update hostname and MQTT broker

.gitignore

@@ -1 +1,6 @@
 .pio/
+.vscode/
+*/.DS_store
+.DS_Store
+.vscode/c_cpp_properties.json
+.vscode/launch.json

.vscode/c_cpp_properties.json

@@ -10,10 +10,15 @@
             "includePath": [
                 "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/include",
                 "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32",
-                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SGP30 Sensor",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/lib/JC_Button/src",
-                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SCD30",
+                "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ArduinoOTA/src",
-                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit BusIO",
+                "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ESPmDNS/src",
+                "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Update/src",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/lib/IP5306",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/SparkFun SGP30 Arduino Library/src",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/SparkFun SCD30 Arduino Library/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Wire/src",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/JC_Button/src",
                 "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/TJpg_Decoder/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/SD/src",
                 "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/RunningMedian",
@@ -87,8 +92,10 @@
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/fb_gfx",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/cores/esp32",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/variants/esp32",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit BusIO",
                 "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit GFX Library",
-                "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ArduinoOTA/src",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SCD30",
+                "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SGP30 Sensor",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/AsyncUDP/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/AzureIoT/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src",
@@ -96,7 +103,6 @@
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/DNSServer/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/EEPROM/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ESP32/src",
-                "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ESPmDNS/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/FFat/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/HTTPClient/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/HTTPUpdate/src",
@@ -106,11 +112,9 @@
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/SD_MMC/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/SimpleBLE/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Ticker/src",
-                "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Update/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/WebServer/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/WiFiClientSecure/src",
                 "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/WiFiProv/src",
-                "/Users/willemoldemans/.platformio/packages/tool-unity",
                 ""
             ],
             "browse": {
@@ -118,10 +122,15 @@
                 "path": [
                     "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/include",
                     "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32",
-                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SGP30 Sensor",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/lib/JC_Button/src",
-                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SCD30",
+                    "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ArduinoOTA/src",
-                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit BusIO",
+                    "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ESPmDNS/src",
+                    "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Update/src",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/lib/IP5306",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/SparkFun SGP30 Arduino Library/src",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/SparkFun SCD30 Arduino Library/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Wire/src",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/JC_Button/src",
                     "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/TJpg_Decoder/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/SD/src",
                     "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/RunningMedian",
@@ -195,8 +204,10 @@
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/fb_gfx",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/cores/esp32",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/variants/esp32",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit BusIO",
                     "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit GFX Library",
-                    "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ArduinoOTA/src",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SCD30",
+                    "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/libdeps/esp32/Adafruit SGP30 Sensor",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/AsyncUDP/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/AzureIoT/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/BLE/src",
@@ -204,7 +215,6 @@
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/DNSServer/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/EEPROM/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ESP32/src",
-                    "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/ESPmDNS/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/FFat/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/HTTPClient/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/HTTPUpdate/src",
@@ -214,16 +224,14 @@
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/SD_MMC/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/SimpleBLE/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Ticker/src",
-                    "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/Update/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/WebServer/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/WiFiClientSecure/src",
                     "/Users/willemoldemans/.platformio/packages/framework-arduinoespressif32/libraries/WiFiProv/src",
-                    "/Users/willemoldemans/.platformio/packages/tool-unity",
                     ""
                 ]
             },
             "defines": [
-                "PLATFORMIO=50101",
+                "PLATFORMIO=60001",
                 "ARDUINO_ESP32_DEV",
                 "ESP32",
                 "ESP_PLATFORM",
@@ -238,7 +246,7 @@
             ],
             "cStandard": "c99",
             "cppStandard": "c++11",
-            "compilerPath": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32/bin/xtensa-esp32-elf-gcc",
+            "compilerPath": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32@2.50200.97/bin/xtensa-esp32-elf-gcc",
             "compilerArgs": [
                 "-mlongcalls",
                 ""

.vscode/extensions.json

@@ -1,7 +1,10 @@
-{
+{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
+    // for the documentation about the extensions.json format
-    "recommendations": [
+    "recommendations": [
-        "platformio.platformio-ide"
+        "platformio.platformio-ide"
-    ]
+    ],
-}
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

.vscode/launch.json

@@ -14,7 +14,7 @@
             "name": "PIO Debug",
             "executable": "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/build/esp32/firmware.elf",
             "projectEnvName": "esp32",
-            "toolchainBinDir": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32/bin",
+            "toolchainBinDir": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32@2.50200.97/bin",
             "internalConsoleOptions": "openOnSessionStart",
             "preLaunchTask": {
                 "type": "PlatformIO",
@@ -27,8 +27,18 @@
             "name": "PIO Debug (skip Pre-Debug)",
             "executable": "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/build/esp32/firmware.elf",
             "projectEnvName": "esp32",
-            "toolchainBinDir": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32/bin",
+            "toolchainBinDir": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32@2.50200.97/bin",
             "internalConsoleOptions": "openOnSessionStart"
+        },
+        {
+            "type": "platformio-debug",
+            "request": "launch",
+            "name": "PIO Debug (without uploading)",
+            "executable": "/Users/willemoldemans/Documents/PROJECTEN/AQS-main/Firmware/PM25SensorESP32/.pio/build/esp32/firmware.elf",
+            "projectEnvName": "esp32",
+            "toolchainBinDir": "/Users/willemoldemans/.platformio/packages/toolchain-xtensa32@2.50200.97/bin",
+            "internalConsoleOptions": "openOnSessionStart",
+            "loadMode": "manual"
         }
     ]
 }

CO2_sensor.cpp

@@ -1,6 +1,7 @@
 #include "CO2_sensor.h"
 
-Adafruit_SCD30 scd30;
+//Adafruit_SCD30 scd30;
+SCD30 scd30;
 
 #define CO2_INTERVAL 120000 //ms
 #define SCD30TEMPMAX 50
@@ -8,7 +9,7 @@ Adafruit_SCD30 scd30;
 #define SCD30CO2MAX 20000
 #define SCD30MIN 0
 
-uint8_t CO2_samples = 3600 / g_pms_report_period;
+uint8_t CO2_samples = 3600 / 30;
 
 AQSSensor SCD30_temperature("Temperature", SCD30_temp, "degC", device_name, CO2_samples, SCD30MIN, SCD30TEMPMAX);
 AQSSensor SCD30_Humidity("Humidity", SCD30_hum, "%RH", device_name, CO2_samples, SCD30MIN, SDC30HUMMAX);
@@ -19,6 +20,7 @@ uint32_t CO2_lastUpdate = 0;
 void initCO2sensor(void)
 {
     Serial.println("SCD30: init");
+    Wire.begin();
     if (!scd30.begin())
     {
         Serial.println("SCD30: Failed to find sensor");
@@ -33,8 +35,8 @@ void initCO2sensor(void)
         addSensorToList(&SCD30_CO2);
 
         //check callibration Mode
-        scd30.selfCalibrationEnabled(false);
+        //scd30.selfCalibrationEnabled(false);
-        scd30.read();
+        //scd30.read();
         Serial.println("SCD30: init OK");
     }
 }
@@ -42,22 +44,21 @@ void initCO2sensor(void)
 void handleCO2sensor(void)
 {
     uint32_t currentmillis = millis();
-    if ((currentmillis - CO2_lastUpdate > (g_pms_report_period * 1000)) || (!CO2_lastUpdate) && (scd30.dataReady()))
+    if ((currentmillis - CO2_lastUpdate > (g_pms_report_period * 1000)) || (!CO2_lastUpdate))
     {
-        if (!scd30.read())
+
+        if (!scd30.dataAvailable())
         {
-            Serial.println("SCD30: read error!");
             return;
         }
 
