PCB v1.3 changes + code test
This commit is contained in:
@@ -13,4 +13,6 @@ platform = espressif8266
|
||||
board = esp12e
|
||||
framework = arduino
|
||||
monitor_speed = 115200
|
||||
lib_deps = fastled/FastLED@^3.4.0
|
||||
lib_deps =
|
||||
thingpulse/ESP8266 and ESP32 OLED driver for SSD1306 displays@^4.2.0
|
||||
paulstoffregen/Time@^1.6
|
||||
|
||||
50
P1_gateway_FW/src/images.h
Normal file
50
P1_gateway_FW/src/images.h
Normal file
@@ -0,0 +1,50 @@
|
||||
#define WiFi_Logo_width 60
|
||||
#define WiFi_Logo_height 36
|
||||
const uint8_t WiFi_Logo_bits[] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0x07, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0xE0, 0xFF, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF,
|
||||
0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0xFF, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0xFE, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
|
||||
0xFF, 0x03, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
|
||||
0x00, 0xFF, 0xFF, 0xFF, 0x07, 0xC0, 0x83, 0x01, 0x80, 0xFF, 0xFF, 0xFF,
|
||||
0x01, 0x00, 0x07, 0x00, 0xC0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x0C, 0x00,
|
||||
0xC0, 0xFF, 0xFF, 0x7C, 0x00, 0x60, 0x0C, 0x00, 0xC0, 0x31, 0x46, 0x7C,
|
||||
0xFC, 0x77, 0x08, 0x00, 0xE0, 0x23, 0xC6, 0x3C, 0xFC, 0x67, 0x18, 0x00,
|
||||
0xE0, 0x23, 0xE4, 0x3F, 0x1C, 0x00, 0x18, 0x00, 0xE0, 0x23, 0x60, 0x3C,
|
||||
0x1C, 0x70, 0x18, 0x00, 0xE0, 0x03, 0x60, 0x3C, 0x1C, 0x70, 0x18, 0x00,
|
||||
0xE0, 0x07, 0x60, 0x3C, 0xFC, 0x73, 0x18, 0x00, 0xE0, 0x87, 0x70, 0x3C,
|
||||
0xFC, 0x73, 0x18, 0x00, 0xE0, 0x87, 0x70, 0x3C, 0x1C, 0x70, 0x18, 0x00,
|
||||
0xE0, 0x87, 0x70, 0x3C, 0x1C, 0x70, 0x18, 0x00, 0xE0, 0x8F, 0x71, 0x3C,
|
||||
0x1C, 0x70, 0x18, 0x00, 0xC0, 0xFF, 0xFF, 0x3F, 0x00, 0x00, 0x08, 0x00,
|
||||
0xC0, 0xFF, 0xFF, 0x1F, 0x00, 0x00, 0x0C, 0x00, 0x80, 0xFF, 0xFF, 0x1F,
|
||||
0x00, 0x00, 0x06, 0x00, 0x80, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0x07, 0x00,
|
||||
0x00, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0xF8, 0xFF, 0xFF,
|
||||
0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFF, 0xFF, 0x01, 0x00, 0x00,
|
||||
0x00, 0x00, 0xFC, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF,
|
||||
0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x1F, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x80, 0xFF, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
};
|
||||
|
||||
const unsigned char activeSymbol[] PROGMEM = {
|
||||
B00000000,
|
||||
B00000000,
|
||||
B00011000,
|
||||
B00100100,
|
||||
B01000010,
|
||||
B01000010,
|
||||
B00100100,
|
||||
B00011000
|
||||
};
|
||||
|
||||
const unsigned char inactiveSymbol[] PROGMEM = {
|
||||
B00000000,
|
||||
B00000000,
|
||||
B00000000,
|
||||
B00000000,
|
||||
B00011000,
|
||||
B00011000,
|
||||
B00000000,
|
||||
B00000000
|
||||
};
|
||||
@@ -1,16 +1,220 @@
|
||||
#include <Arduino.h>
|
||||
#include "FastLED.h"
|
||||
/**
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2018 by ThingPulse, Daniel Eichhorn
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in all
|
||||
* copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
* SOFTWARE.
|
||||
*
|
||||
* ThingPulse invests considerable time and money to develop these open source libraries.
