substitutions:
  device_name: "watervalve"
  friendly_name: "WaterValve Garage"
  comment: "ESP8266, tuya-hack"
  location: "Garage"
  api_password: !secret watervalve_api
  ota_password: !secret ota_password
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  gateway: !secret ip_gateway
  subnet: !secret ip_subnet
  ip: !secret watervalve_ip
  pin_status: GPIO0
  pin_motor: GPIO13
  pin_button: GPIO12

packages:
  board: !include boards/esp12f.yaml
  connection: !include common/wifi.yaml
  device_base: !include common/common.yaml
  status: !include templates/status.yaml
  logger: !include templates/logger.yaml

switch:
  - platform: gpio
    id: valveMotor
    pin: ${pin_motor}
    name: "Valve"
    icon: mdi:pipe-valve
    internal: true

binary_sensor:
  - platform: gpio
    name: "Button"
    pin: ${pin_button}
    on_click:
      min_length: 50ms
      max_length: 1000ms
      then:
       - sprinkler.start_full_cycle: tuin_sprinkler_ctrlr
    on_double_click: 
      then:
        - sprinkler.shutdown: tuin_sprinkler_ctrlr

sprinkler:
  - id: tuin_sprinkler_ctrlr
    multiplier_number: "Herhaling"
    valves:
      - valve_switch: "hoofd klep"
        run_duration_number: "hoofd klep timer"
        valve_switch_id: valveMotor

sensor:
  - platform: template
    name: "Resterende tijd"
    lambda: |-
      if (id(tuin_sprinkler_ctrlr).time_remaining_active_valve().has_value()) {
        // the controller is running, print the number of seconds remaining
        return id(tuin_sprinkler_ctrlr).time_remaining_active_valve().value();
      } else {
        // the controller is NOT running
       return 0;
      }
    unit_of_measurement: s
    accuracy_decimals: 0
    device_class: "duration"
    update_interval: 1s