libs/RFID.MFRC522
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

style space to tab

Browse Source 
no code change, just style
This commit is contained in:
Rotzbua
2015-03-15 20:07:39 +01:00
parent 56d2777eb3
commit 2dc9124ffc
2 changed files with 294 additions and 297 deletions
Download Patch File Download Diff File Expand all files Collapse all files

564
MFRC522.cpp
View File

@@ -279,71 +279,69 @@ void MFRC522::PCD_SetAntennaGain(byte mask) {
* @return Whether or not the test passed.
*/
bool MFRC522::PCD_PerformSelfTest() {
// This follows directly the steps outlined in 16.1.1
// 1. Perform a soft reset.
PCD_Reset();
// 2. Clear the internal buffer by writing 25 bytes of 00h
byte ZEROES[25] = {0x00};
PCD_SetRegisterBitMask(FIFOLevelReg, 0x80); // flush the FIFO buffer
PCD_WriteRegister(FIFODataReg, 25, ZEROES); // write 25 bytes of 00h to FIFO
PCD_WriteRegister(CommandReg, PCD_Mem); // transfer to internal buffer
// 3. Enable self-test
PCD_WriteRegister(AutoTestReg, 0x09);
// 4. Write 00h to FIFO buffer
PCD_WriteRegister(FIFODataReg, 0x00);
// 5. Start self-test by issuing the CalcCRC command
PCD_WriteRegister(CommandReg, PCD_CalcCRC);
// 6. Wait for self-test to complete
word i;
byte n;
for (i = 0; i < 0xFF; i++) {
n = PCD_ReadRegister(DivIrqReg); // DivIrqReg[7..0] bits are: Set2 reserved reserved MfinActIRq reserved CRCIRq reserved reserved
if (n & 0x04) { // CRCIRq bit set - calculation done
break;
}
}
PCD_WriteRegister(CommandReg, PCD_Idle); // Stop calculating CRC for new content in the FIFO.
// 7. Read out resulting 64 bytes from the FIFO buffer.
byte result[64];
PCD_ReadRegister(FIFODataReg, 64, result, 0);
// Auto self-test done
// Reset AutoTestReg register to be 0 again. Required for normal operation.
PCD_WriteRegister(AutoTestReg, 0x00);
// Determine firmware version (see section 9.3.4.8 in spec)
byte version = PCD_ReadRegister(VersionReg);
// Pick the appropriate reference values
const byte *reference;
switch (version) {
case 0x91: // Version 1.0
reference = MFRC522_firmware_referenceV1_0;
break;
case 0x92: // Version 2.0
reference = MFRC522_firmware_referenceV2_0;
break;
default: // Unknown version
return false;
}
// Verify that the results match up to our expectations
for (i = 0; i < 64; i++) {
if (result[i] != pgm_read_byte(&(reference[i]))) {
return false;
}
}
// Test passed; all is good.
return true;
// This follows directly the steps outlined in 16.1.1
// 1. Perform a soft reset.
PCD_Reset();
// 2. Clear the internal buffer by writing 25 bytes of 00h
byte ZEROES[25] = {0x00};
PCD_SetRegisterBitMask(FIFOLevelReg, 0x80); // flush the FIFO buffer
PCD_WriteRegister(FIFODataReg, 25, ZEROES); // write 25 bytes of 00h to FIFO
PCD_WriteRegister(CommandReg, PCD_Mem); // transfer to internal buffer
// 3. Enable self-test
PCD_WriteRegister(AutoTestReg, 0x09);
// 4. Write 00h to FIFO buffer
PCD_WriteRegister(FIFODataReg, 0x00);
// 5. Start self-test by issuing the CalcCRC command
PCD_WriteRegister(CommandReg, PCD_CalcCRC);
// 6. Wait for self-test to complete
word i;
byte n;
for (i = 0; i < 0xFF; i++) {
n = PCD_ReadRegister(DivIrqReg); // DivIrqReg[7..0] bits are: Set2 reserved reserved MfinActIRq reserved CRCIRq reserved reserved
if (n & 0x04) { // CRCIRq bit set - calculation done
break;
}
}
PCD_WriteRegister(CommandReg, PCD_Idle); // Stop calculating CRC for new content in the FIFO.