-        SCD30_temperature.set(uint32_t(scd30.temperature));
+        SCD30_temperature.set(uint32_t(scd30.getTemperature()));
-        SCD30_Humidity.set(uint32_t(scd30.relative_humidity));
+        SCD30_Humidity.set(uint32_t(scd30.getHumidity()));
-        SCD30_CO2.set(uint32_t(scd30.CO2));
+        SCD30_CO2.set(uint32_t(scd30.getCO2()));
 
         SCD30_temperature.publish();
         SCD30_Humidity.publish();
         SCD30_CO2.publish();
-
         CO2_lastUpdate = currentmillis;
     }
 }

CO2_sensor.h

@@ -2,9 +2,11 @@
 
 #include "Arduino.h"
 #include "config.h"
+#include <wire.h>
+//#include <Adafruit_SCD30.h>
+//#include <Adafruit_Sensor.h>
+#include "SparkFun_SCD30_Arduino_Library.h" //Click here to get the library: http://librarymanager/All#SparkFun_SCD30
 
-#include <Adafruit_SCD30.h>
-#include <Adafruit_Sensor.h>
 
 #include "sensor.h"
 

VOC_sensor.cpp

@@ -1,37 +1,47 @@
 #include "VOC_sensor.h"
+#define DEBUG_SERIAL
 
-Adafruit_SGP30 sgp;
+
+//Adafruit_SGP30 sgp;
+SGP30 sgp;
+
+//TwoWire wire1(1);
 uint8_t VOC_samples = 3600 / g_pms_report_period;
 #define VOC_MIN 0
 #define VOC_MAX 10000
+#define VOC_RAW_MAX 30000
 #define VOC_INTERVAL 120000 //ms
 
 uint32_t lastVOCtime = 0;
 //sensors
 AQSSensor SGP30_tvoc("TVOC", SGP30_TVOC, "ppb", device_name, VOC_samples, VOC_MIN, VOC_MAX);
 AQSSensor SGP30_eco2("eCO2", SGP30_eCO2, "ppm", device_name, VOC_samples, VOC_MIN, VOC_MAX);
-AQSSensor SGP30_rawh2("Raw_H2", SGP30_rawH2, "#", device_name, VOC_samples, VOC_MIN, VOC_MAX);
+AQSSensor SGP30_rawh2("Raw_H2", SGP30_rawH2, "#", device_name, VOC_samples, VOC_MIN, VOC_RAW_MAX);
-AQSSensor SGP30_rawethanol("Raw_Ethanol", SGP30_rawEthanol, "#", device_name, VOC_samples, VOC_MIN, VOC_MAX);
+AQSSensor SGP30_rawethanol("Raw_Ethanol", SGP30_rawEthanol, "#", device_name, VOC_samples, VOC_MIN, VOC_RAW_MAX);
 
 void initVOCsensor(void)
 {
   Serial.println("VOCSensor: Init SGP30: ");
-
+  //wire1.setPins(I2C_2_SDA, I2C_2_SCL);
+  //if (!sgp.begin(&wire1))
+  Wire.begin();
   if (!sgp.begin())
   {
     Serial.println("VOCSensor: Init Failed (SGP30 not found)");
   }
   else
   {
-    Serial.printf("VOCSensor: serial =0x%X%X%X\n", sgp.serialnumber[0], sgp.serialnumber[1], sgp.serialnumber[2]);
+    sgp.getSerialID();
+    //Get version number
+    sgp.getFeatureSetVersion();
+    Serial.print("VOCSensor: serial =0x");
+    Serial.println((unsigned long)sgp.serialID, HEX);
     addSensorToList(&SGP30_tvoc);
     addSensorToList(&SGP30_eco2);
-    addSensorToList(&SGP30_rawh2);
-    addSensorToList(&SGP30_rawethanol);
 
-    sgp.IAQmeasure();
+    sgp.initAirQuality();
-    sgp.IAQmeasureRaw();
+    sgp.measureAirQuality();
-    
+
     Serial.println("VOCSensor: Init OK");
   }
 }
@@ -41,28 +51,13 @@ void handleVOCsensor(void)
   uint32_t timenow = millis();
   if ((timenow - lastVOCtime > VOC_INTERVAL) || !lastVOCtime)
   {
-    if (!sgp.IAQmeasure())
+    sgp.measureAirQuality();
-    {
+
-      Serial.println("VOCSensor: Measurement failed");
-      return;
-    }
     SGP30_tvoc.set(sgp.TVOC);
-    SGP30_eco2.set(sgp.eCO2);
+    SGP30_eco2.set(sgp.CO2);
 
     SGP30_tvoc.publish();
-SGP30_eco2.publish();
+    SGP30_eco2.publish();
-
-    if (!sgp.IAQmeasureRaw())
-    {
-      Serial.println("VOCSensor: Raw Measurement failed");
-      return;
-    }
-
-    SGP30_rawethanol.set(sgp.rawEthanol);
-    SGP30_rawh2.set(sgp.rawH2);
-
-    SGP30_rawethanol.publish();
-    SGP30_rawh2.publish();
 
     lastVOCtime = timenow;
   }

VOC_sensor.h

@@ -3,8 +3,11 @@
 #include "Arduino.h"
 #include "config.h"
 #include "sensor.h"
+#include <Wire.h>
 
-#include "Adafruit_SGP30.h"
+//#include "Adafruit_SGP30.h"
+#include "SparkFun_SGP30_Arduino_Library.h" // Click here to get the library: http://librarymanager/All#SparkFun_SGP30
+#include <Wire.h>
 
 
 void initVOCsensor(void);

battery.cpp

@@ -0,0 +1,10 @@
+#include "battery.h"
+
+void initBattery(void)
+{
+  
+}
+void handleBattery(void)
+{
+
+}

battery.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#include "Arduino.h"
+#include "IP5306.h"
+
+void initBattery(void);
+void handleBattery(void);

button.h

@@ -2,6 +2,8 @@
 
 #include "Arduino.h"
 #include "config.h"
+#include "lcd.h"
+#include "JC_Button.h"
 
 void initButtons( void );
 void handleButtons( void );

buttons.cpp

@@ -6,16 +6,45 @@ uint8_t g_previous_mode_button_state = 1;
 uint32_t g_last_debounce_time = 0;
 uint32_t g_debounce_delay = 50;
 
+Button buttonCenter(BUTTON_CENTER);
+Button buttonLeft(BUTTON_LEFT);
+Button buttonRight(BUTTON_RIGHT);
+
 void initButtons(void)
 {
   Serial.print("initButtons:");
+  buttonCenter.begin();
+  buttonLeft.begin();
+  buttonRight.begin();
+
   pinMode(MODE_BUTTON_PIN, INPUT_PULLUP); // Pin for switching screens button
   Serial.println(" OK");
 }
 
 void handleButtons(void)
 {
-  g_previous_mode_button_state = g_current_mode_button_state;
+  //handle buttons
+  buttonCenter.read();
+  buttonLeft.read();
+  buttonRight.read();
+
+  if (buttonCenter.wasPressed())
+  {
+    backlightRefresh();
+  }
+
+  if (buttonLeft.wasPressed())
+  {
+    previousSensor();
+    backlightRefresh();
+  }
+
+  if (buttonRight.wasPressed())
+  {
+    nextSensor();
+    backlightRefresh();
+  }
+
   g_current_mode_button_state = digitalRead(MODE_BUTTON_PIN);
 
