From f023568955a01fcb56e2251c5a9c9a42e0ce8c21 Mon Sep 17 00:00:00 2001 From: Andrey Somov Date: Mon, 20 Jun 2016 22:13:38 +0200 Subject: [PATCH] Use the same term for self-test --- MFRC522.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MFRC522.h b/MFRC522.h index e003451..a0c9f59 100644 --- a/MFRC522.h +++ b/MFRC522.h @@ -83,7 +83,7 @@ // Hint: if needed, you can remove unused self-test data to save flash memory // // Version 0.0 (0x90) -// Philips Semiconductors; Preliminary Specification Revision 2.0 - 01 August 2005; 16.1 Sefttest +// Philips Semiconductors; Preliminary Specification Revision 2.0 - 01 August 2005; 16.1 self-test const byte MFRC522_firmware_referenceV0_0[] PROGMEM = { 0x00, 0x87, 0x98, 0x0f, 0x49, 0xFF, 0x07, 0x19, 0xBF, 0x22, 0x30, 0x49, 0x59, 0x63, 0xAD, 0xCA, @@ -95,7 +95,7 @@ const byte MFRC522_firmware_referenceV0_0[] PROGMEM = { 0x35, 0x96, 0x98, 0x9E, 0x4F, 0x30, 0x32, 0x8D }; // Version 1.0 (0x91) -// NXP Semiconductors; Rev. 3.8 - 17 September 2014; 16.1.1 Self test +// NXP Semiconductors; Rev. 3.8 - 17 September 2014; 16.1.1 self-test const byte MFRC522_firmware_referenceV1_0[] PROGMEM = { 0x00, 0xC6, 0x37, 0xD5, 0x32, 0xB7, 0x57, 0x5C, 0xC2, 0xD8, 0x7C, 0x4D, 0xD9, 0x70, 0xC7, 0x73, @@ -107,7 +107,7 @@ const byte MFRC522_firmware_referenceV1_0[] PROGMEM = { 0xD9, 0x0F, 0xB5, 0x5E, 0x25, 0x1D, 0x29, 0x79 }; // Version 2.0 (0x92) -// NXP Semiconductors; Rev. 3.8 - 17 September 2014; 16.1.1 Self test +// NXP Semiconductors; Rev. 3.8 - 17 September 2014; 16.1.1 self-test const byte MFRC522_firmware_referenceV2_0[] PROGMEM = { 0x00, 0xEB, 0x66, 0xBA, 0x57, 0xBF, 0x23, 0x95, 0xD0, 0xE3, 0x0D, 0x3D, 0x27, 0x89, 0x5C, 0xDE, @@ -197,7 +197,7 @@ public: TestPinEnReg = 0x33 << 1, // enables pin output driver on pins D1 to D7 TestPinValueReg = 0x34 << 1, // defines the values for D1 to D7 when it is used as an I/O bus TestBusReg = 0x35 << 1, // shows the status of the internal test bus - AutoTestReg = 0x36 << 1, // controls the digital self test + AutoTestReg = 0x36 << 1, // controls the digital self-test VersionReg = 0x37 << 1, // shows the software version AnalogTestReg = 0x38 << 1, // controls the pins AUX1 and AUX2 TestDAC1Reg = 0x39 << 1, // defines the test value for TestDAC1 @@ -214,7 +214,7 @@ public: PCD_Idle = 0x00, // no action, cancels current command execution PCD_Mem = 0x01, // stores 25 bytes into the internal buffer PCD_GenerateRandomID = 0x02, // generates a 10-byte random ID number - PCD_CalcCRC = 0x03, // activates the CRC coprocessor or performs a self test + PCD_CalcCRC = 0x03, // activates the CRC coprocessor or performs a self-test PCD_Transmit = 0x04, // transmits data from the FIFO buffer PCD_NoCmdChange = 0x07, // no command change, can be used to modify the CommandReg register bits without affecting the command, for example, the PowerDown bit PCD_Receive = 0x08, // activates the receiver circuits