// 7. Read out resulting 64 bytes from the FIFO buffer.
byte result[64];
PCD_ReadRegister(FIFODataReg, 64, result, 0);
// Auto self-test done
// Reset AutoTestReg register to be 0 again. Required for normal operation.
PCD_WriteRegister(AutoTestReg, 0x00);
// Determine firmware version (see section 9.3.4.8 in spec)
byte version = PCD_ReadRegister(VersionReg);
// Pick the appropriate reference values
const byte *reference;
switch (version) {
case 0x91: // Version 1.0
reference = MFRC522_firmware_referenceV1_0;
break;
case 0x92: // Version 2.0
reference = MFRC522_firmware_referenceV2_0;
break;
default: // Unknown version
return false;
}
// Verify that the results match up to our expectations
for (i = 0; i < 64; i++) {
if (result[i] != pgm_read_byte(&(reference[i]))) {
return false;
}
}
// Test passed; all is good.
return true;
} // End PCD_PerformSelfTest()
/////////////////////////////////////////////////////////////////////////////////////
@@ -386,7 +384,7 @@ byte MFRC522::PCD_CommunicateWithPICC( byte command, ///< The command to execut
) {
byte n, _validBits;
unsigned int i;
// Prepare values for BitFramingReg
byte txLastBits = validBits ? *validBits : 0;
byte bitFraming = (rxAlign << 4) + txLastBits; // RxAlign = BitFramingReg[6..4]. TxLastBits = BitFramingReg[2..0]
@@ -754,7 +752,7 @@ byte MFRC522::PICC_Select( Uid *uid, ///< Pointer to Uid struct. Normally outp
byte MFRC522::PICC_HaltA() {
byte result;
byte buffer[4];
// Build command buffer
buffer[0] = PICC_CMD_HLTA;
buffer[1] = 0;
@@ -763,7 +761,7 @@ byte MFRC522::PICC_HaltA() {
if (result != STATUS_OK) {
return result;
}
// Send the command.
// The standard says:
// If the PICC responds with any modulation during a period of 1 ms after the end of the frame containing the
@@ -853,7 +851,7 @@ byte MFRC522::MIFARE_Read( byte blockAddr, ///< MIFARE Classic: The block (0-0x
if (buffer == NULL || *bufferSize < 18) {
return STATUS_NO_ROOM;
}
// Build command buffer
buffer[0] = PICC_CMD_MF_READ;
buffer[1] = blockAddr;
@@ -883,12 +881,12 @@ byte MFRC522::MIFARE_Write( byte blockAddr, ///< MIFARE Classic: The block (0-0x
byte bufferSize ///< Buffer size, must be at least 16 bytes. Exactly 16 bytes are written.
) {
byte result;
// Sanity check
if (buffer == NULL || bufferSize < 16) {
return STATUS_INVALID;
}
// Mifare Classic protocol requires two communications to perform a write.
// Step 1: Tell the PICC we want to write to block blockAddr.
byte cmdBuffer[2];
@@ -898,13 +896,13 @@ byte MFRC522::MIFARE_Write( byte blockAddr, ///< MIFARE Classic: The block (0-0x
if (result != STATUS_OK) {
return result;
}
// Step 2: Transfer the data
result = PCD_MIFARE_Transceive( buffer, bufferSize); // Adds CRC_A and checks that the response is MF_ACK.
if (result != STATUS_OK) {
return result;
}
return STATUS_OK;
} // End MIFARE_Write()
@@ -918,12 +916,12 @@ byte MFRC522::MIFARE_Ultralight_Write( byte page, ///< The page (2-15) to writ
byte bufferSize ///< Buffer size, must be at least 4 bytes. Exactly 4 bytes are written.
) {
byte result;
// Sanity check
if (buffer == NULL || bufferSize < 4) {
return STATUS_INVALID;
}
// Build commmand buffer
byte cmdBuffer[6];
cmdBuffer[0] = PICC_CMD_UL_WRITE;
@@ -992,7 +990,7 @@ byte MFRC522::MIFARE_TwoStepHelper( byte command, ///< The command to use
) {
byte result;
byte cmdBuffer[2]; // We only need room for 2 bytes.
