updated atom

esphome/esp32-atom-matrix.yaml

@@ -0,0 +1,120 @@
+substitutions:
+  esp_name: "esp32-atom-matrix"
+
+esphome:
+  name: ${esp_name}
+  comment: ${esp_name}
+
+
+esp32:
+  board: m5stack-atom
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret esp32-atom-matrix_api
+
+ota:
+  password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: ${esp_name} fallback
+    password: !secret fallback_password
+
+captive_portal:
+
+globals:
+  - id: display_index
+    type: int
+    restore_value: no
+    initial_value: '7'
+  - id: display_index_def
+    type: int
+    restore_value: no
+    initial_value: '17'
+
+
+# Define I2C interface
+i2c:
+  sda: 25
+  scl: 21
+  scan: true
+  #frequency: 200kHz
+
+font:
+  - file: "fonts/5x5.ttf"
+    id: matrix_font
+    size: 10
+
+binary_sensor:
+  - platform: gpio # btn
+    id: button
+    pin:
+      number: 39
+      inverted: true
+# --- End if binary_sensor: --- #
+    
+light:
+  - platform: fastled_clockless
+    chipset: WS2812B
+    pin: GPIO27
+    num_leds: 25
+    rgb_order: GRB
+    name: "led_matrix"
+    id: led_matrix_light
+    default_transition_length: 0s
+    color_correct: [50%, 50%, 50%]
+    restore_mode: ALWAYS_ON
+
+display:
+  - platform: addressable_light
+    id: led_matrix_display
+    addressable_light_id: led_matrix_light
+    width: 5
+    height: 5
+    rotation: 90°
+    update_interval: 200ms
+    lambda: |-
+          // Draw a bulls-eye pattern
+          Color red = Color(0xFF0000);
+          Color green = Color(0x00FF00);
+          Color blue = Color(0x0000FF);
+          it.printf(id(display_index), -4, id(matrix_font), blue, TextAlign::TOP_LEFT, "Tim");
+          if(id(display_index) <= id(display_index_def)*-1)
+          {
+            id(display_index) = 7;
+          }
+          else
+          {
+            id(display_index) -= 1;
+          }
+# --- End of light: --- #
+
+# sensor:
+#   - platform: mpu6886
+#     address: 0x68
+#     update_interval: 1s  # Defaults to 60s, but seems to work fine up to at least 300ms
+#     accel_x:
+#       name: "MPU6886 Accel X"
+#     accel_y:
+#       name: "MPU6886 Accel Y"
+#     accel_z:
+#       name: "MPU6886 Accel z"
+#     gyro_x:
+#       name: "MPU6886 Gyro X"
+#     gyro_y:
+#       name: "MPU6886 Gyro Y"
+#     gyro_z:
+#       name: "MPU6886 Gyro z"
+#     temperature:
+#       name: "MPU6886 Temperature"