   // Check if button is now pressed and it was previously unpressed
@@ -27,6 +56,7 @@ void handleButtons(void)
       return;
     }
     Serial.println("Button pressed");
+    backlightRefresh();
     // Increment display state
     g_last_debounce_time = millis();
   }

config.h

@@ -4,9 +4,9 @@
 /* WiFi config */
 #define WIFI_SSID                   "poes"   // Your WiFi SSID
 #define WIFI_PASSWORD               "Rijnstraat214"     // Your WiFi password
-
+#define HOST_NAME                   "AQS-monitor"
 /* MQTT */
-#define mqtt_broker            "192.168.2.5" // IP address of your MQTT broker
+#define mqtt_broker            "192.168.2.3" // IP address of your MQTT broker
 #define     REPORT_MQTT_SEPARATE  true               // Report each value to its own topic
 #define     REPORT_MQTT_JSON      true               // Report all values in a JSON message
 #define status_topic           "events"        // MQTT topic to report startup
@@ -16,9 +16,6 @@
 #define    g_pms_warmup_period     30             // Seconds to warm up PMS before reading
 #define    g_pms_report_period    120             // Seconds between reports
 
-/* Use WiFi. If this is off, MQTT won't run */
-#define    ENABLE_WIFI       true
-
 /* Serial */
 #define     SERIAL_BAUD_RATE       115200              // Speed for USB serial console
 
@@ -27,28 +24,25 @@
 
 /* ----------------- Hardware-specific Config ---------------------- */
 /* Mode button connection (momentary between this pin and GND) */
-#define MODE_BUTTON_PIN    0
+#define MODE_BUTTON_PIN       0
+#define BUTTON_CENTER         37
+#define BUTTON_RIGHT          39
+#define BUTTON_LEFT           38
+#define I2C_SDA_PIN           21
+#define I2C_SCL_PIN           22
+#define I2C_2_SCL             13
+#define I2C_2_SDA             14
+#define PMS_RX_PIN            19 //  Tx to the PMS SHOULD BE 16
+#define PMS_TX_PIN            26 //  Rx from the PMS SHOULD BE 17
+#define TFT_BL                4            // LED back-light control pin
 
-/* RGB LEDs */
-#define WS2812B_PIN       13
-#define NUM_RGB_LEDS       0
 
-/* LCD */
+//backlight defines
-// #define TFT_DC_PIN         2
+#define TFT_BACKLIGHT_ON HIGH  // Level to turn ON back-light (HIGH or LOW)
-// #define TFT_RST_PIN        4
+#define TFT_BL_PWMCHANNEL   1
-// #define TFT_CS_PIN        26
+#define TFT_BL_FREQ         5000
-// #define TFT_SCLK_PIN      18
+#define TFT_BL_BITS         8
-// #define TFT_MISO_PIN      19
-// #define TFT_MOSI_PIN      23
-
-/* I2C */
-#define I2C_SDA_PIN       21
-#define I2C_SCL_PIN       22
-//#define BME680_I2C_ADDR 0x76
 
 /* Particulate Matter Sensor */
 #define PMS_BAUD_RATE   9600
-#define PMS_SET_PIN       19
+
-#define PMS_RESET_PIN     26
-#define PMS_RX_PIN         4 //  Tx to the PMS SHOULD BE 16
-#define PMS_TX_PIN        14 //  Rx from the PMS SHOULD BE 17

esp_ota.cpp

@@ -0,0 +1,46 @@
+#include "esp_ota.h"
+
+void initEspOta(void)
+{
+  Serial.println("ESPOTA: init");
+  ArduinoOTA
+    .onStart([]() {
+      String type;
+      if (ArduinoOTA.getCommand() == U_FLASH)
+        type = "sketch";
+      else // U_SPIFFS
+        type = "filesystem";
+
+      // NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
+      Serial.println("ESPOTA: Start updating " + type);
+      ProgressbarVisible(true);
+      ledcWrite(TFT_BL_PWMCHANNEL, 64);
+    })
+    .onEnd([]() {
+      Serial.println("\nESPOTA: End");
+    })
+    .onProgress([](unsigned int progress, unsigned int total) {
+      Serial.printf("ESPOTA: Progress: %u%%\r", (progress / (total / 100)));
+      setOTAProgress((progress / (total / 100)));
+    })
+    .onError([](ota_error_t error) {
+      Serial.printf("ESPOTA: Error[%u]: ", error);
+      if (error == OTA_AUTH_ERROR) Serial.println("ESPOTA: Auth Failed");
+      else if (error == OTA_BEGIN_ERROR) Serial.println("ESPOTA: Begin Failed");
+      else if (error == OTA_CONNECT_ERROR) Serial.println("ESPOTA: Connect Failed");
+      else if (error == OTA_RECEIVE_ERROR) Serial.println("ESPOTA: Receive Failed");
+      else if (error == OTA_END_ERROR) Serial.println("ESPOTA: End Failed");
+    });
+
+  ArduinoOTA.begin();
+
+  Serial.print("ESPOTA: IP address: ");
+  Serial.println(WiFi.localIP());
+  Serial.println("ESPOTA: init OK");
+
+}
+
+void handleEspOta(void)
+{
+  ArduinoOTA.handle();
+}

esp_ota.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#include "Arduino.h"
+#include <ArduinoOTA.h>
+#include "lcd.h"
+
+void initEspOta(void);
+void handleEspOta(void);

lcd.cpp

@@ -1,25 +1,5 @@
 #include "lcd.h"
 
-// This example draws an animated dial with a rotating needle.
-
-// The dial is a jpeg image, the needle is created using a rotated
-// Sprite. The example operates by reading blocks of pixels from the
-// TFT, thus the TFT setup must support reading from the TFT CGRAM.
-
-// The sketch operates by creating a copy of the screen block where
-// the needle will be drawn, the needle is then drawn on the screen.
-// When the needle moves, the original copy of the sreen area is
-// pushed to the screen to over-write the needle graphic. A copy
-// of the screen where the new position will be drawn is then made
-// before drawing the needle in the new postion. This technique
-// allows the needle to move over other screen graphics.
-
-// The sketch calculates the size of the buffer memory required and
-// reserves the memory for the TFT block copy.
-
-// Created by Bodmer 17/3/20 as an example to the TFT_eSPI library:
-// https://github.com/Bodmer/TFT_eSPI
-
 #define NEEDLE_LENGTH 35         // Visible length
 #define NEEDLE_WIDTH 5           // Width of needle - make it an odd number
 #define NEEDLE_RADIUS 90         // Radius at tip
@@ -28,33 +8,58 @@
 #define DIAL_CENTRE_X 120
 #define DIAL_CENTRE_Y 120
 
-// Font attached to this sketch
+#define MAXGUAGE 240
-#include "NotoSansBold36.h"
+#define MINGUAGE 0
+#define DISPLAY_ROTATE 15 //sec
+
+#define BACKLIGHTTIMEOUT 60000
+#define BACKLIGHTONBRGT 84
+#define BACKLIGHTSTEP 1
+
 #define AA_FONT_LARGE NotoSansBold36
 
