substitutions:
  esp_name: "ir-004-c3"

external_components:
  - source: github://Jorre05/remote_receiver
    components: [ remote_receiver ]

esphome:
  name: ${esp_name}
  comment: ${esp_name}

esp32:
  variant: ESP32C3
  board: esp32dev
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
      CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y
      CONFIG_ESP_TASK_WDT_TIMEOUT_S: "10"    


# Enable logging
logger:
  baud_rate: 0
  
# uart:
#   rx_pin: GPIO3
#   tx_pin: GPIO1
#   baud_rate: 9600

# Enable Home Assistant API
api:
  encryption:
    key: !secret hvac_woonkamer_api

ota:
  password: !secret hvac_woonkamer_ota

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: ${esp_name} fallback
    password: !secret fallback_password

#bluetooth_proxy:

time:
  - platform: homeassistant
    id: homeassistant_time

remote_transmitter:
  pin: GPIO3
  carrier_duty_percent: 50%

status_led:
  pin: GPIO18

remote_receiver:
  id: rcvr
  pin:
    number: GPIO19 #ESP32-C3 #GPIO5 ESP8266
    inverted: true
    # mode:
    #   input: true
    #   pullup: true
  tolerance: 55%
  dump: all

climate:
  - platform: fujitsu_general
    name: "Airco"
    receiver_id: rcvr

# binary_sensor:
#   - platform: gpio
#     name: "Button"
#     id: button
#     pin:
#       number: GPIO5 
#       mode: INPUT_PULLUP
#       inverted: True

  
#GPIO4 - status   (ESP32-C3 = GPIO18)
#GPIO5 - IR rcvr. (ESP32-C3 = GPIO19)
#GPIO14 - IR tx   (ESP32-C3 = GPIO3) 
#GPIO13 - button. (ESP32-C3 = GPIO5)
#GPIO2 - strapping to 3v3 (ESP32-C3 specific)