|
||||
* Please support us by buying our products (and not the clones) from
|
||||
* https://thingpulse.com
|
||||
*
|
||||
*/
|
||||
|
||||
#define WS_DAT 14
|
||||
#include <TimeLib.h>
|
||||
|
||||
CRGB leds[1];
|
||||
// Include the correct display library
|
||||
// For a connection via I2C using Wire include
|
||||
#include <Wire.h> // Only needed for Arduino 1.6.5 and earlier
|
||||
#include "SSD1306Wire.h" // legacy include: `#include "SSD1306.h"`
|
||||
// or #include "SH1106Wire.h", legacy include: `#include "SH1106.h"`
|
||||
// For a connection via I2C using brzo_i2c (must be installed) include
|
||||
// #include <brzo_i2c.h> // Only needed for Arduino 1.6.5 and earlier
|
||||
// #include "SSD1306Brzo.h"
|
||||
// #include "SH1106Brzo.h"
|
||||
// For a connection via SPI include
|
||||
// #include <SPI.h> // Only needed for Arduino 1.6.5 and earlier
|
||||
// #include "SSD1306Spi.h"
|
||||
// #include "SH1106SPi.h"
|
||||
|
||||
void setup() {
|
||||
// put your setup code here, to run once:
|
||||
FastLED.addLeds<WS2812B, WS_DAT, RGB>(leds, 1);
|
||||
// Include the UI lib
|
||||
#include "OLEDDisplayUi.h"
|
||||
|
||||
// Include custom images
|
||||
#include "images.h"
|
||||
|
||||
// Use the corresponding display class:
|
||||
|
||||
// Initialize the OLED display using SPI
|
||||
// D5 -> CLK
|
||||
// D7 -> MOSI (DOUT)
|
||||
// D0 -> RES
|
||||
// D2 -> DC
|
||||
// D8 -> CS
|
||||
// SSD1306Spi display(D0, D2, D8);
|
||||
// or
|
||||
// SH1106Spi display(D0, D2);
|
||||
|
||||
// Initialize the OLED display using brzo_i2c
|
||||
// D3 -> SDA
|
||||
// D5 -> SCL
|
||||
// SSD1306Brzo display(0x3c, D3, D5);
|
||||
// or
|
||||
// SH1106Brzo display(0x3c, D3, D5);
|
||||
|
||||
// Initialize the OLED display using Wire library
|
||||
SSD1306Wire display(0x3c, SDA, SCL);
|
||||
// SH1106 display(0x3c, D3, D5);
|
||||
|
||||
OLEDDisplayUi ui(&display);
|
||||
|
||||
int screenW = 128;
|
||||
int screenH = 64;
|
||||
int clockCenterX = screenW / 2;
|
||||
int clockCenterY = ((screenH - 16) / 2) + 16; // top yellow part is 16 px height
|
||||
int clockRadius = 23;
|
||||
|
||||
// utility function for digital clock display: prints leading 0
|
||||
String twoDigits(int digits)
|
||||
{
|
||||
if (digits < 10)
|
||||
{
|
||||
String i = '0' + String(digits);
|
||||
return i;
|
||||
}
|
||||
else
|
||||
{
|
||||
return String(digits);
|
||||
}
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// put your main code here, to run repeatedly:
|
||||
}
|
||||
void clockOverlay(OLEDDisplay *display, OLEDDisplayUiState *state)
|
||||
{
|
||||
}
|
||||
|
||||
void analogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
|
||||
{
|
||||
// ui.disableIndicator();
|
||||
|
||||
// Draw the clock face
|
||||
// display->drawCircle(clockCenterX + x, clockCenterY + y, clockRadius);
|
||||
display->drawCircle(clockCenterX + x, clockCenterY + y, 2);
|
||||
//
|
||||
//hour ticks
|
||||
for (int z = 0; z < 360; z = z + 30)
|
||||
{
|
||||
//Begin at 0° and stop at 360°
|
||||
float angle = z;
|
||||
angle = (angle / 57.29577951); //Convert degrees to radians
|
||||
int x2 = (clockCenterX + (sin(angle) * clockRadius));
|
||||
int y2 = (clockCenterY - (cos(angle) * clockRadius));
|
||||
int x3 = (clockCenterX + (sin(angle) * (clockRadius - (clockRadius / 8))));
|
||||
int y3 = (clockCenterY - (cos(angle) * (clockRadius - (clockRadius / 8))));
|
||||
display->drawLine(x2 + x, y2 + y, x3 + x, y3 + y);
|
||||
}
|
||||
|
||||
// display second hand
|
||||
float angle = second() * 6;
|
||||
angle = (angle / 57.29577951); //Convert degrees to radians
