libs/JCButton
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Rename library & repository from Button to JC_Button.

Browse Source
This commit is contained in:
JChristensen
2018-05-10 17:37:47 -04:00
parent 3b10b31c5f
commit beb7a91bd9
7 changed files with 37 additions and 47 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
examples/UpDown/UpDown.ino
View File

@@ -13,22 +13,22 @@
* San Francisco, California, 94105, USA. *
*----------------------------------------------------------------------*/
#include <Button.h> //https://github.com/JChristensen/Button
#include <JC_Button.h> //https://github.com/JChristensen/JC_Button
#define DN_PIN 2 //Connect two tactile button switches (or something similar)
#define UP_PIN 3 //from Arduino pin 2 to ground and from pin 3 to ground.
#define DN_PIN 7 //Connect two tactile button switches (or something similar)
#define UP_PIN 8 //from Arduino pin 7 to ground and from pin 8 to ground.
#define PULLUP true //To keep things simple, we use the Arduino's internal pullup resistor.
#define INVERT true //Since the pullup resistor will keep the pin high unless the
//switch is closed, this is negative logic, i.e. a high state
//means the button is NOT pressed. (Assuming a normally open switch.)
#define DEBOUNCE_MS 20 //A debounce time of 20 milliseconds usually works well for tactile button switches.
#define DEBOUNCE_MS 25 //A debounce time of 20 milliseconds usually works well for tactile button switches.
#define REPEAT_FIRST 500 //ms required before repeating on long press
#define REPEAT_INCR 100 //repeat interval for long press
#define MIN_COUNT 0
#define MAX_COUNT 59
Button btnUP(UP_PIN, PULLUP, INVERT, DEBOUNCE_MS); //Declare the buttons
Button btnUP(UP_PIN, PULLUP, INVERT, DEBOUNCE_MS); //Define the buttons
Button btnDN(DN_PIN, PULLUP, INVERT, DEBOUNCE_MS);
enum {WAIT, INCR, DECR}; //The possible states for the state machine
@@ -37,12 +37,12 @@ int count; //The number that is adjusted
int lastCount = -1; //Previous value of count (initialized to ensure it's different when the sketch starts)
unsigned long rpt = REPEAT_FIRST; //A variable time that is used to drive the repeats for long presses
void setup(void)
void setup()
{
Serial.begin(115200);
}
void loop(void)
void loop()
{
btnUP.read(); //read the buttons
btnDN.read();