substitutions:
  device_name: "badkamerradfan"
  friendly_name: "badkamerradfan"
  comment: "esp32-c3"
  location: "badkamer"
  api_password: !secret badkamerradfan_api
  ota_password: !secret ota_password
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  gateway: !secret ip_gateway
  subnet: !secret ip_subnet
  ip: !secret badkamerradfan_ip
  pin_temp: GPIO3
  pin_pwm: GPIO4
  pin_tach: GPIO2
  pin_status: GPIO8
  ledc_freq: "16000"

packages:
  board: !include boards/esp32-C3.yaml
  device_base: !include common/common.yaml
  connection: !include common/wifi.yaml
  status: !include templates/status.yaml
  logger: !include templates/logger.yaml

output:
  - platform: ledc
    pin: ${pin_pwm}
    id: pwm1
    frequency: ${ledc_freq}

fan:
  - platform: speed
    output: pwm1
    name: "Badkamer radiator Fan"
    id: badkamerfan
    restore_mode: RESTORE_DEFAULT_ON

# Example configuration entry
dallas:
  - pin: ${pin_temp}

# Individual sensors
sensor:
  - platform: dallas
    address: 0x59800000081fd028
    name: "Radiataor Temperature"
    id: radtemperature
    on_value_range:
    - above: !lambda return id(TemperatureOn).state;
      then:
        - fan.turn_on: badkamerfan
    - below: !lambda return id(TemperatureOff).state;
      then:
        - fan.turn_off: badkamerfan

number:
  - platform: template
    name: "Fan on temp"
    id: TemperatureOn
    optimistic: true
    min_value: 15
    max_value: 65
    restore_value: True
    initial_value: 28
    step: 1

  - platform: template
    name: "Fan off temp"
    id: TemperatureOff
    optimistic: true
    min_value: 15
    max_value: 65
    restore_value: True
    initial_value: 24
    step: 1