backup 20240718

esphome/zigbee-server.yaml

@@ -1,83 +0,0 @@
-substitutions:
-  device_name: "zigbee_server"
-  friendly_name: "Zigbee server"
-  comment: "esp32, POE eth zigbee"
-  location: "hass"
-  api_password: !secret zigbee_server_api
-  ota_password: !secret ota_password
-  wifi_ssid: !secret wifi_ssid
-  wifi_password: !secret wifi_password
-  gateway: !secret ip_gateway
-  subnet: !secret ip_subnet
-  dns1: !secret ip_dns1
-  dns2: !secret ip_dns2
-  ip: !secret zigbee_server_ip
-  pin_button: GPIO39
-  pin_leds: GPIO25
-  pin_mdc: GPIO23
-  pin_mdio: GPIO18
-  pin_clk: GPIO17_OUT
-  pin_power: GPIO5
-  pin_efrReset: GPIO33
-  pin_efrTX: GPIO12
-  pin_efrRX: GPIO16
-
-
-packages:
-  board: !include boards/esp32_wroom_arduino.yaml
-  # connection: !include common/wifi.yaml
-  device_base: !include common/common.yaml
-  ethernet: !include interfaces/eth_LAN8720A.yaml
-  # bt_proxy: !include templates/ble_proxy.yaml
-  ota: !include common/ota.yaml
-  logger: !include templates/nologger.yaml
-  uptimesensor: !include sensors/uptime.yaml
-  time: !include templates/time.yaml
-
-external_components:
-  - source: github://tube0013/esphome-stream-server-v2
-  - source: github://syssi/esphome-zeroconf@main
-
-# web_server:
-#   port: 80
-
-# switch:
-#   - platform: gpio
-#     pin: ${pin_efrReset}
-#     id: zRST_gpio
-#     inverted: yes
-#     restore_mode: ALWAYS_OFF
-
-
-button:    
-- platform: restart
-  name: "Restart the Gateway"
-  disabled_by_default: true
-
-uart:
-  id: uart_bus
-  tx_pin: ${pin_efrTX}
-  rx_pin: ${pin_efrRX}
-  baud_rate: 115200
-  stop_bits: 1
-
-stream_server:
-  uart_id: uart_bus
-  id: ss
-  port: 6638 # optional, default is 6638
-
-binary_sensor:
-  - platform: stream_server
-    stream_server: ss
-    name: "TubesZB Serial Connected"
-
-zeroconf:
-  - service: tubeszb
-    protocol: tcp
-    port: 6638
-    txt:
-      version: 1.0
-      name: TubesZB
-      radio_type: ezsp
-      baud_rate: 115200
-      data_flow_control: software