-#include <TFT_eSPI.h>
+enum DISPLAY_STATE
+{
+  DISPLAY_PM1P0,
+  DISPLAY_PM2P5,
+  DISPLAY_PM10P0,
+  DISPLAY_TEMP,
+  DISPLAY_HUM,
+  DISPLAY_CO2,
+  DISPLAY_LAST
+};
+
+// sprite elements
 TFT_eSPI tft = TFT_eSPI();
 TFT_eSprite needle = TFT_eSprite(&tft); // Sprite object for needle
 TFT_eSprite spr = TFT_eSprite(&tft);    // Sprite for meter reading
 TFT_eSprite nameSpr = TFT_eSprite(&tft);
 TFT_eSprite unitSpr = TFT_eSprite(&tft);
-
+TFT_eSprite ProgressBar = TFT_eSprite(&tft);
-// Jpeg image array attached to this sketch
-#include "dial.h"
-
-// Include the jpeg decoder library
-#include <TJpg_Decoder.h>
 
 uint16_t *tft_buffer;
 bool buffer_loaded = false;
 uint16_t spr_width = 0;
 uint16_t name_spr_width = 0;
+bool progessbarActive = false;
 
-void createNeedle(void);
+DISPLAY_STATE displaystate = DISPLAY_PM1P0;
-void plotNeedle(int16_t angle, uint16_t ms_delay);
+uint32_t display_last_update = 0;
+
+uint32_t backlightTimeout = 0;
+uint8_t backlightBrightness = BACKLIGHTONBRGT;
 
 // =======================================================================================
-// This function will be called during decoding of the jpeg file
+// Declarations
+// =======================================================================================
+void createNeedle(void);
+void plotNeedle(int16_t angle, uint16_t ms_delay);
+void setBacklight(uint8_t value);
+bool tft_output(int16_t x, int16_t y, uint16_t w, uint16_t h, uint16_t *bitmap);
+void backlightRefresh(void);
+
+// =======================================================================================
+// implementation
 // =======================================================================================
 bool tft_output(int16_t x, int16_t y, uint16_t w, uint16_t h, uint16_t *bitmap)
 {
@@ -69,200 +74,37 @@ bool tft_output(int16_t x, int16_t y, uint16_t w, uint16_t h, uint16_t *bitmap)
   return 1;
 }
 
-// =======================================================================================
+void setBacklight(uint8_t value)
-// Setup
-// =======================================================================================
-void initLCD()
 {
-  Serial.print("InitLCD:");
+  ledcWrite(TFT_BL_PWMCHANNEL, value);
-  // The byte order can be swapped (set true for TFT_eSPI)
-  TJpgDec.setSwapBytes(true);
-
-  // The jpeg decoder must be given the exact name of the rendering function above
-  TJpgDec.setCallback(tft_output);
-
-  tft.begin();
-  tft.setRotation(0);
-  tft.fillScreen(TFT_BLACK);
-
-  // Draw the dial
-  TJpgDec.drawJpg(0, 0, dial, sizeof(dial));
-  tft.drawCircle(DIAL_CENTRE_X, DIAL_CENTRE_Y, NEEDLE_RADIUS - NEEDLE_LENGTH, TFT_DARKGREY);
-
-  // Load the font and create the Sprite for reporting the value
-  spr.loadFont(AA_FONT_LARGE);
-  spr_width = spr.textWidth("277");
-  spr.createSprite(spr_width, spr.fontHeight());
-  uint16_t bg_color = tft.readPixel(120, 120); // Get colour from dial centre
-  spr.fillSprite(bg_color);
-  spr.setTextColor(TFT_WHITE, bg_color);
-  spr.setTextDatum(MC_DATUM);
-  spr.setTextPadding(spr_width);
-  spr.drawNumber(0, spr_width / 2, spr.fontHeight() / 2);
-  spr.pushSprite(DIAL_CENTRE_X - spr_width / 2, DIAL_CENTRE_Y - spr.fontHeight() / 2);
-
-  // Plot the label text
-  nameSpr.setTextFont(3);
-  name_spr_width = nameSpr.textWidth("Temperature");
-  nameSpr.createSprite(name_spr_width, nameSpr.fontHeight() * 2 + 2);
-  nameSpr.fillSprite(bg_color);
-  nameSpr.setTextColor(TFT_WHITE, bg_color);
-  nameSpr.setTextDatum(MC_DATUM);
-  nameSpr.setTextPadding(name_spr_width);
-  nameSpr.drawString("Sensor Name", name_spr_width / 2, nameSpr.fontHeight() / 2);
-  nameSpr.drawString("Unit", name_spr_width / 2, nameSpr.fontHeight() / 2 * 3 + 2);  nameSpr.pushSprite(DIAL_CENTRE_X - name_spr_width / 2, DIAL_CENTRE_Y + 40, 2);
-  nameSpr.pushSprite(DIAL_CENTRE_X - name_spr_width / 2, DIAL_CENTRE_Y + 40, 2);
-
-  // Define where the needle pivot point is on the TFT before
-  // creating the needle so boundary calculation is correct
-  tft.setPivot(DIAL_CENTRE_X, DIAL_CENTRE_Y);
-
-  // Create the needle Sprite
-  createNeedle();
-
-  // Reset needle position to 0
-  plotNeedle(0, 0, 0);
-
-  delay(2000);
-  Serial.println("OK");
 }
 
-// =======================================================================================
+void ProgressbarVisible(bool visible)
-// Loop
-// =======================================================================================
-enum DISPLAY_STATE
 {
-  DISPLAY_PM1P0,
+  progessbarActive = visible;
-  DISPLAY_PM2P5,
+  if (!visible)
-  DISPLAY_PM10P0,
-  DISPLAY_TEMP,
-  DISPLAY_HUM,
-  DISPLAY_CO2,
-  DISPLAY_LAST
-};
-
-DISPLAY_STATE displaystate = DISPLAY_PM1P0;
-uint32_t display_last_update = 0;
-
-#define MAXGUAGE 240
-#define MINGUAGE 0
-#define DISPLAY_ROTATE 10 //sec
-
-void handleLCD()
-{
-  static uint32_t value;
-  static uint16_t angle;
-  DISPLAY_STATE displaystate_next = DISPLAY_PM1P0;
-  sensor_e nextSensor = AE_1P0;
-
-  switch (displaystate)
   {
-  case DISPLAY_PM1P0:
+    ProgressBar.fillSprite(TFT_BLACK);
-  {
+    ProgressBar.pushSprite(10, 270);
-    nextSensor = AE_1P0;
-    displaystate_next = DISPLAY_PM2P5;
   }
-  break;
-  case DISPLAY_PM2P5:
-  {
-    nextSensor = AE_2P5;
-    displaystate_next = DISPLAY_PM10P0;
-  }
-  break;
-  case DISPLAY_PM10P0:
-  {
-    nextSensor = AE_10P0;
-    displaystate_next = DISPLAY_TEMP;
-  }
-  break;
-  case DISPLAY_TEMP:
-  {
-    nextSensor = SCD30_temp;
-    displaystate_next = DISPLAY_HUM;
-  }
-  break;
-  case DISPLAY_HUM:
-  {
-    nextSensor = SCD30_hum;
-    displaystate_next = DISPLAY_CO2;
-  }
-  break;
-  case DISPLAY_CO2:
-  {
-    nextSensor = SCD30_hum;
-    displaystate_next = DISPLAY_PM1P0;
-  }
-  break;
-
-  case DISPLAY_LAST:
-  default:
-  {
-    displaystate_next = DISPLAY_PM1P0;
-  }
-  break;
-  }
-  //rotate display
-  uint32_t timenow = millis();
-  if (timenow - display_last_update > (DISPLAY_ROTATE * 1000))
-  {
-    displaystate = displaystate_next;
-    display_last_update = timenow;
-    Serial.println("LCD next State");
-  }
-  //calculate value to angle
-
-  AQSSensor *sensor = getSensor(nextSensor);
-  if (sensor == NULL)
-  {
-    Serial.println("LCD: getSensor=NULL!");
-    return;
-  }
-
-  angle = map(value, sensor->getMin(), sensor->getMax(), MINGUAGE, MAXGUAGE);
-
-  plotNeedle(angle, 15, value);
-
-  nameSpr.drawString(sensor->getName().c_str(), name_spr_width / 2, nameSpr.fontHeight() / 2);
-  nameSpr.drawString(sensor->getUnit().c_str(), name_spr_width / 2, nameSpr.fontHeight() / 2 * 3 + 2);
-  nameSpr.pushSprite(DIAL_CENTRE_X - name_spr_width / 2, DIAL_CENTRE_Y + 40, 2);
 }
 
