substitutions:
  device_name: "wekker"
  friendly_name: "wekker"
  comment: "esp32, lcd wt32-sc01"
  location: "slaaplamer"
  api_password: !secret wekker_api
  ota_password: !secret ota_password
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  gateway: !secret ip_gateway
  subnet: !secret ip_subnet
  ip: !secret wekker_ip
  # pin_bl: GPIO23
  # pin_clk: GPIO14
  # pin_mosi: GPIO13
  # pin_miso: GPIO12
  # pin_cs: GPIO15
  # pin_dc: GPIO21
  # pin_lcdrst: GPIO22
  # pin_sda: GPIO18
  # pin_scl: GPIO19

esphome:
  name: ${device_name}
esp32:
  board: esp-wrover-kit
  framework:
    type: arduino

# packages:
#   device_base: !include includes/common_settings.yaml

#esp32_ble_tracker:

#bluetooth_proxy:
#    active: true

# time:
#   - platform: homeassistant
#     id: homeassistant_time

# output:
#   - platform: gpio
#     pin: GPIO23
#     id: tst_Backlight

# light:
#   - platform: binary
#     name: "${friendly_name} Back Light"
#     output: tst_Backlight    
#     id: ${id_prefix}_backlight
#     restore_mode: ALWAYS_ON

# spi:
#   clk_pin: GPIO14
#   mosi_pin: GPIO13
#   miso_pin: GPIO12

# display:
#   - platform: ili9xxx
#     id: ${id_prefix}_display
#     model: ST7796
#     cs_pin: GPIO15
#     dc_pin: GPIO21
#     reset_pin: GPIO22
#     rotation: 270
#     pages:
#       - id: page1
#         lambda: |-
#           it.printf(64,0, id(my_font), TextAlign::TOP_CENTER, "WT32-SC01");
#           it.strftime(64, 40, id(my_font), TextAlign::BASELINE_CENTER, "%I:%M:%S %p", id(homeassistant_time).now());
#           it.printf(64, 60, id(my_font), TextAlign::BOTTOM_CENTER, "Time");
#       - id: page2
#         lambda: |-
#           it.printf(64,0, id(my_font), TextAlign::TOP_CENTER, "WT32-SC01");
#           it.printf(64, 40, id(my_font), TextAlign::BASELINE_CENTER, "Hello Loryan!");
#           it.printf(64, 60, id(my_font), TextAlign::BOTTOM_CENTER, "Hi from down here");

# font:
#   - file:
#       type: gfonts
#       family: "Open Sans"
#     id: my_font
#     size: 20

# color:
#   - id: my_red
#     red: 100%
#     green: 3%
#     blue: 5%
#   - id: my_white
#     red: 100%
#     green: 100%
#     blue: 100%

# interval:
#   - interval: 5s
#     then:
#       - display.page.show_next: wt32_sc01_display
#       - component.update: wt32_sc01_display