periodic push

2023-06-29 16:14:36 +02:00
parent c948b95622
commit 831f676068
267 changed files with 17705 additions and 10864 deletions
--- a/esphome/old_configs/aqs_woonkamer_oud.yaml
+++ b/esphome/old_configs/aqs_woonkamer_oud.yaml
@@ -0,0 +1,34 @@
+substitutions:
+  device_name: "esp32-aqs1"
+  friendly_name: "AQS-woonkamer_oud"
+  comment: "esp32, pm, co2, display, btprox"
+  location: "prullenbak"
+  api_password: !secret air_quality_woonkamer_oud_api
+  ota_password: !secret ota_password
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  gateway: !secret ip_gateway
+  subnet: !secret ip_subnet
+  ip: !secret air_quality_woonkamer_oud_ip
+  pin_pm_rx: GPIO19
+  pin_pm_tx: GPIO26
+  pin_sda: GPIO21
+  pin_scl: GPIO22
+
+packages:
+  board: !include boards/esp32_wroom_arduino.yaml
+  i2c: !include interfaces/i2c_a.yaml
+  device_base: !include common/common.yaml
+  connection: !include common/wifi.yaml
+  logger: !include templates/logger.yaml
+  bt_proxy: !include templates/ble_proxy.yaml
+  pmsc: !include sensors/pmsx0003.yaml
+  co2: !include sensors/scd30.yaml
+  tvoc: !include sensors/sgp30.yaml
+
+#display pins
+# spi:
+#   clk_pin: GPIO18
+#   mosi_pin: GPIO23
+#   miso_pin: GPIO12
+
--- a/esphome/old_configs/esp32-atom-matrix.yaml
+++ b/esphome/old_configs/esp32-atom-matrix.yaml
@@ -0,0 +1,120 @@
+substitutions:
+  esp_name: "esp32-atom-matrix"
+
+esphome:
+  name: ${esp_name}
+  comment: ${esp_name}
+
+
+esp32:
+  board: m5stack-atom
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret esp32-atom-matrix_api
+
+ota:
+  password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: ${esp_name} fallback
+    password: !secret fallback_password
+
+captive_portal:
+
+globals:
+  - id: display_index
+    type: int
+    restore_value: no
+    initial_value: '7'
+  - id: display_index_def
+    type: int
+    restore_value: no
+    initial_value: '17'
+
+
+# Define I2C interface
+i2c:
+  sda: 25
+  scl: 21
+  scan: true
+  #frequency: 200kHz
+
+font:
+  - file: "fonts/5x5.ttf"
+    id: matrix_font
+    size: 10
+
+binary_sensor:
+  - platform: gpio # btn
+    id: button
+    pin:
+      number: 39
+      inverted: true
+# --- End if binary_sensor: --- #
+    
+light:
+  - platform: fastled_clockless
+    chipset: WS2812B
+    pin: GPIO27
+    num_leds: 25
+    rgb_order: GRB
+    name: "led_matrix"
+    id: led_matrix_light
+    default_transition_length: 0s
+    color_correct: [50%, 50%, 50%]
+    restore_mode: ALWAYS_ON
+
+display:
+  - platform: addressable_light
+    id: led_matrix_display
+    addressable_light_id: led_matrix_light
+    width: 5
+    height: 5
+    rotation: 90°
+    update_interval: 200ms
+    lambda: |-
+          // Draw a bulls-eye pattern
+          Color red = Color(0xFF0000);
+          Color green = Color(0x00FF00);
+          Color blue = Color(0x0000FF);
+          it.printf(id(display_index), -4, id(matrix_font), blue, TextAlign::TOP_LEFT, "Tim");
+          if(id(display_index) <= id(display_index_def)*-1)
+          {
+            id(display_index) = 7;
+          }
+          else
+          {
+            id(display_index) -= 1;
+          }
+# --- End of light: --- #
+
+# sensor:
+#   - platform: mpu6886
+#     address: 0x68
+#     update_interval: 1s  # Defaults to 60s, but seems to work fine up to at least 300ms
+#     accel_x:
+#       name: "MPU6886 Accel X"
+#     accel_y:
+#       name: "MPU6886 Accel Y"
+#     accel_z:
+#       name: "MPU6886 Accel z"
+#     gyro_x:
+#       name: "MPU6886 Gyro X"
+#     gyro_y:
+#       name: "MPU6886 Gyro Y"
+#     gyro_z:
+#       name: "MPU6886 Gyro z"
+#     temperature:
+#       name: "MPU6886 Temperature"
--- a/esphome/old_configs/ir-004-c3.yaml_old
+++ b/esphome/old_configs/ir-004-c3.yaml_old
@@ -0,0 +1,92 @@
+substitutions:
+  esp_name: "ir-004-c3"
+
+external_components:
+  - source: github://Jorre05/remote_receiver
+    components: [ remote_receiver ]
+
+esphome:
+  name: ${esp_name}
+  comment: ${esp_name}
+
+esp32:
+  variant: ESP32C3
+  board: esp32dev
+  framework:
+    type: esp-idf
+    sdkconfig_options:
+      CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
+      CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y
+      CONFIG_ESP_TASK_WDT_TIMEOUT_S: "10"    
+
+
+# Enable logging
+logger:
+  baud_rate: 0
+  
+# uart:
+#   rx_pin: GPIO3
+#   tx_pin: GPIO1
+#   baud_rate: 9600
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret hvac_woonkamer_api
+
+ota:
+  password: !secret hvac_woonkamer_ota
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: ${esp_name} fallback
+    password: !secret fallback_password
+
+#bluetooth_proxy:
+
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+remote_transmitter:
+  pin: GPIO3
+  carrier_duty_percent: 50%
+
+status_led:
+  pin: GPIO18
+
+remote_receiver:
+  id: rcvr
+  pin:
+    number: GPIO19 #ESP32-C3 #GPIO5 ESP8266
+    inverted: true
+    # mode:
+    #   input: true
+    #   pullup: true
+  tolerance: 55%
+  dump: all
+
+climate:
+  - platform: fujitsu_general
+    name: "Airco"
+    receiver_id: rcvr
+
+# binary_sensor:
+#   - platform: gpio
+#     name: "Button"
+#     id: button
+#     pin:
+#       number: GPIO5 
+#       mode: INPUT_PULLUP
+#       inverted: True
+
+  
+#GPIO4 - status   (ESP32-C3 = GPIO18)
+#GPIO5 - IR rcvr. (ESP32-C3 = GPIO19)
+#GPIO14 - IR tx   (ESP32-C3 = GPIO3) 
+#GPIO13 - button. (ESP32-C3 = GPIO5)
+#GPIO2 - strapping to 3v3 (ESP32-C3 specific)
--- a/esphome/old_configs/vw-bus.yaml
+++ b/esphome/old_configs/vw-bus.yaml
@@ -0,0 +1,95 @@
+substitutions:
+  esp_name: "vw-bus"
+
+esphome:
+  name: ${esp_name}
+  comment: ${esp_name}
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret vw_bus_api
+
+ota:
+  password: !secret vw_bus_ota
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: ${esp_name} fallback
+    password: !secret fallback_password
+
+captive_portal:
+    
+output:
+  - platform: ledc
+    pin: GPIO5
+    id: INTERIOUR
+  - platform: ledc
+    pin: GPIO18
+    id: DIM_FL
+  - platform: ledc
+    pin: GPIO27
+    id: DIM_FR
+  - platform: ledc
+    pin: GPIO4
+    id: BLINK_FL
+  - platform: ledc
+    pin: GPIO17
+    id: BLINK_FR
+  - platform: ledc
+    pin: GPIO14
+    id: DIM_RL
+  - platform: ledc
+    pin: GPIO26
+    id: DIM_RR
+
+light:
+  - platform: monochromatic
+    output: INTERIOUR
+    name: "Interiour lights"
+  - platform: monochromatic
+    output: DIM_FL
+    name: "Dim FL"
+  - platform: monochromatic
+    output: DIM_FR
+    name: "Dim FR"
+  - platform: monochromatic
+    output: DIM_RL
+    name: "Dim RL"
+    effects:
+      - pulse:
+          transition_length: 0.3s
+          update_interval: 0.5s
+  - platform: monochromatic
+    output: DIM_RR
+    name: "Dim RR"
+    effects:
+      - pulse:
+          transition_length: 0.3s
+          update_interval: 0.5s
+  - platform: monochromatic
+    output: BLINK_FL
+    name: "Blink FL"
+    effects:
+      - pulse:
+          transition_length: 0.3s
+          update_interval: 0.5s
+  - platform: monochromatic
+    output: BLINK_FR
+    name: "Blink FR"
+    effects:
+      - pulse:
+          transition_length: 0.3s
+          update_interval: 0.5s