-// =======================================================================================
+void setOTAProgress(uint8_t value)
-// Create the needle Sprite
-// =======================================================================================
-void createNeedle(void)
 {
-  needle.setColorDepth(16);
+  uint16_t progress = map(value, 0, 100, 0, 212);
-  needle.createSprite(NEEDLE_WIDTH, NEEDLE_LENGTH); // create the needle Sprite
+  ProgressBar.drawRoundRect(0, 2, 220, 22, 5, TFT_BLUE);
-
+  ProgressBar.fillRoundRect(4, 5, progress, 15, 3, TFT_BLUE);
-  needle.fillSprite(TFT_BLACK); // Fill with black
+  if (progessbarActive)
-
+  {
-  // Define needle pivot point relative to top left corner of Sprite
+    ProgressBar.pushSprite(10, 270);
-  uint16_t piv_x = NEEDLE_WIDTH / 2; // pivot x in Sprite (middle)
+  }
-  uint16_t piv_y = NEEDLE_RADIUS;    // pivot y in Sprite
+}
-  needle.setPivot(piv_x, piv_y);     // Set pivot point in this Sprite
+
-
+void backlightRefresh(void)
-  // Draw the red needle in the Sprite
+{
-  needle.fillRect(0, 0, NEEDLE_WIDTH, NEEDLE_LENGTH, TFT_MAROON);
+  backlightTimeout = millis();
-  needle.fillRect(1, 1, NEEDLE_WIDTH - 2, NEEDLE_LENGTH - 2, TFT_RED);
-
-  // Bounding box parameters to be populated
-  int16_t min_x;
-  int16_t min_y;
-  int16_t max_x;
-  int16_t max_y;
-
-  // Work out the worst case area that must be grabbed from the TFT,
-  // this is at a 45 degree rotation
-  needle.getRotatedBounds(45, &min_x, &min_y, &max_x, &max_y);
-
-  // Calculate the size and allocate the buffer for the grabbed TFT area
-  tft_buffer = (uint16_t *)malloc(((max_x - min_x) + 2) * ((max_y - min_y) + 2) * 2);
 }
 
-// =======================================================================================
-// Move the needle to a new position
-// =======================================================================================
 void plotNeedle(int16_t angle, uint16_t ms_delay, uint32_t value)
 {
   static int16_t old_angle = -120; // Starts at -120 degrees
@@ -283,7 +125,6 @@ void plotNeedle(int16_t angle, uint16_t ms_delay, uint32_t value)
   // Move the needle until new angle reached
   while (angle != old_angle || !buffer_loaded)
   {
-
     if (old_angle < angle)
       old_angle++;
     else
@@ -323,3 +164,236 @@ void plotNeedle(int16_t angle, uint16_t ms_delay, uint32_t value)
 }
 