// Step 1: Tell the PICC the command and block address
cmdBuffer[0] = command;
cmdBuffer[1] = blockAddr;
@@ -1000,13 +998,13 @@ byte MFRC522::MIFARE_TwoStepHelper( byte command, ///< The command to use
if (result != STATUS_OK) {
return result;
}
// Step 2: Transfer the data
result = PCD_MIFARE_Transceive( (byte *)&data, 4, true); // Adds CRC_A and accept timeout as success.
if (result != STATUS_OK) {
return result;
}
return STATUS_OK;
} // End MIFARE_TwoStepHelper()
@@ -1021,7 +1019,7 @@ byte MFRC522::MIFARE_Transfer( byte blockAddr ///< The block (0-0xff) number.
) {
byte result;
byte cmdBuffer[2]; // We only need room for 2 bytes.
// Tell the PICC we want to transfer the result into block blockAddr.
cmdBuffer[0] = PICC_CMD_MF_TRANSFER;
cmdBuffer[1] = blockAddr;
@@ -1044,17 +1042,17 @@ byte MFRC522::MIFARE_Transfer( byte blockAddr ///< The block (0-0xff) number.
* @return STATUS_OK on success, STATUS_??? otherwise.
*/
byte MFRC522::MIFARE_GetValue(byte blockAddr, long *value) {
byte status;
byte buffer[18];
byte size = sizeof(buffer);
// Read the block
status = MIFARE_Read(blockAddr, buffer, &size);
if (status == STATUS_OK) {
// Extract the value
*value = (long(buffer[3])<<24) | (long(buffer[2])<<16) | (long(buffer[1])<<8) | long(buffer[0]);
}
return status;
byte status;
byte buffer[18];
byte size = sizeof(buffer);
// Read the block
status = MIFARE_Read(blockAddr, buffer, &size);
if (status == STATUS_OK) {
// Extract the value
*value = (long(buffer[3])<<24) | (long(buffer[2])<<16) | (long(buffer[1])<<8) | long(buffer[0]);
}
return status;
} // End MIFARE_GetValue()
/**
@@ -1069,24 +1067,24 @@ byte MFRC522::MIFARE_GetValue(byte blockAddr, long *value) {
* @return STATUS_OK on success, STATUS_??? otherwise.
*/
byte MFRC522::MIFARE_SetValue(byte blockAddr, long value) {
byte buffer[18];
// Translate the long into 4 bytes; repeated 2x in value block
buffer[0] = buffer[ 8] = (value & 0xFF);
buffer[1] = buffer[ 9] = (value & 0xFF00) >> 8;
buffer[2] = buffer[10] = (value & 0xFF0000) >> 16;
buffer[3] = buffer[11] = (value & 0xFF000000) >> 24;
// Inverse 4 bytes also found in value block
buffer[4] = ~buffer[0];
buffer[5] = ~buffer[1];
buffer[6] = ~buffer[2];
buffer[7] = ~buffer[3];
// Address 2x with inverse address 2x
buffer[12] = buffer[14] = blockAddr;
buffer[13] = buffer[15] = ~blockAddr;
// Write the whole data block
return MIFARE_Write(blockAddr, buffer, 16);
byte buffer[18];
// Translate the long into 4 bytes; repeated 2x in value block
buffer[0] = buffer[ 8] = (value & 0xFF);
buffer[1] = buffer[ 9] = (value & 0xFF00) >> 8;
buffer[2] = buffer[10] = (value & 0xFF0000) >> 16;
buffer[3] = buffer[11] = (value & 0xFF000000) >> 24;
// Inverse 4 bytes also found in value block
buffer[4] = ~buffer[0];
buffer[5] = ~buffer[1];
buffer[6] = ~buffer[2];
buffer[7] = ~buffer[3];
// Address 2x with inverse address 2x
buffer[12] = buffer[14] = blockAddr;
buffer[13] = buffer[15] = ~blockAddr;
// Write the whole data block
return MIFARE_Write(blockAddr, buffer, 16);
} // End MIFARE_SetValue()
/////////////////////////////////////////////////////////////////////////////////////
@@ -1105,7 +1103,7 @@ byte MFRC522::PCD_MIFARE_Transceive( byte *sendData, ///< Pointer to the data t
) {
byte result;
byte cmdBuffer[18]; // We need room for 16 bytes data and 2 bytes CRC_A.
