backup 20240718

esphome/sensors/sen0395.yaml

@@ -0,0 +1,73 @@
+uart:
+  id: uart_bus
+  tx_pin: GPIO13
+  rx_pin: GPIO14
+  baud_rate: 115200
+  debug:
+    direction: BOTH
+    dummy_receiver: true
+    after:
+      delimiter: "\n"
+    sequence:
+      - lambda: UARTDebug::log_string(direction, bytes);
+
+binary_sensor:
+  - platform: gpio
+    name: mmWave
+    id: mmwave
+    device_class: occupancy
+    pin:
+      number: GPIO15
+      mode: INPUT_PULLDOWN
+      
+number:
+  - platform: template
+    id: mmwave_distance
+    name: mmWave distance
+    icon: mdi:arrow-left-right
+    entity_category: config
+    min_value: 0
+    max_value: 800
+    initial_value: 315
+    optimistic: true
+    step: 15
+    restore_value: true
+    unit_of_measurement: cm
+    mode: slider
+    set_action:
+      - switch.turn_off: mmwave_sensor
+      - delay: 1s
+      - uart.write: !lambda int cm = (int)ceil(x / 15.0);
+          std::string cms = "detRangeCfg -1 0 " + to_string(cm);
+          return std::vector<unsigned char>(cms.begin(), cms.end());
+      - delay: 1s
+      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
+      - delay: 1s
+      - switch.turn_on: mmwave_sensor
+
+switch:
+  - platform: template
+    name: UART target output
+    id: uart_target_output
+    entity_category: config
+    internal: ${uart_target_output_disabled}
+    optimistic: true
+    assumed_state: false
+    turn_on_action:
+      - logger.log: "UART Target Output On"
+      - switch.turn_off: mmwave_sensor
+      - delay: 1s
+      - uart.write: "setUartOutput 2 1 1 1"
+      - delay: 1s
+      - uart.write: "saveConfig"
+      - delay: 3s
+      - switch.turn_on: mmwave_sensor
+    turn_off_action:
+      - logger.log: "UART Presence Output Off"
+      - switch.turn_off: mmwave_sensor
+      - delay: 1s
+      - uart.write: "setUartOutput 2 0"
+      - delay: 1s
+      - uart.write: "saveConfig"
+      - delay: 3s
+      - switch.turn_on: mmwave_sensor