libs/RFID.MFRC522
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fixed various typos and whitespace layout issues (no code should have changed by this commit)

Browse Source
This commit is contained in:
mdxs
2014-11-10 09:15:23 +01:00
parent 0ee8e53b4a
commit a9360d6022
2 changed files with 44 additions and 44 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
MFRC522.cpp
View File

@@ -1,6 +1,6 @@
/*
* MFRC522.cpp - Library to use ARDUINO RFID MODULE KIT 13.56 MHZ WITH TAGS SPI W AND R BY COOQROBOT.
* _Please_ see the comments in MFRC522.h - they give useful hints and background.
* NOTE: Please also check the comments in MFRC522.h - they provide useful hints and background information.
* Released into the public domain.
*/
@@ -233,7 +233,7 @@ void MFRC522::PCD_Reset() {
/**
* Turns the antenna on by enabling pins TX1 and TX2.
* After a reset these pins disabled.
* After a reset these pins are disabled.
*/
void MFRC522::PCD_AntennaOn() {
byte value = PCD_ReadRegister(TxControlReg);
@@ -265,7 +265,7 @@ byte MFRC522::PCD_TransceiveData( byte *sendData, ///< Pointer to the data to t
} // End PCD_TransceiveData()
/**
* Transfers data to the MFRC522 FIFO, executes a commend, waits for completion and transfers data back from the FIFO.
* Transfers data to the MFRC522 FIFO, executes a command, waits for completion and transfers data back from the FIFO.
* CRC validation can only be done if backData and backLen are specified.
*
* @return STATUS_OK on success, STATUS_??? otherwise.
@@ -541,7 +541,7 @@ byte MFRC522::PICC_Select( Uid *uid, ///< Pointer to Uid struct. Normally outp
if (currentLevelKnownBits >= 32) { // All UID bits in this Cascade Level are known. This is a SELECT.
//Serial.print("SELECT: currentLevelKnownBits="); Serial.println(currentLevelKnownBits, DEC);
buffer[1] = 0x70; // NVB - Number of Valid Bits: Seven whole bytes
// Calulate BCC - Block Check Character
// Calculate BCC - Block Check Character
buffer[6] = buffer[2] ^ buffer[3] ^ buffer[4] ^ buffer[5];
// Calculate CRC_A
result = PCD_CalculateCRC(buffer, 7, &buffer[7]);

8
MFRC522.h
View File

@@ -100,7 +100,7 @@ public:
CollReg = 0x0E << 1, // bit position of the first bit-collision detected on the RF interface
// 0x0F // reserved for future use
// Page 1:Command
// Page 1: Command
// 0x10 // reserved for future use
ModeReg = 0x11 << 1, // defines general modes for transmitting and receiving
TxModeReg = 0x12 << 1, // defines transmission data rate and framing
@@ -136,7 +136,7 @@ public:
TCounterValueRegH = 0x2E << 1, // shows the 16-bit timer value
TCounterValueRegL = 0x2F << 1,
// Page 3:Test Registers
// Page 3: Test Registers
// 0x30 // reserved for future use
TestSel1Reg = 0x31 << 1, // general test signal configuration
TestSel2Reg = 0x32 << 1, // general test signal configuration
@@ -155,7 +155,7 @@ public:
// 0x3F // reserved for production tests
};
// MFRC522 comands. Described in chapter 10 of the datasheet.
// MFRC522 commands. Described in chapter 10 of the datasheet.
enum PCD_Command {
PCD_Idle = 0x00, // no action, cancels current command execution
PCD_Mem = 0x01, // stores 25 bytes into the internal buffer
@@ -279,7 +279,7 @@ public:
byte PICC_RequestA(byte *bufferATQA, byte *bufferSize);
byte PICC_WakeupA(byte *bufferATQA, byte *bufferSize);
byte PICC_REQA_or_WUPA( byte command, byte *bufferATQA, byte *bufferSize);
byte PICC_REQA_or_WUPA(byte command, byte *bufferATQA, byte *bufferSize);
byte PICC_Select(Uid *uid, byte validBits = 0);
byte PICC_HaltA();