 // =======================================================================================
+// Setup
+// =======================================================================================
+void createProgressBar(void)
+{
+  ProgressBar.createSprite(220, 30);
+  ProgressBar.fillSprite(TFT_BLACK);
+  ProgressBar.drawRoundRect(0, 2, 220, 22, 5, TFT_BLUE);
+  ProgressBar.pushSprite(10, 270);
+}
+
+void createNameSprite(void)
+{
+  nameSpr.setTextFont(2);
+  name_spr_width = nameSpr.textWidth("---Sensor Name---");
+  nameSpr.createSprite(name_spr_width, nameSpr.fontHeight() * 2 + 2);
+  uint16_t bg_color = tft.readPixel(120, 120); // Get colour from dial centre
+
+  nameSpr.fillSprite(bg_color);
+  nameSpr.setTextColor(TFT_WHITE, bg_color);
+  nameSpr.setTextDatum(MC_DATUM);
+  nameSpr.setTextPadding(name_spr_width);
+  nameSpr.drawString("Sensor Name", name_spr_width / 2, nameSpr.fontHeight() / 2);
+  nameSpr.drawString("Unit", name_spr_width / 2, nameSpr.fontHeight() / 2 * 3 + 2);
+  nameSpr.pushSprite(DIAL_CENTRE_X - name_spr_width / 2, DIAL_CENTRE_Y + 40, 2);
+}
+
+void createValueSprinte(void)
+{
+  spr.loadFont(AA_FONT_LARGE);
+  spr_width = spr.textWidth("277");
+  spr.createSprite(spr_width, spr.fontHeight());
+  uint16_t bg_color = tft.readPixel(120, 120); // Get colour from dial centre
+  spr.fillSprite(bg_color);
+  spr.setTextColor(TFT_WHITE, bg_color);
+  spr.setTextDatum(MC_DATUM);
+  spr.setTextPadding(spr_width);
+  spr.drawNumber(0, spr_width / 2, spr.fontHeight() / 2);
+  spr.pushSprite(DIAL_CENTRE_X - spr_width / 2, DIAL_CENTRE_Y - spr.fontHeight() / 2);
+}
+
+void createNeedle(void)
+{
+  needle.setColorDepth(16);
+  needle.createSprite(NEEDLE_WIDTH, NEEDLE_LENGTH); // create the needle Sprite
+
+  needle.fillSprite(TFT_BLACK); // Fill with black
+
+  // Define needle pivot point relative to top left corner of Sprite
+  uint16_t piv_x = NEEDLE_WIDTH / 2; // pivot x in Sprite (middle)
+  uint16_t piv_y = NEEDLE_RADIUS;    // pivot y in Sprite
+  needle.setPivot(piv_x, piv_y);     // Set pivot point in this Sprite
+
+  // Draw the red needle in the Sprite
+  needle.fillRect(0, 0, NEEDLE_WIDTH, NEEDLE_LENGTH, TFT_MAROON);
+  needle.fillRect(1, 1, NEEDLE_WIDTH - 2, NEEDLE_LENGTH - 2, TFT_RED);
+
+  // Bounding box parameters to be populated
+  int16_t min_x;
+  int16_t min_y;
+  int16_t max_x;
+  int16_t max_y;
+
+  // Work out the worst case area that must be grabbed from the TFT,
+  // this is at a 45 degree rotation
+  needle.getRotatedBounds(45, &min_x, &min_y, &max_x, &max_y);
+
+  // Calculate the size and allocate the buffer for the grabbed TFT area
+  tft_buffer = (uint16_t *)malloc(((max_x - min_x) + 2) * ((max_y - min_y) + 2) * 2);
+}
+
+void createDail(void)
+{
+  TJpgDec.setSwapBytes(true);
+
+  // The jpeg decoder must be given the exact name of the rendering function above
+  TJpgDec.setCallback(tft_output);
+  // Draw the dial
+  TJpgDec.drawJpg(0, 0, dial, sizeof(dial));
+  tft.drawCircle(DIAL_CENTRE_X, DIAL_CENTRE_Y, NEEDLE_RADIUS - NEEDLE_LENGTH, TFT_DARKGREY);
+
+  // Define where the needle pivot point is on the TFT before
+  // creating the needle so boundary calculation is correct
+  tft.setPivot(DIAL_CENTRE_X, DIAL_CENTRE_Y);
+}
+
+void initLCD()
+{
+  Serial.print("InitLCD:");
+  // The byte order can be swapped (set true for TFT_eSPI)
+
+  tft.begin();
+  tft.setRotation(0);
+  tft.fillScreen(TFT_BLACK);
+
+  // Create the Sprites
+  createProgressBar();
+  createDail();
+  createValueSprinte();
+  createNeedle();
+  createNameSprite();
+
+  ledcSetup(TFT_BL_PWMCHANNEL, TFT_BL_FREQ, TFT_BL_BITS);
+  ledcAttachPin(TFT_BL, TFT_BL_PWMCHANNEL);
+  ledcWrite(TFT_BL_PWMCHANNEL, BACKLIGHTONBRGT);
+
+  // Reset needle position to 0
+  plotNeedle(0, 0, 0);
+
+  Serial.println("OK");
+}
+
+// =======================================================================================
+// Loop
+// =======================================================================================
+void handleBacklight(void)
+{
+  uint32_t timeNow = millis();
+  if (!backlightTimeout)
+  {
+    backlightRefresh();
+  }
+  if (timeNow - backlightTimeout > BACKLIGHTTIMEOUT)
+  {
+    if (backlightBrightness > BACKLIGHTSTEP)
+    {
+      backlightBrightness -= BACKLIGHTSTEP;
+    }
+    else
+    {
+      backlightBrightness = 0;
+    }
+  }
+  else
+  {
+    if (backlightBrightness < BACKLIGHTONBRGT)
+    {
+      backlightBrightness += BACKLIGHTSTEP;
+    }
+  }
+  ledcWrite(TFT_BL_PWMCHANNEL, backlightBrightness);
+}
+
+sensor_e displaySensor[] =
+    {
+        AE_1P0,
+        AE_2P5,
+        AE_10P0,
+        SCD30_temp,
+        SCD30_hum,
+        SCD30_co2,
+        SGP30_TVOC,
+};
+
+uint8_t displaySensorSize = 7;
+
+uint8_t displaySensorIndex = 0;
+
+void nextSensor(void)
+{
+  if (displaySensorIndex < displaySensorSize - 1)
+  {
+    displaySensorIndex++;
+  }
+  else
+  {
+    displaySensorIndex = 0;
+  }
+  display_last_update = millis();
+}
+
+void previousSensor(void)
+{
+  if (displaySensorIndex > 0)
+  {
+    displaySensorIndex--;
+  }
+  else
+  {
+    displaySensorIndex = displaySensorSize - 1;
+  }
+  display_last_update = millis();
+}
+
+void handleplotSensor(void)
+{
+  if(!backlightBrightness)
+  {
+    return;
+  }
+
+  AQSSensor *sensor = getSensor(displaySensor[displaySensorIndex]);
+  if (sensor == NULL)
+  {
+    Serial.println("LCD: getSensor=NULL!");
+    nextSensor();
+    return;
+  }
+
+  uint16_t angle = map(sensor->value(), sensor->getMin(), sensor->getMax(), MINGUAGE, MAXGUAGE);
+
+  plotNeedle(angle, 15, sensor->value());
+
+  nameSpr.drawString(sensor->getName().c_str(), name_spr_width / 2, nameSpr.fontHeight() / 2);
+  nameSpr.drawString(sensor->getUnit().c_str(), name_spr_width / 2, nameSpr.fontHeight() / 2 * 3 + 2);
+  nameSpr.pushSprite(DIAL_CENTRE_X - name_spr_width / 2, DIAL_CENTRE_Y + 40, 2);
+}
+
+void handleDisplayRotate(void)
+{
+  //rotate display
+  if(!backlightBrightness)
+  {
+    return;
+  }
+
+  uint32_t timenow = millis();
+  if (timenow - display_last_update > (DISPLAY_ROTATE * 1000))
+  {
+    Serial.println("LCD next State");
+    nextSensor();
+  }
+}
+
+void handleLCD()
+{
+  handleDisplayRotate();
+
+  handleplotSensor();
+
+  handleBacklight();
+}
+
+// =======================================================================================

lcd.h

@@ -3,7 +3,18 @@
 #include "Arduino.h"
 #include "sensor.h"
 
+#include "NotoSansBold36.h"
+#include <TFT_eSPI.h>
+#include "dial.h"
+#include <TJpg_Decoder.h>
+
 void initLCD();
 void handleLCD();
 
 void plotNeedle(int16_t angle, uint16_t ms_delay, uint32_t value);
+void setOTAProgress(uint8_t value);
+void ProgressbarVisible(bool visible);
+
+void backlightRefresh(void);
+void nextSensor(void);
+void previousSensor(void);

lib/IP5306/IP5306.cpp

@@ -0,0 +1,50 @@
+/*
+  IP5306.cpp - Library for IP5306_I2C Power controller.
+  Created by Sebastian Haap, December 3, 2019.
+  Based on https://gist.github.com/me-no-dev/7702f08dd578de5efa47caf322250b57
+*/
+
+#include "Wire.h"
+#include "IP5306.h"
+
+int ip5306_get_reg(uint8_t reg){
+    Wire.beginTransmission(0x75);
+    Wire.write(reg);
+    if(Wire.endTransmission(false) == 0 && Wire.requestFrom(0x75, 1)){
+        return Wire.read();
+    }
+    return -1;
+}
+
+int ip5306_set_reg(uint8_t reg, uint8_t value){
+    Wire.beginTransmission(0x75);
+    Wire.write(reg);
+    Wire.write(value);
+    if(Wire.endTransmission(true) == 0){
+        return 0;
+    }
+    return -1;
+}
+
+uint8_t ip5306_get_bits(uint8_t reg, uint8_t index, uint8_t bits){
+    int value = ip5306_get_reg(reg);
+    if(value < 0){
+        //Serial.printf("ip5306_get_bits fail: 0x%02x\n", reg);
+        return 0;
+    }
+    return (value >> index) & ((1 << bits)-1);
+}
+
+void ip5306_set_bits(uint8_t reg, uint8_t index, uint8_t bits, uint8_t value){
+    uint8_t mask = (1 << bits) - 1;
+    int v = ip5306_get_reg(reg);
+    if(v < 0){
+        //Serial.printf("ip5306_get_reg fail: 0x%02x\n", reg);
+        return;
+    }
+    v &= ~(mask << index);
+    v |= ((value & mask) << index);
+    if(ip5306_set_reg(reg, v)){
+        //Serial.printf("ip5306_set_bits fail: 0x%02x\n", reg);
+    }
+}

