substitutions:
  device_name: "tuyaplug001"
  friendly_name: "tuya plug 001"
  comment: "eps-02S, tuya-hack"
  location: "zolder"
  api_password: !secret tuya_plug_api
  ota_password: !secret ota_password
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  gateway: !secret ip_gateway
  subnet: !secret ip_subnet
  ip: !secret tuya_plug_001_ip
  pin_relay: GPIO14
  pin_button: GPIO1
  pin_status: GPIO13
  pin_cf: GPIO05
  pin_cf1: GPIO04
  pin_sel: GPIO12



packages:
  board: !include boards/esp01.yaml
  connection: !include common/wifi.yaml
  device_base: !include common/common.yaml
  status: !include templates/status.yaml
  logger: !include templates/nologger.yaml


binary_sensor:
  - platform: gpio
    pin:
      number: ${pin_button}
      mode:
        input: true
        pullup: true
      inverted: true
    name: "Button"
    on_press:
      - switch.toggle: relay

switch:
  # the power relay
  - platform: gpio
    id: relay
    pin: ${pin_relay}
    name: '${device_name}'
    restore_mode: RESTORE_DEFAULT_ON  # attempt to restore state on start and defaults to OFF if failed
    icon: mdi:power-socket-de

sensor:
  - platform: hlw8012
    model: BL0937  # note that the model must be specified to use special calculation parameters
    current_resistor: 0.001  # adjust it according to the actual resistor value on board
    voltage_divider: 2012  # (2008.1K)/998 = 2004, adjust it according to the actual resistor values on board
    sel_pin:
      number: ${pin_sel}
      inverted: true  # the logic of BL0937 is opposite from HLW8012
    cf_pin: ${pin_cf}
    cf1_pin: ${pin_cf1} 
    current:
      name: '${device_name} Current'
    voltage:
      name: '${device_name} Voltage'
    power:
      name: '${device_name} Power'
    energy:
      name: '${device_name} Energy'
      # convert to kWh
      filters:
        - multiply: 0.001
      unit_of_measurement: 'kWh'
      accuracy_decimals: 4
    update_interval: 10s
    change_mode_every: 3