// Sanity check
if (sendData == NULL || sendLen > 16) {
return STATUS_INVALID;
@@ -1230,7 +1228,7 @@ void MFRC522::PICC_DumpToSerial(Uid *uid ///< Pointer to Uid struct returned fro
Serial.print(uid->uidByte[i], HEX);
}
Serial.println();
// PICC type
byte piccType = PICC_GetType(uid->sak);
Serial.print(F("PICC type: "));
@@ -1264,7 +1262,7 @@ void MFRC522::PICC_DumpToSerial(Uid *uid ///< Pointer to Uid struct returned fro
default:
break; // No memory dump here
}
Serial.println();
PICC_HaltA(); // Already done if it was a MIFARE Classic PICC.
} // End PICC_DumpToSerial()
@@ -1322,7 +1320,7 @@ void MFRC522::PICC_DumpMifareClassicSectorToSerial(Uid *uid, ///< Pointer to U
byte firstBlock; // Address of lowest address to dump actually last block dumped)
byte no_of_blocks; // Number of blocks in sector
bool isSectorTrailer; // Set to true while handling the "last" (ie highest address) in the sector.
// The access bits are stored in a peculiar fashion.
// There are four groups:
// g[3] Access bits for the sector trailer, block 3 (for sectors 0-31) or block 15 (for sectors 32-39)
@@ -1337,7 +1335,7 @@ void MFRC522::PICC_DumpMifareClassicSectorToSerial(Uid *uid, ///< Pointer to U
byte g[4]; // Access bits for each of the four groups.
byte group; // 0-3 - active group for access bits
bool firstInGroup; // True for the first block dumped in the group
// Determine position and size of sector.
if (sector < 32) { // Sectors 0..31 has 4 blocks each
no_of_blocks = 4;
@@ -1411,7 +1409,7 @@ void MFRC522::PICC_DumpMifareClassicSectorToSerial(Uid *uid, ///< Pointer to U
g[3] = ((c1 & 8) >> 1) | ((c2 & 8) >> 2) | ((c3 & 8) >> 3);
isSectorTrailer = false;
}
// Which access group is this block in?
if (no_of_blocks == 4) {
group = blockOffset;
@@ -1453,7 +1451,7 @@ void MFRC522::PICC_DumpMifareUltralightToSerial() {
byte byteCount;
byte buffer[18];
byte i;
Serial.println(F("Page 0 1 2 3"));
// Try the mpages of the original Ultralight. Ultralight C has more pages.
for (byte page = 0; page < 16; page +=4) { // Read returns data for 4 pages at a time.
@@ -1512,65 +1510,65 @@ void MFRC522::MIFARE_SetAccessBits( byte *accessBitBuffer, ///< Pointer to byte
* Of course with non-bricked devices, you're free to select them before calling this function.
*/
bool MFRC522::MIFARE_OpenUidBackdoor(bool logErrors) {
// Magic sequence:
// > 50 00 57 CD (HALT + CRC)
// > 40 (7 bits only)
// < A (4 bits only)
// > 43
// < A (4 bits only)
// Then you can write to sector 0 without authenticating
PICC_HaltA(); // 50 00 57 CD
byte cmd = 0x40;
byte validBits = 7; /* Our command is only 7 bits. After receiving card response,
this will contain amount of valid response bits. */
byte response[32]; // Card's response is written here
byte received;
byte status = PCD_TransceiveData(&cmd, (byte)1, response, &received, &validBits, (byte)0, false); // 40
if( status != STATUS_OK ) {
if( logErrors ) {
Serial.println(F("Card did not respond to 0x40 after HALT command. Are you sure it is a UID changeable one?"));
Serial.print(F("Error name: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
if ( received != 1 || response[0] != 0x0A ) {
if ( logErrors ) {
Serial.print(F("Got bad response on backdoor 0x40 command: "));
Serial.print(response[0], HEX);
Serial.print(F(" ("));
Serial.print(validBits);
Serial.print(F(" valid bits)\r\n"));
}
return false;
}
cmd = 0x43;
validBits = 8;
status = PCD_TransceiveData(&cmd, (byte)1, response, &received, &validBits, (byte)0, false); // 43
if( status != STATUS_OK ) {
if( logErrors ) {
Serial.println(F("Error in communication at command 0x43, after successfully executing 0x40"));
Serial.print(F("Error name: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
if ( received != 1 || response[0] != 0x0A ) {
if ( logErrors ) {
Serial.print(F("Got bad response on backdoor 0x43 command: "));
Serial.print(response[0], HEX);
Serial.print(F(" ("));
Serial.print(validBits);
Serial.print(F(" valid bits)\r\n"));
}
return false;
}
// You can now write to sector 0 without authenticating!