lib/IP5306/IP5306.h

@@ -0,0 +1,110 @@
+/*
+  IP5306.h - Library for IP5306_I2C Power controller.
+  Created by Sebastian Haap, December 3, 2019.
+  Based on https://gist.github.com/me-no-dev/7702f08dd578de5efa47caf322250b57
+*/
+
+#ifndef IP5306_h
+#define IP5306_h
+
+#include "Wire.h"
+
+#define IP5306_REG_SYS_0    0x00
+#define IP5306_REG_SYS_1    0x01
+#define IP5306_REG_SYS_2    0x02
+#define IP5306_REG_CHG_0    0x20
+#define IP5306_REG_CHG_1    0x21
+#define IP5306_REG_CHG_2    0x22
+#define IP5306_REG_CHG_3    0x23
+#define IP5306_REG_CHG_4    0x24
+#define IP5306_REG_READ_0   0x70
+#define IP5306_REG_READ_1   0x71
+#define IP5306_REG_READ_2   0x72
+#define IP5306_REG_READ_3   0x77
+#define IP5306_REG_READ_4   0x78
+
+#define IP5306_GetKeyOffEnabled()               ip5306_get_bits(IP5306_REG_SYS_0, 0, 1)
+#define IP5306_SetKeyOffEnabled(v)              ip5306_set_bits(IP5306_REG_SYS_0, 0, 1, v)//0:dis,*1:en
+
+#define IP5306_GetBoostOutputEnabled()          ip5306_get_bits(IP5306_REG_SYS_0, 1, 1)
+#define IP5306_SetBoostOutputEnabled(v)         ip5306_set_bits(IP5306_REG_SYS_0, 1, 1, v)//*0:dis,1:en
+
+#define IP5306_GetPowerOnLoadEnabled()          ip5306_get_bits(IP5306_REG_SYS_0, 2, 1)
+#define IP5306_SetPowerOnLoadEnabled(v)         ip5306_set_bits(IP5306_REG_SYS_0, 2, 1, v)//0:dis,*1:en
+
+#define IP5306_GetChargerEnabled()              ip5306_get_bits(IP5306_REG_SYS_0, 4, 1)
+#define IP5306_SetChargerEnabled(v)             ip5306_set_bits(IP5306_REG_SYS_0, 4, 1, v)//0:dis,*1:en
+
+#define IP5306_GetBoostEnabled()                ip5306_get_bits(IP5306_REG_SYS_0, 5, 1)
+#define IP5306_SetBoostEnabled(v)               ip5306_set_bits(IP5306_REG_SYS_0, 5, 1, v)//0:dis,*1:en
+
+#define IP5306_GetLowBatShutdownEnable()        ip5306_get_bits(IP5306_REG_SYS_1, 0, 1)
+#define IP5306_SetLowBatShutdownEnable(v)       ip5306_set_bits(IP5306_REG_SYS_1, 0, 1, v)//0:dis,*1:en
+
+#define IP5306_GetBoostAfterVin()               ip5306_get_bits(IP5306_REG_SYS_1, 2, 1)
+#define IP5306_SetBoostAfterVin(v)              ip5306_set_bits(IP5306_REG_SYS_1, 2, 1, v)//0:Closed, *1:Open
+
+#define IP5306_GetShortPressBoostSwitchEnable() ip5306_get_bits(IP5306_REG_SYS_1, 5, 1)
+#define IP5306_SetShortPressBoostSwitchEnable(v) ip5306_set_bits(IP5306_REG_SYS_1, 5, 1, v)//*0:disabled, 1:enabled
+
+#define IP5306_GetFlashlightClicks()            ip5306_get_bits(IP5306_REG_SYS_1, 6, 1)
+#define IP5306_SetFlashlightClicks(v)           ip5306_set_bits(IP5306_REG_SYS_1, 6, 1, v)//*0:short press twice, 1:long press
+
+#define IP5306_GetBoostOffClicks()              ip5306_get_bits(IP5306_REG_SYS_1, 7, 1)
+#define IP5306_SetBoostOffClicks(v)             ip5306_set_bits(IP5306_REG_SYS_1, 7, 1, v)//*0:long press, 1:short press twice
+
+#define IP5306_GetLightLoadShutdownTime()       ip5306_get_bits(IP5306_REG_SYS_2, 2, 2)
+#define IP5306_SetLightLoadShutdownTime(v)      ip5306_set_bits(IP5306_REG_SYS_2, 2, 2, v)//0:8s, *1:32s, 2:16s, 3:64s
+
+#define IP5306_GetLongPressTime()               ip5306_get_bits(IP5306_REG_SYS_2, 4, 1)
+#define IP5306_SetLongPressTime(v)              ip5306_set_bits(IP5306_REG_SYS_2, 4, 1, v)//*0:2s, 1:3s
+
+#define IP5306_GetChargingFullStopVoltage()     ip5306_get_bits(IP5306_REG_CHG_0, 0, 2)
+#define IP5306_SetChargingFullStopVoltage(v)    ip5306_set_bits(IP5306_REG_CHG_0, 0, 2, v)//0:4.14V, *1:4.17V, 2:4.185V, 3:4.2V (values are for charge cutoff voltage 4.2V, 0 or 1 is recommended)
+
+#define IP5306_GetChargeUnderVoltageLoop()      ip5306_get_bits(IP5306_REG_CHG_1, 2, 3)   //Automatically adjust the charging current when the voltage of VOUT is greater than the set value
+#define IP5306_SetChargeUnderVoltageLoop(v)     ip5306_set_bits(IP5306_REG_CHG_1, 2, 3, v)//Vout=4.45V + (v * 0.05V) (default 4.55V) //When charging at the maximum current, the charge is less than the set value. Slowly reducing the charging current to maintain this voltage
+
+#define IP5306_GetEndChargeCurrentDetection()   ip5306_get_bits(IP5306_REG_CHG_1, 6, 2)
+#define IP5306_SetEndChargeCurrentDetection(v)  ip5306_set_bits(IP5306_REG_CHG_1, 6, 2, v)//0:200mA, 1:400mA, *2:500mA, 3:600mA
+
+#define IP5306_GetVoltagePressure()             ip5306_get_bits(IP5306_REG_CHG_2, 0, 2)
+#define IP5306_SetVoltagePressure(v)            ip5306_set_bits(IP5306_REG_CHG_2, 0, 2, v)//0:none, 1:14mV, *2:28mV, 3:42mV (28mV recommended for 4.2V)
+
+#define IP5306_GetChargeCutoffVoltage()         ip5306_get_bits(IP5306_REG_CHG_2, 2, 2)
+#define IP5306_SetChargeCutoffVoltage(v)        ip5306_set_bits(IP5306_REG_CHG_2, 2, 2, v)//*0:4.2V, 1:4.3V, 2:4.35V, 3:4.4V
+
+#define IP5306_GetChargeCCLoop()                ip5306_get_bits(IP5306_REG_CHG_3, 5, 1)
+#define IP5306_SetChargeCCLoop(v)               ip5306_set_bits(IP5306_REG_CHG_3, 5, 1, v)//0:BAT, *1:VIN
+
+#define IP5306_GetVinCurrent()                  ip5306_get_bits(IP5306_REG_CHG_4, 0, 5)
+#define IP5306_SetVinCurrent(v)                 ip5306_set_bits(IP5306_REG_CHG_4, 0, 5, v)//ImA=(v*100)+50 (default 2250mA)
+
+#define IP5306_GetShortPressDetected()          ip5306_get_bits(IP5306_REG_READ_3, 0, 1)
+#define IP5306_ClearShortPressDetected()        ip5306_set_bits(IP5306_REG_READ_3, 0, 1, 1)
+
+#define IP5306_GetLongPressDetected()           ip5306_get_bits(IP5306_REG_READ_3, 1, 1)
+#define IP5306_ClearLongPressDetected()         ip5306_set_bits(IP5306_REG_READ_3, 1, 1, 1)
+
+#define IP5306_GetDoubleClickDetected()         ip5306_get_bits(IP5306_REG_READ_3, 2, 1)
+#define IP5306_ClearDoubleClickDetected()       ip5306_set_bits(IP5306_REG_READ_3, 2, 1, 1)
+
+#define IP5306_GetPowerSource()                 ip5306_get_bits(IP5306_REG_READ_0, 3, 1)//0:BAT, 1:VIN
+#define IP5306_GetBatteryFull()                 ip5306_get_bits(IP5306_REG_READ_1, 3, 1)//0:CHG/DIS, 1:FULL
+#define IP5306_GetLevelLeds()                ((~ip5306_get_bits(IP5306_REG_READ_4, 4, 4)) & 0x0F)//LED[0-4] State (inverted)
+#define IP5306_GetOutputLoad()                  ip5306_get_bits(IP5306_REG_READ_2, 2, 1)//0:heavy, 1:light
+
+#define IP5306_LEDS2PCT(byte)  \
+  ((byte & 0x01 ? 25 : 0) + \
+  (byte & 0x02 ? 25 : 0) + \
+  (byte & 0x04 ? 25 : 0) + \
+  (byte & 0x08 ? 25 : 0))
+
+int ip5306_get_reg(uint8_t reg);
+int ip5306_set_reg(uint8_t reg, uint8_t value);
+uint8_t ip5306_get_bits(uint8_t reg, uint8_t index, uint8_t bits);
+void ip5306_set_bits(uint8_t reg, uint8_t index, uint8_t bits, uint8_t value);
+
+
+#endif
+

