44 lines
1.0 KiB
INI
44 lines
1.0 KiB
INI
# This file contains common pin mappings for the BIGTREETECH EBBCan
|
|
# Canbus board. To use this config, the firmware should be compiled for the
|
|
# STM32G0B1 with "8 MHz crystal" and "USB (on PA11/PA12)" or "CAN bus (on PB0/PB1)".
|
|
# The "EBB Can" micro-controller will be used to control the components on the nozzle.
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
# [mcu EBBCan]
|
|
# canbus_uuid: 82edf63bd1a9
|
|
|
|
[adxl345]
|
|
cs_pin: EBBCan: PB12
|
|
spi_software_sclk_pin: EBBCan: PB10
|
|
spi_software_mosi_pin: EBBCan: PB11
|
|
spi_software_miso_pin: EBBCan: PB2
|
|
axes_map: x,y,z
|
|
|
|
[fan]
|
|
pin: EBBCan: PA0
|
|
|
|
[heater_fan hotend_fan]
|
|
pin: EBBCan: PA1
|
|
heater: extruder
|
|
heater_temp: 50.0
|
|
|
|
[bltouch]
|
|
sensor_pin: ^EBBCan:PB8
|
|
control_pin: EBBCan:PB9
|
|
z_offset: 1.230
|
|
|
|
# [tmc2209 extruder]
|
|
# uart_pin: EBBCan: PA15
|
|
# run_current: 0.650
|
|
# stealthchop_threshold: 999999
|
|
|
|
#[neopixel hotend_rgb]
|
|
#pin: EBBCan:PD3
|
|
|
|
#[filament_switch_sensor switch_sensor]
|
|
#switch_pin: EBBCan:PB4
|
|
|
|
#[filament_motion_sensor motion_sensor]
|
|
#switch_pin: ^EBBCan:PB3
|