return true;
// Magic sequence:
// > 50 00 57 CD (HALT + CRC)
// > 40 (7 bits only)
// < A (4 bits only)
// > 43
// < A (4 bits only)
// Then you can write to sector 0 without authenticating
PICC_HaltA(); // 50 00 57 CD
byte cmd = 0x40;
byte validBits = 7; /* Our command is only 7 bits. After receiving card response,
this will contain amount of valid response bits. */
byte response[32]; // Card's response is written here
byte received;
byte status = PCD_TransceiveData(&cmd, (byte)1, response, &received, &validBits, (byte)0, false); // 40
if( status != STATUS_OK ) {
if( logErrors ) {
Serial.println(F("Card did not respond to 0x40 after HALT command. Are you sure it is a UID changeable one?"));
Serial.print(F("Error name: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
if ( received != 1 || response[0] != 0x0A ) {
if ( logErrors ) {
Serial.print(F("Got bad response on backdoor 0x40 command: "));
Serial.print(response[0], HEX);
Serial.print(F(" ("));
Serial.print(validBits);
Serial.print(F(" valid bits)\r\n"));
}
return false;
}
cmd = 0x43;
validBits = 8;
status = PCD_TransceiveData(&cmd, (byte)1, response, &received, &validBits, (byte)0, false); // 43
if( status != STATUS_OK ) {
if( logErrors ) {
Serial.println(F("Error in communication at command 0x43, after successfully executing 0x40"));
Serial.print(F("Error name: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
if ( received != 1 || response[0] != 0x0A ) {
if ( logErrors ) {
Serial.print(F("Got bad response on backdoor 0x43 command: "));
Serial.print(response[0], HEX);
Serial.print(F(" ("));
Serial.print(validBits);
Serial.print(F(" valid bits)\r\n"));
}
return false;
}
// You can now write to sector 0 without authenticating!
return true;
} // End MIFARE_OpenUidBackdoor()
/**
@@ -1582,121 +1580,121 @@ bool MFRC522::MIFARE_OpenUidBackdoor(bool logErrors) {
* Make sure to have selected the card before this function is called.
*/
bool MFRC522::MIFARE_SetUid(byte* newUid, byte uidSize, bool logErrors) {
// UID + BCC byte can not be larger than 16 together
if ( !newUid || !uidSize || uidSize > 15) {
if ( logErrors ) {
Serial.println(F("New UID buffer empty, size 0, or size > 15 given"));
}
return false;
}
// Authenticate for reading
MIFARE_Key key = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
byte status = PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, (byte)1, &key, &uid);
if ( status != STATUS_OK ) {
if ( status == STATUS_TIMEOUT ) {
// We get a read timeout if no card is selected yet, so let's select one
// Wake the card up again if sleeping
// byte atqa_answer[2];
// byte atqa_size = 2;
// PICC_WakeupA(atqa_answer, &atqa_size);
if ( !PICC_IsNewCardPresent() || !PICC_ReadCardSerial() ) {
Serial.println(F("No card was previously selected, and none are available. Failed to set UID."));
return false;
}
status = PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, (byte)1, &key, &uid);
if ( status != STATUS_OK ) {
// We tried, time to give up
if ( logErrors ) {
Serial.println(F("Failed to authenticate to card for reading, could not set UID: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
}
else {
if ( logErrors ) {
Serial.print(F("PCD_Authenticate() failed: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
}
// Read block 0
byte block0_buffer[18];
byte byteCount = sizeof(block0_buffer);
status = MIFARE_Read((byte)0, block0_buffer, &byteCount);
if ( status != STATUS_OK ) {
if ( logErrors ) {
Serial.print(F("MIFARE_Read() failed: "));
Serial.println(GetStatusCodeName(status));
Serial.println(F("Are you sure your KEY A for sector 0 is 0xFFFFFFFFFFFF?"));
}
return false;
}
// Write new UID to the data we just read, and calculate BCC byte
byte bcc = 0;
for ( int i = 0; i < uidSize; i++ ) {
block0_buffer[i] = newUid[i];
bcc ^= newUid[i];
}
// Write BCC byte to buffer
block0_buffer[uidSize] = bcc;
// Stop encrypted traffic so we can send raw bytes
PCD_StopCrypto1();
// Activate UID backdoor
if ( !MIFARE_OpenUidBackdoor(logErrors) ) {
if ( logErrors ) {
