esphome:
  name: tubeszb-dual-radio-kit-cc2652
  project: 
    name: tubezb.cc2652+zw
    version: "3.0"
  on_boot:
    priority: 600
    then:
      - switch.turn_on: zRST_gpio
      - delay: 15ms
      - switch.turn_off: zRST_gpio
      - lambda: |-
          id(mdns0).add_extra_service({ "_zigbee-coordinator", "_tcp", 6638, {{"radio_type", "znp"}, {"name", "TubesZB"},{"serial_number", get_mac_address()}} });
          id(mdns0).add_extra_service({ "_zwave", "_tcp", 6639, {{"version", "1.0"}, {"name", "TubesZB"},{"serial_number", get_mac_address()}} });
esp32:
  board: esp32-poe
  framework:
    type: esp-idf

external_components:
  - source: github://oxan/esphome-stream-server


#Olimex ESP32-PoE Ethernet
ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0
  power_pin: GPIO5
  
# Optional manual IP
  # manual_ip:
  #   static_ip: STATIC_IP
  #   gateway: GATEWAY
  #   subnet: SUBNET


# Enable logging
logger:
  level: DEBUG
  
# Enable Home Assistant API
api:
  reboot_timeout: 0s

ota:
  platform: esphome

web_server:
  port: 80
  local: true


script:
  - id: fw_update_mode
    then:
      - switch.turn_on: zBSL
      - delay: 1s
      - switch.turn_on: zRST_gpio
      - delay: 1s
      - switch.turn_off: zRST_gpio
      - logger.log: "Delaying ~10 seconds for cc2652p2 to settle"
      - delay: 11s
      - switch.turn_off: zBSL
      - logger.log: "Please try update with cc2538-bsl tool now"
      - logger.log: "cc-bsl usage: cc2538-bsl.py -p socket://ip-of-gw:6638 -evw firmware.hex"
      
switch:
  - platform: gpio
    pin: 16
    id: zRST_gpio
    inverted: no
    restore_mode: ALWAYS_OFF

  - platform: gpio
    pin: 33
    id: z_mode
    restore_mode: ALWAYS_OFF
    name: "zigbee-uart mode"
    on_turn_on: 
      then:
        - light.turn_on: usb_led
    on_turn_off: 
      then:
        - light.turn_off: usb_led
      
  - platform: gpio
    pin: 15
    name: "Zigbee Module Bootloader Pin"
    id: zBSL
    inverted: no
    restore_mode: ALWAYS_OFF
    disabled_by_default: false

output:
  - platform: gpio
    pin: GPIO12
    id: LED_USB

button:
  - platform: restart
    name: "Restart the ESP32 Device"

  - platform: template
    name: "Trigger Zigbee Module Reset"
    disabled_by_default: false
    id: zRST
    on_press:
      - switch.turn_on: zRST_gpio
      - delay: 15ms
      - switch.turn_off: zRST_gpio

  - platform: template
    name: "Trigger Zigbee Module Bootloader"
    disabled_by_default: false
    on_press:
      - script.execute: fw_update_mode

light:
  - platform: status_led
    name: "state"
    pin: GPIO14
  - platform: binary
    name: "usb_led"
    output: LED_USB
    id: usb_led

uart:
  - id: uart_bus_zb
    rx_pin: GPIO36
    tx_pin: GPIO4
    baud_rate: 115200
  #  rx_buffer_size: 1024
  - id: uart_bus_zw
    rx_pin: GPIO13
    tx_pin: GPIO2
    baud_rate: 115200

stream_server:
  - id: zb
    uart_id: uart_bus_zb
    port: 6638 # optional, default is 6638
  #  buffer_size: 1024
  - id: zw
    uart_id: uart_bus_zw
    port: 6639

binary_sensor:
  - platform: stream_server
    stream_server: zb
    connected:
      name: "TubesZB Zigbee Serial Connected"
  - platform: stream_server
    stream_server: zw
    connected:
      name: "TubesZB Z-Wave Serial Connected"

mdns:
  id: mdns0