main.cpp

@@ -41,6 +41,7 @@
 #include "CO2_sensor.h"
 #include "VOC_sensor.h"
 #include "button.h"
+#include "esp_ota.h"
 
 /*--------------------------- Program ---------------------------------------*/
 /**
@@ -52,17 +53,33 @@ void setup()
   Serial.println();
   Serial.print("Air Quality Sensor starting up, v");
   Serial.println(VERSION);
+  ProgressbarVisible(true);
+  initLCD();
+  setOTAProgress(10);
 
-  digitalWrite(5, false);
-
-  initWifi();
-  initMQTT();
-  initSensor();
-  initParticles();
-  initCO2sensor();
-  initVOCsensor();
-  //initLCD();
   initButtons();
+  setOTAProgress(20);
+  initWifi();
+  setOTAProgress(30);
+
+  initEspOta();
+  setOTAProgress(40);
+
+  initMQTT();
+  setOTAProgress(50);
+
+  initSensor();
+  setOTAProgress(60);
+
+  initParticles();
+  setOTAProgress(70);
+
+  initCO2sensor();
+  setOTAProgress(80);
+
+  initVOCsensor();
+  setOTAProgress(90);
+  ProgressbarVisible(false);
 }
 
 /**
@@ -75,6 +92,7 @@ void loop()
   handleVOCsensor();
   handleButtons();
   handleSensor();
-  //handleLCD();
+  handleLCD();
   handleMQTT();
+  handleEspOta();
 }

mqtt.cpp

@@ -87,6 +87,7 @@ bool initWifi()
   }
 
   // Connect to wifi
+  WiFi.setHostname(HOST_NAME);
   WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
 
   // Wait for connection set amount of intervals

particles.cpp

@@ -12,7 +12,7 @@ char g_command_topic[50];        // MQTT topic for receiving commands
 #define PMS_STATE_READY 2     // Warmed up, ready to give data
 #define PMSMAX          50
 #define PSMMIN          0
-#define PPDMAX          2000
+#define PPDMAX          3000
 uint8_t g_pms_state = PMS_STATE_WAKING_UP;
 
 uint32_t g_pms_state_start = 0;       // Timestamp when PMS state last changed

platformio.ini

@@ -21,8 +21,12 @@ lib_deps =
 	knolleary/PubSubClient
 	robtillaart/RunningMedian
 	bodmer/Tjpg_decoder
-	adafruit/Adafruit SCD30
+	; adafruit/Adafruit SCD30
-	adafruit/Adafruit BusIO
+	; adafruit/Adafruit BusIO
+	; adafruit/Adafruit SGP30 Sensor
+	http://192.168.2.3:3000/libs/JCButton.git
+	sparkfun/SparkFun SCD30 Arduino Library@^1.0.13
+	sparkfun/SparkFun SGP30 Arduino Library@^1.0.5
 
 [env:esp32]
 platform = espressif32
@@ -32,4 +36,15 @@ monitor_speed = 115200
 lib_deps = 
 	${common.lib_deps_builtin}
 	${common.lib_deps}
-	adafruit/Adafruit SGP30 Sensor@^2.0.0
+
+
+[env:esp32_ota]
+platform = espressif32
+board = esp-wrover-kit
+framework = arduino
+monitor_speed = 115200
+lib_deps = 
+	${common.lib_deps_builtin}
+	${common.lib_deps}
+upload_protocol = espota
+upload_port = 192.168.2.165

sensor.cpp

@@ -39,6 +39,8 @@ void initSensor(void)
 void handleSensor(void)
 {
   publishAll();
+
+  
 }
 
 AQSSensor* getSensor(sensor_e sensor)

sensor.h

@@ -42,6 +42,7 @@ class AQSSensor
     bool _publish = false;
     const uint32_t _scaleMin;
     const uint32_t _scaleMax;
+    bool _valid;
 
 public:
     AQSSensor(String name, sensor_e sensor, String unit,
@@ -58,14 +59,23 @@ public:
         sprintf(_topic, "Sensors/%s/%s", deviceID.c_str(), name.c_str());
         sprintf(_topic_1h, "Sensors/%s/%s/1h/", deviceID.c_str(), name.c_str());
         sprintf(_topic_24h, "Sensors/%s/%s/24h/", deviceID.c_str(), name.c_str());
+        _valid = false;
     }
 
     void publish(void)
     {
-        _publish = true;
+        if (_valid)
+        {
+            _publish = true;
+        }
+        else
+        {
+            Serial.printf("Sensor %s : Not published (invalid)\n", _name.c_str());
+        }
     }
 
-    String getName(void)
+    String
+    getName(void)
     {
         return _name;
     }
@@ -88,9 +98,18 @@ public:
 
     virtual void set(uint32_t value)
     {
-        _value = value;
+        if ((value > _scaleMin) && (value < _scaleMax))
-        _average1h.add(_value);
+        {
-        _average24h.add(_value);
+            _value = value;
+            _average1h.add(_value);
+            _average24h.add(_value);
+            _valid = true;
+        }
+        else
+        {
+            Serial.printf("Sensor %s set(%d): value out of bounds\n", _name.c_str(), _value);
+            _valid = false;
+        }
     }
 
     uint32_t value() { return _value; }
@@ -105,7 +124,7 @@ public:
 
     sensor_e getSensor(void) { return _sensor; }
 
-    String getUnit(void) { return _unit;}
+    String getUnit(void) { return _unit; }
 
     uint32_t getMin(void) { return _scaleMin; }
     uint32_t getMax(void) { return _scaleMax; }