backup 20240718

esphome/cfg_experimental/tuya-plug-001.yaml

@@ -0,0 +1,76 @@
+
+substitutions:
+  device_name: "tuyaplug001"
+  friendly_name: "tuya plug 001"
+  comment: "eps-02S, tuya-hack"
+  location: "zolder"
+  api_password: !secret tuya_plug_api
+  ota_password: !secret ota_password
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  gateway: !secret ip_gateway
+  subnet: !secret ip_subnet
+  ip: !secret tuya_plug_001_ip
+  pin_relay: GPIO14
+  pin_button: GPIO1
+  pin_status: GPIO13
+  pin_cf: GPIO05
+  pin_cf1: GPIO04
+  pin_sel: GPIO12
+
+
+
+packages:
+  board: !include boards/esp01.yaml
+  connection: !include common/wifi.yaml
+  device_base: !include common/common.yaml
+  status: !include templates/status.yaml
+  logger: !include templates/nologger.yaml
+
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: ${pin_button}
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    name: "Button"
+    on_press:
+      - switch.toggle: relay
+
+switch:
+  # the power relay
+  - platform: gpio
+    id: relay
+    pin: ${pin_relay}
+    name: '${device_name}'
+    restore_mode: RESTORE_DEFAULT_ON  # attempt to restore state on start and defaults to OFF if failed
+    icon: mdi:power-socket-de
+
+sensor:
+  - platform: hlw8012
+    model: BL0937  # note that the model must be specified to use special calculation parameters
+    current_resistor: 0.001  # adjust it according to the actual resistor value on board
+    voltage_divider: 2012  # (2008.1K)/998 = 2004, adjust it according to the actual resistor values on board
+    sel_pin:
+      number: ${pin_sel}
+      inverted: true  # the logic of BL0937 is opposite from HLW8012
+    cf_pin: ${pin_cf}
+    cf1_pin: ${pin_cf1} 
+    current:
+      name: '${device_name} Current'
+    voltage:
+      name: '${device_name} Voltage'
+    power:
+      name: '${device_name} Power'
+    energy:
+      name: '${device_name} Energy'
+      # convert to kWh
+      filters:
+        - multiply: 0.001
+      unit_of_measurement: 'kWh'
+      accuracy_decimals: 4
+    update_interval: 10s
+    change_mode_every: 3