substitutions:
  device_name: "zigbee_server"
  friendly_name: "Zigbee server"
  comment: "esp32, POE eth zigbee"
  location: "hass"
  api_password: !secret zigbee_server_api
  ota_password: !secret ota_password
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  gateway: !secret ip_gateway
  subnet: !secret ip_subnet
  dns1: !secret ip_dns1
  dns2: !secret ip_dns2
  ip: !secret zigbee_server_ip
  pin_button: GPIO39
  pin_leds: GPIO25
  pin_mdc: GPIO23
  pin_mdio: GPIO18
  pin_clk: GPIO17_OUT
  pin_power: GPIO5
  pin_efrReset: GPIO33
  pin_efrTX: GPIO12
  pin_efrRX: GPIO16


packages:
  board: !include boards/esp32_wroom_arduino.yaml
  # connection: !include common/wifi.yaml
  device_base: !include common/common.yaml
  ethernet: !include interfaces/eth_LAN8720A.yaml
  bt_proxy: !include common/bluetooth.yaml

  ota: !include common/ota.yaml
  logger: !include templates/nologger.yaml
  uptimesensor: !include sensors/uptime.yaml
  time: !include templates/time.yaml

external_components:
  - source: github://tube0013/esphome-stream-server-v2
  - source: github://syssi/esphome-zeroconf@main

# web_server:
#   port: 80

# switch:
#   - platform: gpio
#     pin: ${pin_efrReset}
#     id: zRST_gpio
#     inverted: yes
#     restore_mode: ALWAYS_OFF


button:    
- platform: restart
  name: "Restart the Gateway"
  disabled_by_default: true

uart:
  id: uart_bus
  tx_pin: ${pin_efrTX}
  rx_pin: ${pin_efrRX}
  baud_rate: 115200
  stop_bits: 1

stream_server:
  uart_id: uart_bus
  id: ss
  port: 6638 # optional, default is 6638

binary_sensor:
  - platform: stream_server
    stream_server: ss
    name: "TubesZB Serial Connected"

zeroconf:
  - service: tubeszb
    protocol: tcp
    port: 6638
    txt:
      version: 1.0
      name: TubesZB
      radio_type: ember
      baud_rate: 115200
      data_flow_control: software