_PAGES true //false
|
||||
|
||||
// From v1.0.10 to permit disable/enable StaticIP configuration in Config Portal from sketch. Valid only if DHCP is used.
|
||||
// You'll loose the feature of dynamically changing from DHCP to static IP, or vice versa
|
||||
// You have to explicitly specify false to disable the feature.
|
||||
//#define USE_STATIC_IP_CONFIG_IN_CP false
|
||||
|
||||
// Use false to disable NTP config. Advisable when using Cellphone, Tablet to access Config Portal.
|
||||
// See Issue 23: On Android phone ConfigPortal is unresponsive (https://github.com/khoih-prog/ESP_WiFiManager/issues/23)
|
||||
#define USE_ESP_WIFIMANAGER_NTP true
|
||||
|
||||
// Just use enough to save memory. On ESP8266, can cause blank ConfigPortal screen
|
||||
// if using too much memory
|
||||
#define USING_AFRICA false
|
||||
#define USING_AMERICA false
|
||||
#define USING_ANTARCTICA false
|
||||
#define USING_ASIA false
|
||||
#define USING_ATLANTIC false
|
||||
#define USING_AUSTRALIA false
|
||||
#define USING_EUROPE true
|
||||
#define USING_INDIAN false
|
||||
#define USING_PACIFIC false
|
||||
#define USING_ETC_GMT false
|
||||
|
||||
// Use true to enable CloudFlare NTP service. System can hang if you don't have Internet access while accessing CloudFlare
|
||||
// See Issue #21: CloudFlare link in the default portal (https://github.com/khoih-prog/ESP_WiFiManager/issues/21)
|
||||
#define USE_CLOUDFLARE_NTP false
|
||||
|
||||
// New in v1.0.11
|
||||
#define USING_CORS_FEATURE true
|
||||
|
||||
////////////////////////////////////////////
|
||||
|
||||
// Use USE_DHCP_IP == true for dynamic DHCP IP, false to use static IP which you have to change accordingly to your network
|
||||
#if (defined(USE_STATIC_IP_CONFIG_IN_CP) && !USE_STATIC_IP_CONFIG_IN_CP)
|
||||
// Force DHCP to be true
|
||||
#if defined(USE_DHCP_IP)
|
||||
#undef USE_DHCP_IP
|
||||
#endif
|
||||
#define USE_DHCP_IP true
|
||||
#else
|
||||
// You can select DHCP or Static IP here
|
||||
#define USE_DHCP_IP true
|
||||
//#define USE_DHCP_IP false
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user