substitutions:
  esp_name: "hvac-ir-sensor-display"

esphome:
  name: ${esp_name}
  comment: ${esp_name}

esp8266:
  board: nodemcuv2

# Enable logging
logger:
  baud_rate: 0
  
uart:
  rx_pin: GPIO3
  tx_pin: GPIO1
  baud_rate: 9600

# Enable Home Assistant API
api:
  encryption:
    key: !secret hvac_woonkamer_api

ota:
  password: !secret hvac_woonkamer_ota

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: ${esp_name} fallback
    password: !secret fallback_password

time:
  - platform: homeassistant
    id: homeassistant_time

remote_transmitter:
  pin: GPIO14
  carrier_duty_percent: 50%

status_led:
  pin: GPIO4

remote_receiver:
  id: rcvr
  pin:
    number: GPIO5
    inverted: true
    # mode:
    #   input: true
    #   pullup: true
  tolerance: 55%
  dump: all

climate:
  - platform: fujitsu_general
    name: "Airco Woonkamer"
    receiver_id: rcvr
  # visual:
  #   min_temperature: 18
  #   max_temperature: 25
  #   temperature_Step: 1
  
tuya:
  status_pin: GPIO16
  time_id: homeassistant_time

sensor:
  - platform: "tuya"
    name: "Temperature"
    sensor_datapoint: 101
    unit_of_measurement: "°C"
    device_class: "temperature"
    state_class: "measurement"
    filters:
      - multiply: 0.1
    accuracy_decimals: 1

  - platform: "tuya"
    name: "humidity"
    sensor_datapoint: 102
    unit_of_measurement: "%rh"
    device_class: "humidity"
    state_class: "measurement"
    accuracy_decimals: 1