Serial.println(F("Activating the UID backdoor failed."));
}
return false;
}
// Write modified block 0 back to card
status = MIFARE_Write((byte)0, block0_buffer, (byte)16);
if (status != STATUS_OK) {
if ( logErrors ) {
Serial.print(F("MIFARE_Write() failed: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
// Wake the card up again
byte atqa_answer[2];
byte atqa_size = 2;
PICC_WakeupA(atqa_answer, &atqa_size);
return true;
// UID + BCC byte can not be larger than 16 together
if ( !newUid || !uidSize || uidSize > 15) {
if ( logErrors ) {
Serial.println(F("New UID buffer empty, size 0, or size > 15 given"));
}
return false;
}
// Authenticate for reading
MIFARE_Key key = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
byte status = PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, (byte)1, &key, &uid);
if ( status != STATUS_OK ) {
if ( status == STATUS_TIMEOUT ) {
// We get a read timeout if no card is selected yet, so let's select one
// Wake the card up again if sleeping
// byte atqa_answer[2];
// byte atqa_size = 2;
// PICC_WakeupA(atqa_answer, &atqa_size);
if ( !PICC_IsNewCardPresent() || !PICC_ReadCardSerial() ) {
Serial.println(F("No card was previously selected, and none are available. Failed to set UID."));
return false;
}
status = PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, (byte)1, &key, &uid);
if ( status != STATUS_OK ) {
// We tried, time to give up
if ( logErrors ) {
Serial.println(F("Failed to authenticate to card for reading, could not set UID: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
}
else {
if ( logErrors ) {
Serial.print(F("PCD_Authenticate() failed: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
}
// Read block 0
byte block0_buffer[18];
byte byteCount = sizeof(block0_buffer);
status = MIFARE_Read((byte)0, block0_buffer, &byteCount);
if ( status != STATUS_OK ) {
if ( logErrors ) {
Serial.print(F("MIFARE_Read() failed: "));
Serial.println(GetStatusCodeName(status));
Serial.println(F("Are you sure your KEY A for sector 0 is 0xFFFFFFFFFFFF?"));
}
return false;
}
// Write new UID to the data we just read, and calculate BCC byte
byte bcc = 0;
for ( int i = 0; i < uidSize; i++ ) {
block0_buffer[i] = newUid[i];
bcc ^= newUid[i];
}
// Write BCC byte to buffer
block0_buffer[uidSize] = bcc;
// Stop encrypted traffic so we can send raw bytes
PCD_StopCrypto1();
// Activate UID backdoor
if ( !MIFARE_OpenUidBackdoor(logErrors) ) {
if ( logErrors ) {
Serial.println(F("Activating the UID backdoor failed."));
}
return false;
}
// Write modified block 0 back to card
status = MIFARE_Write((byte)0, block0_buffer, (byte)16);
if (status != STATUS_OK) {
if ( logErrors ) {
Serial.print(F("MIFARE_Write() failed: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
// Wake the card up again
byte atqa_answer[2];
byte atqa_size = 2;
PICC_WakeupA(atqa_answer, &atqa_size);
return true;
}
/**
* Resets entire sector 0 to zeroes, so the card can be read again by readers.
*/
bool MFRC522::MIFARE_UnbrickUidSector(bool logErrors) {
MIFARE_OpenUidBackdoor( logErrors );
byte block0_buffer[] = {0x01, 0x02, 0x03, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
// Write modified block 0 back to card
byte status = MIFARE_Write((byte)0, block0_buffer, (byte)16);
if (status != STATUS_OK) {
if ( logErrors ) {
Serial.print(F("MIFARE_Write() failed: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
MIFARE_OpenUidBackdoor( logErrors );
byte block0_buffer[] = {0x01, 0x02, 0x03, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
// Write modified block 0 back to card
byte status = MIFARE_Write((byte)0, block0_buffer, (byte)16);
if (status != STATUS_OK) {
if ( logErrors ) {
Serial.print(F("MIFARE_Write() failed: "));
Serial.println(GetStatusCodeName(status));
}
return false;
}
}
/////////////////////////////////////////////////////////////////////////////////////

27
MFRC522.h
View File

@@ -242,7 +242,7 @@ public:
MF_ACK = 0xA, // The MIFARE Classic uses a 4 bit ACK/NAK. Any other value than 0xA is NAK.
