20260326

esphome/archive/uzg-poe-dr.yaml

@@ -0,0 +1,161 @@
+esphome:
+  name: tubeszb-dual-radio-kit-cc2652
+  project: 
+    name: tubezb.cc2652+zw
+    version: "3.0"
+  on_boot:
+    priority: 600
+    then:
+      - switch.turn_on: zRST_gpio
+      - delay: 15ms
+      - switch.turn_off: zRST_gpio
+      - lambda: |-
+          id(mdns0).add_extra_service({ "_zigbee-coordinator", "_tcp", 6638, {{"radio_type", "znp"}, {"name", "TubesZB"},{"serial_number", get_mac_address()}} });
+          id(mdns0).add_extra_service({ "_zwave", "_tcp", 6639, {{"version", "1.0"}, {"name", "TubesZB"},{"serial_number", get_mac_address()}} });
+esp32:
+  board: esp32-poe
+  framework:
+    type: esp-idf
+
+external_components:
+  - source: github://oxan/esphome-stream-server
+
+
+#Olimex ESP32-PoE Ethernet
+ethernet:
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO17_OUT
+  phy_addr: 0
+  power_pin: GPIO5
+  
+# Optional manual IP
+  # manual_ip:
+  #   static_ip: STATIC_IP
+  #   gateway: GATEWAY
+  #   subnet: SUBNET
+
+
+# Enable logging
+logger:
+  level: DEBUG
+  
+# Enable Home Assistant API
+api:
+  reboot_timeout: 0s
+
+ota:
+  platform: esphome
+
+web_server:
+  port: 80
+  local: true
+
+
+script:
+  - id: fw_update_mode
+    then:
+      - switch.turn_on: zBSL
+      - delay: 1s
+      - switch.turn_on: zRST_gpio
+      - delay: 1s
+      - switch.turn_off: zRST_gpio
+      - logger.log: "Delaying ~10 seconds for cc2652p2 to settle"
+      - delay: 11s
+      - switch.turn_off: zBSL
+      - logger.log: "Please try update with cc2538-bsl tool now"
+      - logger.log: "cc-bsl usage: cc2538-bsl.py -p socket://ip-of-gw:6638 -evw firmware.hex"
+      
+switch:
+  - platform: gpio
+    pin: 16
+    id: zRST_gpio
+    inverted: no
+    restore_mode: ALWAYS_OFF
+
+  - platform: gpio
+    pin: 33
+    id: z_mode
+    restore_mode: ALWAYS_OFF
+    name: "zigbee-uart mode"
+    on_turn_on: 
+      then:
+        - light.turn_on: usb_led
+    on_turn_off: 
+      then:
+        - light.turn_off: usb_led
+      
+  - platform: gpio
+    pin: 15
+    name: "Zigbee Module Bootloader Pin"
+    id: zBSL
+    inverted: no
+    restore_mode: ALWAYS_OFF
+    disabled_by_default: false
+
+output:
+  - platform: gpio
+    pin: GPIO12
+    id: LED_USB
+
+button:
+  - platform: restart
+    name: "Restart the ESP32 Device"
+
+  - platform: template
+    name: "Trigger Zigbee Module Reset"
+    disabled_by_default: false
+    id: zRST
+    on_press:
+      - switch.turn_on: zRST_gpio
+      - delay: 15ms
+      - switch.turn_off: zRST_gpio
+
+  - platform: template
+    name: "Trigger Zigbee Module Bootloader"
+    disabled_by_default: false
+    on_press:
+      - script.execute: fw_update_mode
+
+light:
+  - platform: status_led
+    name: "state"
+    pin: GPIO14
+  - platform: binary
+    name: "usb_led"
+    output: LED_USB
+    id: usb_led
+
+uart:
+  - id: uart_bus_zb
+    rx_pin: GPIO36
+    tx_pin: GPIO4
+    baud_rate: 115200
+  #  rx_buffer_size: 1024
+  - id: uart_bus_zw
+    rx_pin: GPIO13
+    tx_pin: GPIO2
+    baud_rate: 115200
+
+stream_server:
+  - id: zb
+    uart_id: uart_bus_zb
+    port: 6638 # optional, default is 6638
+  #  buffer_size: 1024
+  - id: zw
+    uart_id: uart_bus_zw
+    port: 6639
+
+binary_sensor:
+  - platform: stream_server
+    stream_server: zb
+    connected:
+      name: "TubesZB Zigbee Serial Connected"
+  - platform: stream_server
+    stream_server: zw
+    connected:
+      name: "TubesZB Z-Wave Serial Connected"
+
+mdns:
+  id: mdns0