Added Ntag216_AUTH.ino to .travis.yml

.travis.yml

@@ -18,6 +18,7 @@ env:
     - PLATFORMIO_CI_SRC=examples/ReadUidMultiReader/ReadUidMultiReader.ino
     - PLATFORMIO_CI_SRC=examples/rfid_default_keys/rfid_default_keys.ino
     - PLATFORMIO_CI_SRC=examples/rfid_write_personal_data/rfid_write_personal_data.ino
+    - PLATFORMIO_CI_SRC=examples/Ntag216_AUTH/Ntag216_AUTH.ino
 
 install:
     - pip install -U platformio

examples/Ntag216_AUTH

@@ -1,59 +0,0 @@
-//This example show how you can get Authenticated by the NTAG213,215,216 by default the tags are unprotected in order to protect them we need to write 4 different values:
-// Using mfrc522.MIFARE_Ultralight_Write(PageNum, Data, #Databytes)) 
-//1.- we need to write the 32bit passWord to page 0xE5 !for ntag 213 and 215 page is different refer to nxp documentation!
-//2.- Now Write the 16 bits pACK to the page 0xE6 use the 2 high bytes like this: pACKH + pACKL + 00 + 00 after an authentication the tag will return this secret bytes
-//3.- Now we need to write the first page we want to protect this is a 1 byte data in page 0xE3 we need to write 00 + 00 + 00 + firstPage  all pages after this one are write protected
-// Now WRITE protection is ACTIVATED so we need to get authenticated in order to write the last data
-//4.- Finally we need to write an access record in order to READ protect the card this step is optional only if you want to read protect also write 80 + 00 + 00 + 00 to 0xE4
-//After completeing all these steps you will nee to authentiate first in order to read or write ant page after the first page you selected to protect 
-//To disengage proection just write the page (0xE3) to 00 + 00 + 00 + FF that going to remove all protection
-//Made by GARGANTUA from RoboCreators.com & paradoxalabs.com
-
-#include <SPI.h>
-#include <MFRC522.h>
-
-#define RST_PIN    9   // 
-#define SS_PIN    10    //
-
-MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance
-
-void setup() {
-  Serial.begin(9600);   // Initialize serial communications with the PC
-  while (!Serial);    // Do nothing if no serial port is opened (added for Arduinos based on ATMEGA32U4)
-  SPI.begin();      // Init SPI bus
-  mfrc522.PCD_Init();   // Init MFRC522
-  Serial.println(F("Scan PICC to see UID, type, and data blocks..."));
-}
-
-void loop() {
-  // Look for new cards
-  if ( ! mfrc522.PICC_IsNewCardPresent()) {
-    return;
-  }
-
-  // Select one of the cards
-  if ( ! mfrc522.PICC_ReadCardSerial()) {
-    return;
-  }
-
-
-byte PSWBuff[]={0xFF,0xFF,0xFF,0xFF}; //32 bit PassWord default FFFFFFFF
-byte pACK[]={0,0}; //16 bit PassWord ACK returned by the NFCtag
-
-Serial.print("Auth: ");
-Serial.println(mfrc522.PCD_NTAG216_AUTH(&PSWBuff[0],pACK)); //Request Authentification if return STATUS_OK we are good
-
-//Print PassWordACK
-Serial.print(pACK[0],HEX);
-Serial.println(pACK[1],HEX);
-
-byte WBuff[] = {0x00,0x00,0x00,0x04};
-byte RBuff[18];
-
-//Serial.print("CHG BLK: ");
-//Serial.println(mfrc522.MIFARE_Ultralight_Write(0xE3, WBuff, 4));  //How to write to a page 
-    
-mfrc522.PICC_DumpMifareUltralightToSerial(); //This is a modifier dunp just cghange the for cicle to < 232 instead of < 16 in order to see all the pages on NTAG216
-
-delay(3000);
-}