MF_KEY_SIZE = 6 // A Mifare Crypto1 key is 6 bytes.
};
// PICC types we can detect. Remember to update PICC_GetTypeName() if you add more.
enum PICC_Type {
PICC_TYPE_UNKNOWN = 0,
@@ -305,7 +305,7 @@ public:
void PCD_SetRegisterBitMask(byte reg, byte mask);
void PCD_ClearRegisterBitMask(byte reg, byte mask);
byte PCD_CalculateCRC(byte *data, byte length, byte *result);
/////////////////////////////////////////////////////////////////////////////////////
// Functions for manipulating the MFRC522
/////////////////////////////////////////////////////////////////////////////////////
@@ -315,14 +315,13 @@ public:
void PCD_AntennaOff();
byte PCD_GetAntennaGain();
void PCD_SetAntennaGain(byte mask);
bool PCD_PerformSelfTest();
bool PCD_PerformSelfTest();
/////////////////////////////////////////////////////////////////////////////////////
// Functions for communicating with PICCs
/////////////////////////////////////////////////////////////////////////////////////
byte PCD_TransceiveData(byte *sendData, byte sendLen, byte *backData, byte *backLen, byte *validBits = NULL, byte rxAlign = 0, bool checkCRC = false);
byte PCD_CommunicateWithPICC(byte command, byte waitIRq, byte *sendData, byte sendLen, byte *backData = NULL, byte *backLen = NULL, byte *validBits = NULL, byte rxAlign = 0, bool checkCRC = false);
byte PICC_RequestA(byte *bufferATQA, byte *bufferSize);
byte PICC_WakeupA(byte *bufferATQA, byte *bufferSize);
byte PICC_REQA_or_WUPA(byte command, byte *bufferATQA, byte *bufferSize);
@@ -336,14 +335,14 @@ public:
void PCD_StopCrypto1();
byte MIFARE_Read(byte blockAddr, byte *buffer, byte *bufferSize);
byte MIFARE_Write(byte blockAddr, byte *buffer, byte bufferSize);
byte MIFARE_Decrement(byte blockAddr, long delta);
byte MIFARE_Decrement(byte blockAddr, long delta);
byte MIFARE_Increment(byte blockAddr, long delta);
byte MIFARE_Restore(byte blockAddr);
byte MIFARE_Transfer(byte blockAddr);
byte MIFARE_Restore(byte blockAddr);
byte MIFARE_Transfer(byte blockAddr);
byte MIFARE_Ultralight_Write(byte page, byte *buffer, byte bufferSize);
byte MIFARE_GetValue(byte blockAddr, long *value);
byte MIFARE_SetValue(byte blockAddr, long value);
byte MIFARE_GetValue(byte blockAddr, long *value);
byte MIFARE_SetValue(byte blockAddr, long value);
/////////////////////////////////////////////////////////////////////////////////////
// Support functions
/////////////////////////////////////////////////////////////////////////////////////
@@ -360,16 +359,16 @@ public:
void PICC_DumpMifareClassicSectorToSerial(Uid *uid, MIFARE_Key *key, byte sector);
void PICC_DumpMifareUltralightToSerial();
void MIFARE_SetAccessBits(byte *accessBitBuffer, byte g0, byte g1, byte g2, byte g3);
bool MIFARE_OpenUidBackdoor(bool logErrors);
bool MIFARE_SetUid(byte* newUid, byte uidSize, bool logErrors);
bool MIFARE_UnbrickUidSector(bool logErrors);
bool MIFARE_OpenUidBackdoor(bool logErrors);
bool MIFARE_SetUid(byte* newUid, byte uidSize, bool logErrors);
bool MIFARE_UnbrickUidSector(bool logErrors);
/////////////////////////////////////////////////////////////////////////////////////
// Convenience functions - does not add extra functionality
/////////////////////////////////////////////////////////////////////////////////////
bool PICC_IsNewCardPresent();
bool PICC_ReadCardSerial();
private:
byte _chipSelectPin; // Arduino pin connected to MFRC522's SPI slave select input (Pin 24, NSS, active low)
byte _resetPowerDownPin; // Arduino pin connected to MFRC522's reset and power down input (Pin 6, NRSTPD, active low)