|
||||
int x3 = (clockCenterX + (sin(angle) * (clockRadius - (clockRadius / 5))));
|
||||
int y3 = (clockCenterY - (cos(angle) * (clockRadius - (clockRadius / 5))));
|
||||
display->drawLine(clockCenterX + x, clockCenterY + y, x3 + x, y3 + y);
|
||||
//
|
||||
// display minute hand
|
||||
angle = minute() * 6;
|
||||
angle = (angle / 57.29577951); //Convert degrees to radians
|
||||
x3 = (clockCenterX + (sin(angle) * (clockRadius - (clockRadius / 4))));
|
||||
y3 = (clockCenterY - (cos(angle) * (clockRadius - (clockRadius / 4))));
|
||||
display->drawLine(clockCenterX + x, clockCenterY + y, x3 + x, y3 + y);
|
||||
//
|
||||
// display hour hand
|
||||
angle = hour() * 30 + int((minute() / 12) * 6);
|
||||
angle = (angle / 57.29577951); //Convert degrees to radians
|
||||
x3 = (clockCenterX + (sin(angle) * (clockRadius - (clockRadius / 2))));
|
||||
y3 = (clockCenterY - (cos(angle) * (clockRadius - (clockRadius / 2))));
|
||||
display->drawLine(clockCenterX + x, clockCenterY + y, x3 + x, y3 + y);
|
||||
}
|
||||
|
||||
void digitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
|
||||
{
|
||||
String timenow = String(hour()) + ":" + twoDigits(minute()) + ":" + twoDigits(second());
|
||||
display->setTextAlignment(TEXT_ALIGN_CENTER);
|
||||
display->setFont(ArialMT_Plain_24);
|
||||
display->drawString(clockCenterX + x, clockCenterY + y, timenow);
|
||||
}
|
||||
|
||||
// This array keeps function pointers to all frames
|
||||
// frames are the single views that slide in
|
||||
FrameCallback frames[] = {analogClockFrame, digitalClockFrame};
|
||||
|
||||
// how many frames are there?
|
||||
int frameCount = 2;
|
||||
|
||||
// Overlays are statically drawn on top of a frame eg. a clock
|
||||
OverlayCallback overlays[] = {clockOverlay};
|
||||
int overlaysCount = 1;
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
Serial.println();
|
||||
|
||||
// The ESP is capable of rendering 60fps in 80Mhz mode
|
||||
// but that won't give you much time for anything else
|
||||
// run it in 160Mhz mode or just set it to 30 fps
|
||||
ui.setTargetFPS(60);
|
||||
|
||||
// Customize the active and inactive symbol
|
||||
ui.setActiveSymbol(activeSymbol);
|
||||
ui.setInactiveSymbol(inactiveSymbol);
|
||||
|
||||
// You can change this to
|
||||
// TOP, LEFT, BOTTOM, RIGHT
|
||||
ui.setIndicatorPosition(TOP);
|
||||
|
||||
// Defines where the first frame is located in the bar.
|
||||
ui.setIndicatorDirection(LEFT_RIGHT);
|
||||
|
||||
// You can change the transition that is used
|
||||
// SLIDE_LEFT, SLIDE_RIGHT, SLIDE_UP, SLIDE_DOWN
|
||||
ui.setFrameAnimation(SLIDE_LEFT);
|
||||
|
||||
ui.disableAllIndicators();
|
||||
|
||||
// Add frames
|
||||
ui.setFrames(frames, frameCount);
|
||||
|
||||
// Add overlays
|
||||
ui.setOverlays(overlays, overlaysCount);
|
||||
|
||||
// Initialising the UI will init the display too.
|
||||
ui.init();
|
||||
|
||||
//display.flipScreenVertically();
|
||||
|
||||
unsigned long secsSinceStart = millis();
|
||||
// Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
|
||||
const unsigned long seventyYears = 2208988800UL;
|
||||
// subtract seventy years:
|
||||
unsigned long epoch = secsSinceStart - seventyYears * SECS_PER_HOUR;
|
||||
setTime(epoch);
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
int remainingTimeBudget = ui.update();
|
||||
|
||||
if (remainingTimeBudget > 0)
|
||||
{
|
||||
// You can do some work here
|
||||
// Don't do stuff if you are below your
|
||||
// time budget.
|
||||
delay(remainingTimeBudget);
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user