cleaned for new home

esphome/archive/wekker.yaml

@@ -0,0 +1,100 @@
+substitutions:
+  device_name: "wekker"
+  friendly_name: "wekker"
+  comment: "esp32, lcd wt32-sc01"
+  location: "slaaplamer"
+  api_password: !secret wekker_api
+  ota_password: !secret ota_password
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  gateway: !secret ip_gateway
+  subnet: !secret ip_subnet
+  ip: !secret wekker_ip
+  # pin_bl: GPIO23
+  # pin_clk: GPIO14
+  # pin_mosi: GPIO13
+  # pin_miso: GPIO12
+  # pin_cs: GPIO15
+  # pin_dc: GPIO21
+  # pin_lcdrst: GPIO22
+  # pin_sda: GPIO18
+  # pin_scl: GPIO19
+
+esphome:
+  name: ${device_name}
+esp32:
+  board: esp-wrover-kit
+  framework:
+    type: arduino
+
+# packages:
+#   device_base: !include includes/common_settings.yaml
+
+#esp32_ble_tracker:
+
+#bluetooth_proxy:
+#    active: true
+
+# time:
+#   - platform: homeassistant
+#     id: homeassistant_time
+
+# output:
+#   - platform: gpio
+#     pin: GPIO23
+#     id: tst_Backlight
+
+# light:
+#   - platform: binary
+#     name: "${friendly_name} Back Light"
+#     output: tst_Backlight    
+#     id: ${id_prefix}_backlight
+#     restore_mode: ALWAYS_ON
+
+# spi:
+#   clk_pin: GPIO14
+#   mosi_pin: GPIO13
+#   miso_pin: GPIO12
+
+# display:
+#   - platform: ili9xxx
+#     id: ${id_prefix}_display
+#     model: ST7796
+#     cs_pin: GPIO15
+#     dc_pin: GPIO21
+#     reset_pin: GPIO22
+#     rotation: 270
+#     pages:
+#       - id: page1
+#         lambda: |-
+#           it.printf(64,0, id(my_font), TextAlign::TOP_CENTER, "WT32-SC01");
+#           it.strftime(64, 40, id(my_font), TextAlign::BASELINE_CENTER, "%I:%M:%S %p", id(homeassistant_time).now());
+#           it.printf(64, 60, id(my_font), TextAlign::BOTTOM_CENTER, "Time");
+#       - id: page2
+#         lambda: |-
+#           it.printf(64,0, id(my_font), TextAlign::TOP_CENTER, "WT32-SC01");
+#           it.printf(64, 40, id(my_font), TextAlign::BASELINE_CENTER, "Hello Loryan!");
+#           it.printf(64, 60, id(my_font), TextAlign::BOTTOM_CENTER, "Hi from down here");
+
+# font:
+#   - file:
+#       type: gfonts
+#       family: "Open Sans"
+#     id: my_font
+#     size: 20
+
+# color:
+#   - id: my_red
+#     red: 100%
+#     green: 3%
+#     blue: 5%
+#   - id: my_white
+#     red: 100%
+#     green: 100%
+#     blue: 100%
+
+# interval:
+#   - interval: 5s
+#     then:
+#       - display.page.show_next: wt32_sc01_display
+#       - component.update: wt32_sc01_display