extruder + doc

printer.cfg

@@ -54,6 +54,28 @@ serial: /dev/serial/by-id/usb-Klipper_stm32g0b1xx_hurakan-if00
   position_min: -10
   homing_speed: 40
 
+[extruder]
+  step_pin: PB3
+  dir_pin: PB4
+  enable_pin: !PD5
+  microsteps: 16
+  rotation_distance: 10.07
+  nozzle_diameter: 0.400
+  filament_diameter: 1.74
+  heater_pin: EBBCan: PB13
+  control: pid
+  pid_Kp: 21.527
+  pid_Ki: 1.063
+  pid_Kd: 108.982
+  min_temp: 0 
+  max_temp: 270
+  sensor_type:MAX31865
+  sensor_pin: EBBCan: PA4
+  spi_bus: spi1
+  rtd_nominal_r: 100
+  rtd_reference_r: 430
+  rtd_num_of_wires: 2
+  pressure_advance: 0.78
 
 [filament_switch_sensor extruder_filament_sensor]
   switch_pin: ^!PC15
@@ -117,28 +139,6 @@ run_current: 0.800
 
 
 
-[extruder]
-  step_pin: PL7
-  dir_pin: !PL6
-  enable_pin: !PC0
-  microsteps: 16
-  rotation_distance: 10.07
-  nozzle_diameter: 0.400
-  filament_diameter: 1.74
-  heater_pin: EBBCan: PB13
-  control: pid
-  pid_Kp: 21.527
-  pid_Ki: 1.063
-  pid_Kd: 108.982
-  min_temp: 0 
-  max_temp: 270
-  sensor_type:MAX31865
-  sensor_pin: EBBCan: PA4
-  spi_bus: spi1
-  rtd_nominal_r: 100
-  rtd_reference_r: 430
-  rtd_num_of_wires: 2
-  pressure_advance: 0.78
 
 
   [include mainsail.cfg]